63e1 sdh/mstp multiplexer
Brief introduction
Idm mstp155-63 is wide narrow-band integrated optical fiber transmission equipment base on sdh/mstp technology, it can directly connected to the remote pdh multiplexer, optical modem and multi-service optical terminal and so on, integration of sdh transmission unit, e1 crossing unit and integrated service accessing unit, to adapt to various network topology can be set as a multi-service access, sdh transmission, pdh optical access functions of the small mstp equipment. Powerful network management functions, it can configure, failure and data statistics, real-time monitoring of network performance.
Features
1.Two stm-1 optical interface, provide 1 +1 channel protection.
2.Provide 2mm connector, up to support 63 e1.
3.2-channel n íß 64k (n = 0 ~ 31) of the v.35/v.11 channel.
4.Provide e1, ethernet, v.35 and voice service optional.
5.Provide 4-channel ethernet physical isolation, to achieve n íß 2.048mbps bandwidth.
6.Support point-to-point, chain-shaped and ring network.
7.Comply with the itu-t g.813 standards and fully meet the timing accuracy.
8.Powerful network management features, online real-time monitoring.
9.Standard 19-inch 1u chassis structure, easy to install.
Specifications
Optical interface
Rate: 155mbpsía4.6ppm
Fiber mode: single/multi-mode
Consumption: -15 ~ -8dbm
Wavelength: 1310nm/1550nm
Physical connector: fc/sc
Sensitivity: better than -32dbm
Supplier: Textile products, colour dyes, handloom products, cotton yarns, fabrics, agro chemicals, organic chemicals, inorganic chemicals, pesticides, plastic household products, plastic polymers, fibers raw materials, fibers products, engineering products, mineral & metallurgy products, electronic products, consumer electronics products, cereals, halal products, dairy products, stationary products, beauty and cosmetics products, furniture, gardening tools, tiles & sanitaryware, flavour and fragrances, construction products, kraft paper rolls, grocery items, kitchen utensils, pipes & fittings, paper and pulps products, spices, empty glass bottles, stainless steel products, hardware products, and many more.
Idm ch-480net Brief introduction Idm ch-480net pdh multiplexer transmits 16 e1 and two 100mbps ethernet networks over one or two fiber channels. The optical interface supports simple als function, code of e1 interface is hdb3 which meets all the international standards. It also has perfect monitoring and alarm function, high degree of integration, low power consumption and stable performance. Both desktop type and integrated type are available. 220vac/-48vdc power supply alternative. It can be widely used in the mobile base stations, remote module of the switch and ddn private network and etc. Features 1.Provide standard 16e1 transmission and two 100m ethernet. 2.Ethernet ports support vlan and flow control. 3.155mbps speed rate of the optical interface and transmission distance more than 50km. 4.Support e1 loopback of cot (central office terminal) and rt (remote terminal), easy to test and manage. 5.Optical interfaces with 1+1 channel protection.(either one fails, the other will back it up) 6.Nms interface optional (rs232/ethernet). Specifications Power supply 220vac/-48vdc Consumption: 40w¦10% Optical interface Rate 155mbps¦50ppm Wavelength 1310nm/1550nm Physical connector Fc/sc Sensitivity Better than -36dbm E1 interface Channels 16 Rate 2.048mbps¦50ppm Comply with Itu-t g.703 Code Hdb3 Impedance 75 unbalanced and 120 balanced Ethernet interface Rate 100mbps, 10m/100m auto-negotiation Comply with Ieee802.3, 10/100base-tx Duplex Full/half auto-negotiation Operating environment Temperature: 0¦c~40¦c Humidity: 90% (non- coagulation) Dimensions 440mm+230mm+45mm (width + depth + height)
Global Tech GT-SDH-155A 63E1 SDH is the compact STM-1 level Synchronous Digital Hierarchy (SDH) transmission system compatible with ITU-T standard. It is designed as a modular system with two 155.520Mb/s optical interfaces to provide an ultra-compact, cost-effective and high capacity platform. It provides fully cross-connect between all tributaries, and can be used as Terminal Multiplexer (TM) or an Add-Drop-Multiplexer (ADM) to build point-to-point, ring and chain transmission network. Feature # Achieve Multiplexing from 63 E1 to 2 STM-1 optical interfaces # 1U height, 19 Inch width standard # Service interface * Two STM-1 optical interfaces, SFP optical module (LC connector) * Maximum 63 E1 interfaces compliant with ITU-T G.703, optional unbalanced/ balanced interface # System interface * Ethernet management interface: EMU (RJ45 connector) * RS232 network management interface: CONSOLE (RJ45 connector) * RS232 user channel interface: RS232 (RJ45 connector) * External synchronization interface / Extendable management interface : ETS1/EXM1, ETS2/EXM2 (RJ45 connector) * Engineering Order Wire (EOW) interface: PHONE (RJ11 connector) * UALM and DALM output interface: U/DALMO (DB9 connector) # Timing mode * STM-1 line timing (T11,T12) * Tributary timing from E1-1 to E1-63 (T2) * External timing source input (T31/T32), 2048Kbit/s by default and 2048KHz selectable * External timing output (T41/T42), 2048Kbit/s by default and 2048KHz selectable * ITU-T G.813 internal oscillator * The timing source can be auto-switched according to SSM or operator settings # Supports 1+1 protection and Automatic Protect Switch (APS) with the switching time less than 50ms # Supports Remote power Down Detection (RPD) and Auto Laser Shutdown (ALS) # Supports embedded BERT and various loop back for troubleshooting # Highly efficient management system * Supports NE management based on CLI command via RS232 interface or TELNET * Supports Network management based on PC via unified platform: GTVIEW * Supports three network management types: Traditional DCC management, Inner DCN management (by some VC12 channel) and outer DCN management (by E1 cable via outer EXM interface). # Power system * Two backup power supply * 220V AC or-48V DC single power * -48V DC & 220V AC double power * -48V DC & -48V DC double power * 220V AC & 220V AC double power * Power consumption less than 25W Technical Parameter System Fabric * Cross Connect: 4* 4 VC-4 Optical Interface * Optical Port: S1.1, L1.1, L1.2 * Connector: SC, FC * Wavelength: 1310nm, 1550nm * Coding: NRZ * Max. Spectrum Width(RMS): G.957 * Max. Tx Power: -8/ 0dBm * Min. Tx Power: -13/ -5dBm * Extinction: 8.2/ 10dB * Rx Sensitivity: -28/ -34dBm, BER 10-10 * Rx Overload: -8/ -10dBm, BER 10-10 E1 Interface * Coding: HDB3 * Bit Rate: 2.048Mb/s + 50ppm * Connector: BNC (75) / RJ45 (120) * Standard:ITU-T G.703,G.704,G.823 ETS/EXM interface * Line Clock: E1, STM-1 Optical Link * Internal Clock: Internal Oscillator * Bit rate:2.048Mb/s, 50ppm * Impedance: 120 balanced Ethernet management interface(EMU) * Bit rate: 100Mb/s * Connector: RJ45 Operation Environment * Working Temperature: -10C~ 70C * Storage Temperature: -40C~ 85C * Relative Humidity: 5%~ 95%, non-condensing * No corrosive and solvent gas, no dust and heavy EMI * Power Supply: AC 220V, DC -48V * Power consumption: 25W, 10% * Physical Dimension: 484mm, 44mm, 255mm (width , height , depth).
Supplier: PCM multiplexer, SDH multiplexer, fiber optic equipment, media converter, PDH multiplexer
Supplier: Coir fabric, garments, coir items
Services: Clearing agent, transportation, Etc.
Buyer: Electric items, electronic items
Supplier: Fiber communication products, fiber optic products
Supplier: Telecommunication, fiber optical multiplexer, PDH, xDSL Modem, PCM, MSPP, SDH, interface convertor, switch
Supplier: Optical Fiber Solutions, Communication Solutions, Access Solutions
Supplier: Optical fiber cable, copper fiber cable (cat5, cat5e, cat6), security control system, (syv, sywv)
Services: Trading copany, national electrical system
Buyer: Telecommunication , security system, wiring system
