Drilling Tool Luhai non-magnetic drill collars are made from non-magnetic materials with low-magnetic permeability. API monogram, serial number, OD,ID, type and size of connections are stamped on recessed mill flats. Magnetic Properties of Non-magnetic Drill Collar When MPS=1 105/4 A/m Relative magnetic permeability 1.1010 Magnetic Field Gradient B0.05 T
SPIRAL DRILL COLLAR Drilling Tool China drilling motor
I , summary The calibration device is made of high quality 304 stainless steel materials, surface polishing processing, clamping device, discharge mechanism using tap water as hydraulic source, using the two position four way directional control valve, regulating the flow of copper with stainless steel ball valve core, which has the advantages of high precision, compact structure, long service life, convenient operation, simple maintenance and other advantages of this product. Users are responsible for one year. Our products are of reliable quality, the implementation of abide by the contract, the customer first, enjoy preferential price according orders. Welcome to contact. Ii , main technical parameters 1, calibration device accuracy: level 0.2. 2, measured water meter caliber: 15-5, 20-5, 25-5 only, ( 32), 40-1 Only, 50-1 only. 3, measurable water meter technical indicators: for the full performance test Or the production of water meter repair. 4, instantaneous flow indicator adopts glass rotor flowmeter group, the Measured accuracy is not less than 2.5% Specific model specifications are as follows: Lzb-15 4-90l/h, lzb-25 70-800l/h. Or use special specifications. Lzb-50 450-8000l/h, 15-50mm water meter calibration device plus one Lzb-80 7-31.5m3/h. 5, workload volume: 30 liter graduated cylinder one 300 liter graduated cylinder one 6, the use of water work pressure: 0.3-0.5mpa. 7, clamping device telescopic distance is: 15-25mm calibration device for 50mm, 15-50mm calibration device 60mm.
Desp With a reed switch, a transmitting device and a valve base meter; a holzer transmitting device and a valve base meter are arranged in the movement Features Bring hard ladder price with pre payment
Lora wireless remote holzer read only meter Des With a dry reed pipe, a signal transmitting device without a valve base meter, and a holzer transmitting device inside the movement without a valve base meter Features Mechanical and electronic parts are completely separated, easy maintenance, mechanical and electronic transmission unit operates independently, without mutual influence, convenient maintenance, convenient maintenance, than rf card launch far, convenient for users, wireless networking, handset copy.
Description The ordinary water meter is equipped with non-magnetic remote transmission lora wireless. Features The complete separation of mechanical and electronic parts, no magnetic field interference, easy maintenance, mechanical and electronic transmission unit operates independently, without mutual influence, convenient maintenance, launch far than rf card , convenient for users, wireless networking, handset copy.
Description Applicable to the movement of the holzer signal device, without the valve base meter. Features Only meter reading, network remote transmission, urban networking, mechanical and electrical separation.
Description The utility model is provided with a reed switch, a transmitting device and a valve base table, and a holzer transmitting device and a valve base table are arranged in the movement Features With the ladder price, with prepaid fees, you can network in the city. It is a product which takes the place of card meter and has remote monitoring function.
Aluminum Expanded Metal Mesh Panel with PVDF or powder coated is a kind of high-grade architectural ornament material for buildings like business center, subway station, airport, train station and so on. Aluminum Expanded Metal Mesh Panel with PVDF or powder coated can keep more than 15 years, and it can be processed into many different shapes by your design. People usually use aluminum perforated panel with acoustic wool, So that it can be sound insulation. Many of airport, subway, station, cinema, KTV and train station use People usually use aluminum perforated panel with acoustic wool. Technical Specification: Coating: PVDF or Powder coated, Color: Follow your requirements, Thickness:2.0~4.0mm,or according to your requirements, Size: Follow your design (less than 1800 x 6000mm) .
Tempered glass wholesaler We are one professional tempered glass wholesaler. Tempered glass is made from annealed glass via a thermal tempering process as "safety glass. " Tempered glass can be with holes or cutouts/hinges/grooves/notch and polished edges, beveled edges, chamfered edges or grinding edges, then processed into tempered laminated glass, tempered insulated glass, etc.
Tantalum tube Introduction: ShinTek can supply varieties of Refractory metal fabricated products, including Molybdenum (Mo), Tungsten (W), Tantalum (Ta), Niobium (Nb) fabricated products, e.g. ingot, forgings, rods, plates, sheets, foils and assembled products. They are very popular used in a wide of industries, including FPD/Touch sensor, high temperature furnace, medical / nuclear radiation shielding, aviation, specific tools, optical glass, semiconductor, chemical anti-corrosion, superconductor, etc... Tantalum tube specifications: 1. Pure Tantalum Products 2. Purity: =99.95%, 99.99% 3. Dimension: Per customer's requirement; 4. Annealed ShinTek can supply different types of Tantalum, including Tantalum Foils, Tantalum Sheets, Tantalum Plates, Tantalum Rods / Bars, Tantalum tube, Tantalum Forgings, Tantalum Ingots.
Mechanical Service In order to reach the customer's requirements, we have expanded our Machining Services. We now specialize in other services such as Deep Hole Drilling, Precision Grinding, and Welding. Each time we came upon a part which required an outside Machine Shop service, we asked ourselves if we could do that service in workshop. Step by step we added a broad range of different capabilities. The first service that we added was Welding. Customer demand required that we not only just machine, but also that we fabricate. We now employ welders that specialize in TIG, and MIG welding. A bit later we decided to add a Gundrill machine to compliment our growing Honing Department. We are able to drill from 1/8 inch to 20 inches diameter, in all types of materials. Most of the time we will drill a hole on our GunDrill, and then we can Hone it to a precise tolerance and a mirror finish. Recently we have added a couple of machines to expand our Grinding capabilities.
(2) Lint free; (3) Soft touch; (4) Well color fastness, high water and oil absorbency (5) Good cleaning power for oil, water etc. (6) high cleaning capability width:210cm weight:45-90gsm
Farm gate, cattle panel, star picket post, temporary fencing.FOB, CIF, CNF & CFR
Gate valves, globe valves, check valves, ball valves, butterfly valves, strainers, pumps, fittings.
ï¼·hen talk about carbon steel long radius elbows, Our hometown Cangzhou City, Hebei Province is the origin of carbon steel pipe fittings, and our factory is located in the city. We are a professional manufacturer and supplier in carbon steel pipe fittings, have been in this area for more than 36 years, with full experience in carbon steel pipe fittings production and exporting. We have cooperated with State Grid, Simens and Petrochina, also we have exported our carbon steel pipe fittings, include carbon steel long radious elbows to more than 20 countries and areas. We canâ??t guarantee our price is the lowest, but we guarantee our quality is best. SGS and Pony company have cooperated with our factory for more than 6 years, welcome to contact with us for carbon steel pipe fittings order, you will be satisfied with our quality and price, also the service.
Elbow refers to the pipe fitting that changes the direction of the pipe in the piping system. Elbow Angle points, 45, 90, 180 three most commonly used, in addition, according to the needs of the project, but also including 60�° and other abnormal Angle; According to the production process, it can be divided into welding elbow, punching elbow, pushing elbow, casting elbow and so on. Elbow materials include cast iron, stainless steel, alloy steel, malleable iron, carbon steel, non-ferrous metals and plastics, etc. Types: 15 degree, 30 degree, 45 degree, 90 degree, 145 degree, 180 degree R=3d, 4d, 5d, 6d, 7d, 8d, 10d, 20d Standards: asme/ansi b16.9, b16.28, mss sp-43 and so on Jis b 2311/2312/2313 and so on Din 2605, 2615, 2616, 2617 and so on Connect Method: Grooved Surface Treatment: Epoxy/Painting/Galvanized/Darcomet
Tee is also known as pipe fitting tee or tee pipe fitting, tee joint, etc. Used mainly to change the direction of the fluid, used in the main pipe to branch pipe. Can be classified by pipe diameter size. General carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum alloy, plastic, argon chromium leaching, PVC and other materials production. Our range is available in various specifications and finds application in chemicals, fats & fertilizers, ship builders, paper, cement and construction industries. Features: High tensile strength Dimensionally accurate Corrosion resistance Durability Fine finish
Steel pipe caps are used to close pipes and serve the same purpose as pipe plugs. The form of the blind plate is similar, except that the blind plate is removable and the welded pipe cap is not removable. The design of the pipe cap includes a convex pipe cap, a cone shell, a reducer section, a flat cap and a tightening mouth. The characteristics of the pipe cap: 1, health, non-toxic: This product is a green building material, can be used for pure drinking water pipeline system. 2, heat resistance: under the specified long-term continuous working pressure, the water temperature of the pipeline can reach 95â??. 3, corrosion resistance, no scaling: can eliminate the pipe scaling blockage and basin, bathtub yellow rust. 4, heat preservation and energy saving: thermal conductivity is only metal.
Reducers, also known as size heads, are used to connect pipes of different sizes; Generally, it is divided into concentric reducer and eccentric reducer. When the projection of the two ports of the reducer is concentric, it is called concentric reducer, and the projection of the eccentric reducer is a small circle cut in the outer circle. The roundness of the reducer shall not be greater than 1% of the outer diameter of the corresponding end, and the allowable deviation is �±3mm. The material of the reducer is made of SY/T5037, GB/T9711, GB/T8163, ASTM A106/A53 GRB, API 5L, APT5CT, ASTM A105, ASTM A234, ASTM A106, DIN German standards and customer requirements.
