Alloy 2124 aluminum plate is a high purity form of 2024 and is normally supplied in 1.50 6.00 plate. Available in T851 temper, this plate alloy exhibits good strength retention and creep resistance at elevated temperatures up to 350 degrees. Fracture toughness levels of 2124-T851 plate are significantly higher than 2024-T851. This alloy is recommended for those applications requiring better short-transverse ductility, high strength and good machinability and has excellent exfoliation corrosion resistance. Fatigue properties of alloy 2124-T851 are similar to those of 2024-T851.
Alloy 7050 aluminum plate is the principal choice for aerospace applications, especially in the 3-6 inch thickness range. It exhibits better toughness/corrosion resistance characteristics than the older, more established alloy 7075. Since it is less quench sensitive than most other aerospace alloys, this alloy maintains its strength properties in thicker sections while retaining good stress corrosion cracking resistance and fracture toughness levels. AMS 4050 is commonly associated with 7050, though various manufacturers require their own specifications.
1100 aluminum is the most commercially pure alloy of all the aluminum grades. 1100 aluminum coil and 1100 aluminum sheet are both available for various applications including chemical storage and processing equipemtn. Benefits of 1100 aluminum sheet & coil include a 99% or greater content of aluminum compared to other grades of aluminum. 1100 is a low strength aluminum alloy with excellent corrosion resistance. This grade is best used for welding, brazing and soldering but has poor machinability. 1100 aluminum has great finishing capabilities so it is a great choice for decorative purposes.
Alloy 7475 aluminum plate are a controlled toughness alloy whose values are 40 percent greater than alloy 7075 in the same tempers. This alloys corrosion resistance and fatigue behavior are also equal to, or better than, many of the other high strength aerospace alloys, and is for those applications that require a combination of high strength, superior fracture toughness and resistance to fatigue crack propagation.
Features: 1> movable partition is modernized decoration style.it can separate the space speedly and conveniently.and it has sound insulation and heat insulation and fireproof function; 2> the partition board is made from high density s/s frame, special made rubber, excellent sound insulation cotton and finish board etc.the finish board is flat and hard; 3> the finish board is inserted in the aluminum track, assembled with multi direction wheels;the board can be stored in may different ways; 4> it doesn't need track on the floor, we only hang the track on the ceilings and it can be at the same plane with the ceiling decoration.it won't affect the whole decoration style; 5> around the board, there is sound insulation rubber, it can help to insulate the sound entering; Finishes: there are wide of range face finishes are available :melamine faced MDF or plywood, fabric, carpet, fabric, artificial, leather,wood veneer, high pressure laminate,acoustic panel,white board ect., panels can also be supplied unfinished for field decoration,standard frame color is clear anodized aluminum,custom powder coating colors are available. BUNGE movable partition wall is made of high quality anodized aluminum frame with environmentally composite materials.the panels move on a ceiling track with no requirement of floor guides or rails.,the panel has a standard thickness of 65 mm ,85 mm and 100 mm,and a width up to 1230 mm.Maximum height can reach 17 meters tall. Common Applications: 1.studios, recording rooms, listening rooms, rehearsal rooms and more professionally interspace timbre projects. 2.theaters, indoor gymnasiums, discos, KTV rooms and more performance and entertainment location. 3.meeting rooms, offices, halls, hotels and more sound absorption and secrecy projects. 4.air-port, railways, bus-stops, workshops and more noise reduction projects. About us: Guangzhou Bunge Building Decoration Engineering Co.,Ltd is a professional company in manufacturing Movable Partitions.It also artistically designs and carefully does research and development,.The company has adopted the advance partition technology of USA,Germany and Denmark.We have professional staff with more than 10 years of experience in design,production and installation.
Aluminum formwork for building Aluminum formwork Panel thickness: 4mm Weight: 18-22/kg/m2 Carring capacity: 60kn/m2 Main components: beam, column, wall, prop, Stair, slab, other accessries Model:aluminium alloy 6061-t6 Material: aluminium alloy 6061-t6 Size: wall panel: 50-400(w) x 2700 (h) Deck panel: 400 (w) x 1200 (h) Deck beam: 150(w) x 900/1050 (h) We can also manufacture upon your requested design with different sizes. Advantage:1. Light weight 2. Safe, fast and easy to assemble 3. Easy to maintenance and low cost 4. Great recyelable value 5.High quality concrete pouring(smooth concrete surface) 6. Environmental friendly
Aluminum Formwork For Utility Tunnel Aluminum Formwork Aluminum Alloy Formwork Panel thickness: 4MM Weight: 18-22/KG/M2 Carring capacity: 60KN/M2 Main components: Beam,Column,Wall,Prop, Stair,Slab,Other accessries Material: Aluminium Alloy 6061-T6 Size: Wall Panel: 50-400(W) X 2700 (H) Deck Panel: 400 (W) X 1200 (H) Deck Beam: 150(W) X 900/1050 (H) We can also manufacture upon your requested design with different sizes. Advantage:1. Light weight 2. Safe,fast and easy to assemb le 3. Easy to maintenance and low cost 4. Great recyelable value 5.High Quality Concrete Pouring(Smooth concrete surface) 6. Environmental Friendly
Flat Tie Aluminum Formwork Accessorie Aluminum Alloy Formwork Name: Standard Flat Tie / X Flat Tie / Nominal Wall Tie / Full Wall Tie Material: #45 Steel / Q235 Steel / 40Cr Surface Treatment: Hot Treated / Natural Color Package: packed in bundle by pallet Cetification: ISO9001:2000 Name:Standard Flat Tie / X Flat Tie / Nom inal Wall Tie / Full Wall Tie Material:#45 Steel / Q235 Steel / 40Cr Surface Treatment:Hot Treated / Natural Color Package:packed in bundle by pallet Cetification:ISO9001:2000
Tie rod Aluminum formwork accessories Aluminum formwork Aluminum alloy formwork Material?45# steel orq235 steel 45# steel 45# steel psb830 Diameter(mm) 15/17 10/12 20/22 21/23 18.8/21 15/17 Pitch(mm) 10/6.35 4 10 10 Length(m/pc) 1-6 1-6 1-6 1-6 Weight(kg) 1.5 0.72 2.5 1.47 Tie rod types17mm tie rod12mm tie rod20mm tie roddywidag tie rod Material45# steel or q235 steel45# steel45# steelpsb830 Diameter(mm)15/1710/1220/22, 21/23 , 18.8/2115/17 Pitch(mm)10/6.3541010 Length(m/pc)1-61-61-61-6 Weight(kg)1.50.722.51.47 Surfacenatural, egnatural, egnatural, egnatural, eg Colouroriginal color, Silver, goldenoriginal color, Silver, goldenoriginal color, Silver, goldenoriginal color, Silver, golden Craftcold rolledcold rolledcold rolledhot rolled Pull(kn)45# steel, 140-150; Q235 steel, 90-10050-65230-245180-190
folding aluminum portable stage platform/assembly panel stage
Aluminum Cheap Portable Stage Outdoor Concert Stage Sale
outdoor stage/fashion show stage/aluminum stage platform
SNGN CBN Inserts Application Case IT750- for Brake Drum For example: Workpiece: Brake drum Material: HT250 Hardness: HB190-220 Insert: SNGN120416 Cutting parameter: Vc=390m/min ap=2-3mm f = 0.5mm/r Tool life: 70pcs/edge For comparison only: Other CBN inserts: 45pcs/edge Vc=300m/min
Aluminum LED Profile/Aluminum LED Light/Aluminum Extruded Profile Application 1, Kitchen cabinets LED Lighting 2, Interior accent lighting 3, Furniture production 4 Store shelf LED lighting 5, Exhibition booth/Hotel Hall and hotel room LED lighting 6, Office decoration LED lighting 7, Home using residential building decorations lighting 8, Meeting room decoration led lighting 9, school led lighting decorations 10, Stair led lighting decorative 11, Garden Decoration led lighting 12, Architectural decorative lighting 13, Recessed storage shelves lighting 14, Archway, canopy and bridge edge lighting 15, Amusement park, theater and aircraft cabin mood lighting 16, Emergency hallway lighting 17, Auditorium walkway lighting Features Aluminum LED Extrusion features: 1, Aluminum 6063 material 2, with anodized aluminum for housing 3, available by opal,frost and transparent diffuse PC Cover 4, 0.5m-3m is available to us 5, up to width 11mm LED strip is allowed for this LED profile Advantages Advantage of Aluminium led profile: 1), Designed for flexible led strips. 2), Aluminum profile can dissipate heat much better. 3), High quality aluminum profile makes flex strip more elegant. 4), Provide two types of PC cover: Transparent cover & diffused cover & white Cover 5), Can be recessed mounted and surface mounted & Suspension mounted Suitable for SMD3825,SMD3014,SMD5050,SMD5630 led strips.
Application: This is a specialized profile designed to illuminate the steps in cinemas, nightclubs And many other sites Spec: Suit for LED Strip Width : v
width/height=16*16 Suit for LED Strip Width :
Model numberCL002 Place of original:Foshan City,Guangdong Province China Usage:Window and door Certification:ISO9001,ISO10041 Alloy:Base on customer requiry.Such as:6000,7000 series etc. Temper:T3-T8 Surface finish:Mill finish, anodizing, powder coating, wooden grain,electrophoresis, sandblasting,brush, machinery and chemical polish etc. Color: Silver, black, champagne,bronze, or according to customer requirement Normal Anodizing thickness: 8-12 micro,hard anodized are also available. Normal Power Coating thickness: 60-100 micro Wall Thickness:0.7MM
Model numberpe037 Place of original:guangdong province china Usage:window and door Certification:iso9001, iso10041 Alloy:base on customer requiry.Such as:6000, 7000 series etc. Temper:t3-t8 Surface finish:mill finish, anodizing, powder coating, wooden grain, electrophoresis, sandblasting, brush, machinery and chemical polish etc. Color: silver, black, champagne, bronze, or according to customer requirement Normal anodizing thickness: 8-12 micro, hard anodized are also available. Normal power coating thickness: 60-100 micro Wall thickness:0.9mm
Model numberpe201 Place of original:guangdong province china Usage:window and door Certification:iso9001, iso10041 Alloy:base on customer requiry.Normal is 6063 alloy. Temper:t3-t8 Surface finish:wooden grain Color: according to customer requirement Normal anodizing thickness: 8-12 micro, hard anodized are also available. Normal power coating thickness: 60-100 micro Wall thickness:1mm
DC Quality Deep drawing quality,Less Scrap. Suitable for making cookware and following products: Stock pots Fry pans Tea kettles Pressure cookers Pizza pans Rice cookers Restaurant cookware Coffee urns Electric skillets Bakeware, Bread Makers Stainless cookware bottom plates. CC Quality Good surface, suitable for lighting industry. Applications of our products: Recessed lighting High bay industrial lighting Stress lighting Traffic light reflectors Sports lighting.
