1.Single-side, brighter and thinner. 2.Aluminium frame, width of frame molding: 35mm (all around the frame) 3.The overall depth of the light box is just 28 mm. 4.Screw frame design, the cover is fixed by screws, durable, hard to destroy.When you want to change picture, you need to loosen the screws, fit for public place. 5.Narrow frame, fit for small light box normally, maximum size is 120*80cm. 6.Work with t5 or led lighting, used for indoor. 7.Thin, transparent and protective front sheet 8.Thin back board for stability 9.Wall mounted. Standard export packing in plywood.
1. Single-side, brighter and thinner. 2. Aluminum snap frame, width of frame: 20mm (all around the frame) 3. The overall depth of the light box is just 16 mm. 4. Custom sizes and alternative colors are available. 5. Can be manufactured with rondo corners if requested. 6. Narrow frame, fit for small light box normally, maximum size is 90*60cm. 7. Leds offer low power consumption, energy saving and a long life cycle. Lamp life is up to 20, 000 hours 8. Thin, transparent and protective front sheet 9. Thin, organic back board for stability 10. Wall mounted. Carton or plywood.
1. Single-side, brighter and thinner. 2. The thickness is 34mm. Frame width is 33mm. 3. Single side, snap frame (4 sides could be open) and it is easy to change pictures. 4. Work with t5 or led lighting, used for indoor. 5. Can be manufactured with rondo corners if requested. 6. Thin, transparent and protective sheet 7. Back board: aluminum-plastic panel for stability 8. Maximum size: 1200 x 800mm we suggested. Carton or plywood.
1. Single-side & magnetic frame design, several designs, easy to change pictures with pvc cupule. 2. The color of out frame and front plate's edge are the same, wholly looks no gap. 3. The overall depth of the light box is just 48 mm 4.Custom sizes and alternative colors are available. 5. Can be manufactured with rondo corners if requested. 6. Work with t5 or led lighting, used for indoor. One year's guarantee for fluorescent tube or led . Led working power is 12v; it is safer and has parallel standard power supply. Lamp life is up to 20, 000 hours 7. The light box can be hanged on the ceiling by tubes, chains, or other special metal fittings. 8. Thin, transparent and protective front sheet 9. Thin back board for stability 10. Wall mounted Carton or plywood
W single side waterproof light box (70 mm flat profile / 45íp with mitred corners. Fully water-proof, width of frame molding: 70mm (front frame all around) . Single side, screw-locking at only one side.The overall depth of the light box is just 44 mm. The aluminum alloy has been oxidated and it is very nice and durable. Axis and pressure poles are attached to easily open the light box and install. Edge lighting technology, light is soft and mild, brightness is very equal, which is very comfortable for eyes .The graphics are fixed by magnetic strip (not double sides glue), which makes it easy to change pictures.Front clear protector sheet .Back board for stability (2mm aluminium-plastic panel).The wire is 2m normally and is external(on the back of the box), water-proof without plug. Wall type, allowing four mounting holes on two short sides for installing before delivery. Safety packing: plastic film, special foams, hardboard and it will be reinforced with iron frame. The individual packing and air packing (plywood) will be charged extra at cost
Hanka Technology Co., Ltd. is a manufacturer specialized in developing, producing and marketing financial handling equipment, such as : 1. Banknote Counters and Value counters. 2. Vacuum Counter: Desk-top, floor type. 3. US Bill Detector, EURO Notes Detector and Detectors for all kinds of local notes. 4. Binding Machines: Binding and Cross Binding for 100pcs and 1,000pcs. 5. Electric Coin Sorter and Counter: For EURO, USD and British Pounds etc.. 6. Automatic Teller Machine (ATM); 7. paper shredder. 8. Fingerprint Cabinet and boxes.
Hanka Technology Co., Ltd. is a manufacturer specialized in developing, producing and marketing financial handling equipment, such as : 1. Banknote Counters and Value counters. 2. Vacuum Counter: Desk-top, floor type. 3. US Bill Detector, EURO Notes Detector and Detectors for all kinds of local notes. 4. Binding Machines: Binding and Cross Binding for 100pcs and 1,000pcs. 5. Electric Coin Sorter and Counter: For EURO, USD and British Pounds etc.. 6. Automatic Teller Machine (ATM) 7. Paper shredder. 8. Fingerprint Cabinet and boxes.
Idm ch-480net Brief introduction Idm ch-480net pdh multiplexer transmits 16 e1 and two 100mbps ethernet networks over one or two fiber channels. The optical interface supports simple als function, code of e1 interface is hdb3 which meets all the international standards. It also has perfect monitoring and alarm function, high degree of integration, low power consumption and stable performance. Both desktop type and integrated type are available. 220vac/-48vdc power supply alternative. It can be widely used in the mobile base stations, remote module of the switch and ddn private network and etc. Features 1.Provide standard 16e1 transmission and two 100m ethernet. 2.Ethernet ports support vlan and flow control. 3.155mbps speed rate of the optical interface and transmission distance more than 50km. 4.Support e1 loopback of cot (central office terminal) and rt (remote terminal), easy to test and manage. 5.Optical interfaces with 1+1 channel protection.(either one fails, the other will back it up) 6.Nms interface optional (rs232/ethernet). Specifications Power supply 220vac/-48vdc Consumption: 40w¦10% Optical interface Rate 155mbps¦50ppm Wavelength 1310nm/1550nm Physical connector Fc/sc Sensitivity Better than -36dbm E1 interface Channels 16 Rate 2.048mbps¦50ppm Comply with Itu-t g.703 Code Hdb3 Impedance 75 unbalanced and 120 balanced Ethernet interface Rate 100mbps, 10m/100m auto-negotiation Comply with Ieee802.3, 10/100base-tx Duplex Full/half auto-negotiation Operating environment Temperature: 0¦c~40¦c Humidity: 90% (non- coagulation) Dimensions 440mm+230mm+45mm (width + depth + height)
63e1 sdh/mstp multiplexer Brief introduction Idm mstp155-63 is wide narrow-band integrated optical fiber transmission equipment base on sdh/mstp technology, it can directly connected to the remote pdh multiplexer, optical modem and multi-service optical terminal and so on, integration of sdh transmission unit, e1 crossing unit and integrated service accessing unit, to adapt to various network topology can be set as a multi-service access, sdh transmission, pdh optical access functions of the small mstp equipment. Powerful network management functions, it can configure, failure and data statistics, real-time monitoring of network performance. Features 1.Two stm-1 optical interface, provide 1 +1 channel protection. 2.Provide 2mm connector, up to support 63 e1. 3.2-channel n íß 64k (n = 0 ~ 31) of the v.35/v.11 channel. 4.Provide e1, ethernet, v.35 and voice service optional. 5.Provide 4-channel ethernet physical isolation, to achieve n íß 2.048mbps bandwidth. 6.Support point-to-point, chain-shaped and ring network. 7.Comply with the itu-t g.813 standards and fully meet the timing accuracy. 8.Powerful network management features, online real-time monitoring. 9.Standard 19-inch 1u chassis structure, easy to install. Specifications Optical interface Rate: 155mbpsía4.6ppm Fiber mode: single/multi-mode Consumption: -15 ~ -8dbm Wavelength: 1310nm/1550nm Physical connector: fc/sc Sensitivity: better than -32dbm
SPC-10/100/1000M Series Media Converter can be used in the telecommunication IP MAN broadband optical network solution for its steady performance and powerful function.It convert 1000bps Ethernet copper port to optical port,up to 80km distandce on single-mode fiber without any relay device.It support auto-sending 10/100/1000Mbp half/full duplex topology,and MDI/MDI-X auto recognize. Selectable SC, FC, ST optical port makes the networks more flexible and feasible for the possibility of cost reduction. Package: carton Size:22X16X8cm.
PC, UPC, APC multi skive project High return loss*Low insertion loss High reliability and stability Available for both SM, MM, simplex and duplex 0.9mm, 2.0mm, 3.0mm cable diameter option. Package: Plastic bag.
Cell phone dangle.
Technical parameters Name:flexible led display model:flc-2500 Pitch:20mm color:167m Pixel:1r1g1b r:625a5nm g: 520a5nm b: 4705nm Viewing angle:120 Density:2500 dots/sq.M led life:100, 000 hrs Brightness level:16 levels Working voltage:dc 5v Brightness(white):2700nits power:70w/sq.M.Max Control mode:vga synchronous display Unit size:2.56m(width) 2.56m(height) Fresh frequency:60hz weight:7·½8kg/sq.M Innovation frequency 600hz Optimal visual distance:6m Drive mode:constant current Weather protection:ip44 Display port:dvi Installing mode:hang Display mode:1024768·+12801024 Package:flight case Working temperature:-10+50 Ambient relative humidity:10%+90% Remark1·½pixel density is custom-made Size is custom-made The flexible led display is formed By some units. Light weight and small volume, 20 square meters of flexible led display can be packed in one flight case, which saves large amount of transport charge.
Features: *Digital Color display *Simultaneous X and Y views *9 Sec.splice time,40 Sec.tube-heat time *Large capacity internal battery *SYSTEM TEST ensures the best working condition *User programmable *Auto check fiber end face *Auto calibrate parameters *Store 8000 groups of splice results *Multiple language options Specifications: Applicable fibers: SM,MM,DS,NZ-DS,EDF; Cladding diameter:100 to 150um; Coating diameter:100 to 1000um; Fiber cleaved length:8~22mm(standard); Splicing mode:Auto&Manual; Average splice loss:0.02dB(SM),0.01dB(MM),0.04dB(DS),0.04dB(NZDS); Return loss:í¦ 60dB; Environment conditions:-25~50íµ(operation temperature),0~95% RH (humidity),0~5000m (altitude); Storage environment:-40~80íµ(temperature),0~95%RH(humidity); Protection sleeve length:20mm,40mm,60mm; Tension test:2.0N (Standard); Language: English,Chinese,Korea,Russian,Spanish etc; Interface:RS232 interface&video output;AC adaptor:85~260V input voltage; Power supply:Internal battery:12V voltage,10Ah, up to 200 times of continuous splices and heats;DC adaptor:12V voltage,optional multipurpose external battery; Dimensions:160(W)í-160(H)í-180(D)mm; Weight:4.2kg; Standard carton
Brand-new CY-T2101 OTDR It is high cost performance:high quality but low sale price.It's available for export worldwide Features: *Lightweight *Long battery life *High performance *Automatic measurement *Comprehensive analysis Specifications: Wavelength(nm):1310 nmí+20nm,1550nmí+20nm; Dynamic Range(dB):24dB,22dB; Event Dead Zone(m):í_5m,í_5m; Attenuation dead zone(m):í_25m,í_25m Sample Distance:50cm; Sample data count: 2000; Distance Resolution:10cm; Attenuation Resolution:0.001dB;Reflection Resolution:0.01dB; Operation temperature:0ípC -40ípC; Storage temperature:-10ípC - 60ípC; Humidity: 0~90RH(no condensation); Monitor: 5.1 STN LCD; Interface: RS232 DIN5; Memory capability: Typical storage of 150 curves; Power Supply: 14.4V/2.1AH Polymerization lithium battery,more than 300 life times and 8 continuous working time; Max. pulse width: 10µs; Dimensions: 258mmí-145mmí-70mm; Weight:1.8Kg; Standard Package: CY-T2101 OTDR, lithium battery, Charger, Manual Instruction, Carry case; Optional Item: TOOLBOX Disk, TOOLBOX Software, Accessories for upgrading and printing. Standard carton
Optical single fiber Standard carton
It is high cost performance:high quality but low sale price.It's available for export worldwide. Features: *color lcd monitor & 256 magnification *compact & light weight *reversible monitor with control panel on each side *max. Wind velocity of 15m/s *8 sec.Splice time, 40 sec.Tube-heat time *simultaneous x and y views *large capacity internal battery *system test ensures the best working condition *user programmable *auto check fiber end face *auto calibrate parameters *store 8000 groups of splice results *multiple language options Specifications: Applicable fibers: Sm, mm, ds, nz-ds, edf; Cladding diameter:100 to 150um; Coating diameter:100 to 1000um; Fiber cleaved length:8~22mm (standard); Splicing mode:auto & manual; Average splice loss:0.02db(sm), 0.01db(mm), 0.04db(ds), 0.04db(nzds); Return loss:í² 60db; Environment conditions:-25~50íµ(operation temperature), 0~95%rh (humidity), 0~5000m (altitude); Storage environment:-40~80íµ(temperature), 0~95úÑrh (humidity); Protection sleeve length:20mm, 40mm, 60mm; Tension test:2.0n (standard); Language: english, chinese, korea, russian, spanish etc; Interface:rs232 interface & video output;ac adaptor:85í½260v input voltage; Power supply:internal battery:12v voltage, 10ah, up to 200 times of continuous splices and heats; dc adaptor: 12v voltageú¼optional multipurpose external battery; Dimensions:170(w)íß140(h)íß170(d) mm; Weight:3.3kg Standard carton
2002 kawasaki : other zg1000-a Year: 2002 Miles: 27748 engine Size (cc): 0 Exterior: silver Type: sport touring Model: other
Introduction: SK-01F Remote Control Wireless Phone Jammer is the latest information security product, it can form an electromagnetism protection field around the user, thus prevent mobile phone from receiving and transmitting the mobile signals to the base station; thus it can prevent the secret information leakage through your mobile phone, and also eliminate the noise pollution. The model cell phone jammer for completely stopping all mobile phones operating on the CDMA, GSM, DCS, 3G bandwidth, and it can be adjusted the jamming strength depending on different demands. The cell phone jammers are now a necessity for law enforcement and the military to interrupt communications by criminals and terrorists, and also for accomplishing a more cultured society. Features of the SK-01F Remote Control Wireless Phone Jammers: ò Taking use of technology of interference super high frequency. ò Intelligence controlling technology taking charge of the power outputting within the scope of 3 meters. ò Effectively making subsections, just interference downlink and causing no interception of base station. ò The Antenna can swivel type 360 degree rotary adjustment and 90 degree adjustment ò Battery or Mains compatible. ò To keep you away from noise or disturbance of unexpected cellular phone calls or text messages (SMS) ò World wide compatible. ò To block cellular phone communication links within an effective area. ò No transmissions or receptions of cellular phone calls in coverage area. ò All specified frequency bands will be blocked simultaneously. ò For using at meeting rooms, conference rooms, museums, galleries, theatres, concert halls, churches, temples, restaurants, classrooms, training centers, factories, banks, trains, buses etc. ò Can be adjusted depending on different demands. Important Notice: The jamming area is influenced by the location of the cell tower and the obstacles between cell tower & the cellular jammer. It means that in normal condition if the distance is close between the cell tower & the cellular Jammer, it will have very less jamming area. Likewise, if there are obstacles and walls between the cell tower & the cellular phone, the jammer will give more jamming area. 29.5*15*11cm 1.5kg
Introduction: SK-16A portable wireless phone signal jammer is the latest information security product, it can form an electromagnetism protection field around the user, thus prevent mobile phone from receiving and transmitting the mobile signals to the base station; thus it can prevent the secret information leakage through your mobile phone, and also eliminate the noise pollution. The cell phone jammers are now a necessity for law enforcement and private places to interrupt communications by criminals and terrorists, and also for accomplishing a more cultured society. Features of Sk-16A Portable Cell Phone Jammer ò Coolest and lowest priced jammer on the market. ò Portable, Small, Compact and Robust. ò Battery or Mains compatible. ò To keep you away from noise or disturbance of unexpected cellular phone calls or text messages (SMS) ò World wide compatible. ò To block cellular phone communication links within an effective area. ò No transmissions or receptions of cellular phone calls in coverage area. ò All specified frequency bands will be blocked simultaneously. ò For using at meeting rooms, conference rooms, museums, galleries, theatres, concert halls, churches, temples, restaurants, classrooms, training centers, factories, banks, trains, buses etc. ò Easy to operate. Important Note: After charging the Jammer you will see a green led light, however please recharge the Jammer two more times for full battery charging. The jamming area is influenced by the location of the cell tower and the obstacles between cell tower & the cellular jammer. It means that in normal condition if the distance is close between the cell tower & the cellular Jammer, it will have very less jamming area. Likewise, if there are obstacles & walls between the cell tower & the cellular phone, the jammer will give more jamming area. 20*19*6.6cm 0.3kg
