SpecFeature : Artistic CeilingsShape : RectangleType : Metal CeilingsKey Features ALUMINUM COMPOSITE PANEL The front side : Aluminum coated with polyester resin or PVDF resin. Core : Nontoxic low density polyethylene (LDPE). The back side : Aluminum coated with polyester resin or in mill finish. STANDARD SPECIFICATIONS Thickness : 2mm, 3mm, 4mm & 6mm Width : 1220mm, 1250mm, 1575mm 2000 mm Length : 2440mm, 3050mm & 3200mm (max.5meter) Additional colors are available upon customers`request. Material: a) Front: aluminum alloy sheet coated with fluoro-carbon resin (PVDF) or polyester resin (PE) roasting painting b) Core: Normal PE Core (Fire class B2) / Fire Resistance PE Core (Fire class B1) c) Back: aluminum alloy sheet coated with protective film d) Aluminum alloy sheet optional thickness: 0.08mm, 0.1mm, 0.12mm, 0.15mm, 0.18mm 0.21mm, 0.3mm, 0.4mm, 0.45mm, and 0.5mm available. Dimensions: Standard size: 3mm*1220mm x 2440mm (Thickness x width x Length) or 4mm*1220mm x 2440mm Panel thickness: 3mm (usually for interior wall ) , 4mm (usually for exterior wall) Non standard sizes are available: width 730mm - 1550mm,length: maximum 6000mm --- Aluminum Composite Panel --- Introduction: Aluminum Composite Panel is made of the aluminum panel and polyethylene, the surface is painted with fluorocarbon resin and looks noble, elegant and beautiful. It widely uses in the wall system, advertisement and decoration.
SpecFeature : Artistic CeilingsShape : RectangleType : Metal CeilingsKey Features ALUMINUM COMPOSITE PANEL The front side : Aluminum coated with polyester resin or PVDF resin. Core : Nontoxic low density polyethylene (LDPE). The back side : Aluminum coated with polyester resin or in mill finish. STANDARD SPECIFICATIONS Thickness : 2mm, 3mm, 4mm & 6mm Width : 1220mm, 1250mm, 1575mm 2000 mm Length : 2440mm, 3050mm & 3200mm (max.5meter) Additional colors are available upon customers`request.
Aluminum curtain wall Aluminum veneer curtain wall with high-quality high-strength aluminum alloy sheet, the commonly used thickness of 1.5, 2.0, 2.5, 3.0mm, model 3003, the state h24. Its structure is mainly composed of panel, stiffener and angle code. Corner can be directly from the panel bending, stamping, but also in the small edge of the panel riveting corners forming. The ribs and the plate after the welding screw (the screw is welded directly to the back of the board) to make it a solid whole, greatly enhanced the strength and rigidity of the aluminum veneer curtain wall to ensure the long-term use of the formation degree and wind and earthquake resistance. If you need sound insulation, aluminum can be installed inside the efficient insulation materials.
Industrial aluminum products: 1.Material: aluminum alloy 6063 2.Color: customized color is available 3.Shape: round, square, rectangle, triangle, hexagon, octagon, oval or as per the drawings and samples 4.Surface treatment: mill finish, anodized, electrophoresis, powder coating, polish, sandblasting, brushed 5.Deep processing: cutting, drilling, punching, milling, be burring, clearing, tapping etc 6.Application: windows and doors, curtain wall, industrial construction Features After oxidation, the appearance is very beautiful, and dirt-proof, once coated with oil is very easy to clean, assembled into products, according to different load bearing different specifications of the profile, and the use of matching aluminum parts, no welding, more environmentally friendly, and the installation, removal, lightweight and easy to carry, moving very convenient.
Balcony railing specification:,, 1.Height:350-1200mm, 2.Standard height:1050mm or 1100mm, 3.Post distance:,,
PE Coated Aluminium PE Coated Aluminium is flexible, moldable, compact and stable and can be used in a wide variety of applications, but is mainly used in architecture and design. They are used for exterior and interior building cladding or partitions, false ceilings, signage, machine coverings, container structures and more. Most of the time, you will find aluminum composite panels used to make signs that you can see outside of stores and more, and this is because aluminum composites are weatherproof in addition to being lightweight and durable. Three coating options 1. Self-cleaning nano-coating Using nanotechnology, our nano PVDF coatings are self-cleaning using sunlight and rainwater, reducing maintenance and cleaning costs by at least 50%. 2. Durable Coatings Our high-performance coatings are based on polymer resins that are resistant to UV rays, moisture and abrasion. With this coating, we can guarantee a service life of up to 20 years. 3. Glossy coatings We have 3 gloss levels of coating available: high gloss, satin and matte.
- Place of Origin: Foshan, China - Brand Name: GUANG YUAN - Model Number: GY001 - Grade: 6000 Series - Alloy or Not: Is Alloy - Temper: T4-T6 - Surface Treatment: - Mill Finish, Anodizing, Electrophoresis, Powder Coating, Polishing, Brush, Wood Grain, Fluorocarbon Coating, etc. - Deep Processing, Precise Cutting, Drilling, Bending, Punching, CNC and Aluminium Alloy Profile Fabrication - Quality Standard: China National Standard GB/T 5237-2008 - Quality Certificate: ISO 9001:2015, ISO 14001:2015, CQM Certification, SGS - Application: Aluminium Heat Sink - Use purpose: Construction Buildings, villas and residential houses
- Place of Origin: Foshan, China - Brand Name: GUANG YUAN - Model Number: GY001 - Grade: 6000 Series - Alloy or Not: Is Alloy - Temper: T4-T6 - Surface Treatment: - Mill Finish, Anodizing, Electrophoresis, Powder Coating, Polishing, Brush, Wood Grain, Fluorocarbon Coating, etc. - Deep Processing, Precise Cutting, Drilling, Bending, Punching, CNC and Aluminium Alloy Profile Fabrication - Quality Standard: China National Standard GB/T 5237-2008 - Quality Certificate: ISO 9001:2015, ISO 14001:2015, CQM Certification, SGS - Application: Aluminium Heat Sink - Use purpose: Construction Buildings, villas and residential houses
Place of Origin: Foshan, China - Brand Name: GUANG YUAN, DE YUAN NUO - Frame Material: Aluminium alloy - Open Style: Swing - Mesh Material: Stainless steel and fiberglass - Surface Treatment: Anodizing, electrophoresis, powder coating, wood grain, fluorocarbon coating - Color: Silver, champagne, bronze, white, charcoal, black, brown, grey and wooden colors - Quality Standard: AS2047 - Quality Certificate: ISO 9001:2015, ISO 14001:2015, CQM Certification, SGS - Glass Standard: AS2208 - Glass Type: tempered glass, tinted glass, frosted glass, reflective glass, laminated glass and LOW-E glass
Descriptions Aluminium wafer is widely used in many industries including electronics cosmetics pharmaceuticals education auto parts electrical appliances insulation machinery manufacture vehicle space military mould construction printing etc. Cookware such as non-stick pans and pressure cookers hardware such as lamp shades and water heater shell are the largest consumers of aluminium alloy plate and coil. Performance of Aluminum Circle 1. high corrosion resistance,electrical conductivity and thermal conductivity,its small density,good plasticity,through pressure processing can produce all kinds of aluminum; 2. the intensity is low, but has good ductility, formability and weldability; 3. to further improve the corrosion resistance after anodic oxidation, obtain and beautiful surface at the same time; Features: Light Weight Easy Processing Corrosion Resistance Easy Maintenance If you have any questions,please contact us immediately,we will reply in the shortest
Descriptions Aluminium wafer is widely used in many industries including electronics cosmetics pharmaceuticals education auto parts electrical appliances insulation machinery manufacture vehicle space military mould construction printing etc. Cookware such as non-stick pans and pressure cookers hardware such as lamp shades and water heater shell are the largest consumers of aluminium alloy plate and coil. Performance of Aluminum Circle 1. high corrosion resistance,electrical conductivity and thermal conductivity,its small density,good plasticity,through pressure processing can produce all kinds of aluminum; 2. the intensity is low, but has good ductility, formability and weldability; 3. to further improve the corrosion resistance after anodic oxidation, obtain and beautiful surface at the same time; Features: Light Weight Easy Processing Corrosion Resistance Easy Maintenance Main Application Cookware & Electrical Applianes: Anodizing Polishing Non-stick Cookware Rice Cookers Coffee Pots Fat Fryers Lighting Reflectors: Down Lights High Bay Lights Street Lights Construction: Curtain Walls Ceilings
ts of Aluminum Magnesium-Silicon alloy wires stranded in successive layers in opposite direction and the outer layer is right hand direction Z. Natural grease may be applied between the layers of AAAC except the outer layer. STAQNDARD Construction as per ASTM B399, DIN 48201, BS EN 50182, IEC 61089, CSA C49. APPLICATION: AAAC bare conductors are used for primay and secondary overhead power transmission lines having long spans and high resistance to corrosion. Detailed Product Description AAAC (All Aluminum Alloy Conductor) referred to have higher strength but lower conductivity than pure aluminum. Being lighter, alloy conductors can sometimes be used to advantage in place of the more conventional ACSR; Having lower breaking loads than the latter, their use becomes particularly favourable when ice and win loadings are low. We can supply this conductor according to different recognized standards, such as BS EN50182, IEC61089, ASTM B399DIN 48, customer special specification also can be satisfied.
1.Tpye: zlp1000 2. Rated load: 1000kg 3. Lifting speed: 8.7m/min 4. Voltage-3phase: 380v(415v/220v) 5. Frequency: 50hz/60hz 6. Power: 2.0*2 7. Hoist: ltd100 8. Safety lock: lsf310 9. Dia.Of wire rope: 4*31sw+fc-10.2mm 10. Plateform size (l*w*h): (2.5*3)*0.76*1.45m 11. Weight of suspended jibs: 340kg 12. Weight of lifting part: 520kg(steel) 340kg(aluminum) 13. Counter weight: 1200kgs 14. 20gp qty of package: 9sets The weight of lifting part includes platform, hoist, safety locks and electric control system.
Body material: aluminium Membrane: ePTFE Sealing ring: silicone ring Structure: with nut Spec. M12x1.5-10,M5X0.8-10,M6X1.0-10,M10X1.0-10, application:Outdoor lighting lamps, automobile electronic product, communication equipment, sports apparatus and equipment, LED, solar energy and other industries
The dimensions of cold forging heat sink, 1. Outside Diameter: as your request 2. Total Height: as your request 3. Base Thickness: as your request 4. Pin Height: as your request 5. Color: silver, gold, black, red, as your request GLARY has an extensive range of options to provide the optimal cooling solution for your LED application. Our precision forge process provides unique advantages for LED cooling. Forging can produce round and other non-linear shapes that are preferred for LED applications. The forge process uses high pressure to form the material and provides control over the grain structure to provide superior thermal performance. LED`s are generally convection cooled and our forged pin fin arrays provide the best possible thermal performance in ambient environments. Heat sinks can be forged in either aluminum or copper. Sizes range from 40 mm diameter to 350mm and shapes can be almost any shape you need. Standard or modified standard solutions We can provide a solution from our standard product line and model it to ensure that it will provide adequate cooling for your application. Custom design services Our engineers can also work with you to design and model a custom solution optimized to meet the needs of your application. Note: All machined parts are just for your reference, machined parts can not be provided to you, but the original design can be provided. The machined part is belong to the customer who provide the original machined design.
The dimensions of cold forging heat sink, 1. Outside Diameter: as your request 2. Total Height: as your request 3. Base Thickness: as your request 4. Pin Height: as your request 5. Color: silver, gold, black, red, as your request GLARY has an extensive range of options to provide the optimal cooling solution for your LED application. Our precision forge process provides unique advantages for LED cooling. Forging can produce round and other non-linear shapes that are preferred for LED applications. The forge process uses high pressure to form the material and provides control over the grain structure to provide superior thermal performance. LED`s are generally convection cooled and our forged pin fin arrays provide the best possible thermal performance in ambient environments. Heat sinks can be forged in either aluminum or copper. Sizes range from 40 mm diameter to 350mm and shapes can be almost any shape you need. Standard or modified standard solutions We can provide a solution from our standard product line and model it to ensure that it will provide adequate cooling for your application. Custom design services Our engineers can also work with you to design and model a custom solution optimized to meet the needs of your application. Note: All machined parts are just for your reference, machined parts can not be provided to you, but the original design can be provided. The machined part is belong to the customer who provide the original machined design.
Wanxie Power Technolog Co., Ltd Product Range ABC insulation piercing Connectors ABC strain clamp/ ABC Tension Clamp/Gun type Dead end clamps JLC series C type clamps PG parallel groove clamps Cable Copper lug/Aluminium terminal lug/ Bi-Metallic Lugs H type clamp BLMT series torque terminals Quick connector Wedge grounding clamp High voltage cable cleat Transformer clamps/Equipment clamps YZ clamps for hot line work ABC Suspension clamps Anchor NY-G strain clamp for steel wire U type Shackle/Ball-eyes/Ball link Yoke plate/Clevise Shockproof dampers Rod Composite tension insulator/Lighting Arrester Contact Mike Yang International Trade Department Email: Mike@wanxie.cc Skype: wanxiepower Web: www.wanxie.cc Web: https://wanxie.en.alibaba.com Tel: 0086-577-61661881 Fax:0086-577-62698355 Mobile&Whatsapp: 0086-15158533113 Wanxie Power Technology Co., Ltd Address: No.128 Jingwu Rd, Economic Development Zone, Yueqing, Zhejiang, China
Premium Aluminum Composite Panels Welcome to our premium aluminum composite panels, where style and durability converge to redefine your spaces. Crafted with precision and innovation, our panels offer a seamless fusion of elegance and resilience, perfect for a variety of applications. Key Features: Superior Materials, Stylish Design, Easy Installation, Fire Safety, Low Maintenance, Eco-Friendly: Manufactured with eco-friendly processes and recyclable materials, our panels contribute to a sustainable future. Applications: Architectural Cladding, Interior Decoration, Signage and Branding, Furniture and Fixture Experience the perfect blend of style and durability with our premium aluminum composite panels. Explore our range today and transform your spaces with confidence and ease.
We are the manufacturer of the below products: 1. Brucite Mg(OH)2 (use in ACP as Flame Retardant additives, fertilizer, flue gas desulfurization, waste water treatment, etc ) with MgO53%-64% , 2. Magnesium oxide 80%-96% ï¼?used in flue gas desulfurization, fertilizer, animal feeds,etc), it is also called Caustic Calcined Magnesite , with own brucite and magnesite mine with lower SIO2 and Fe2O3 content. Brucite Mg(OH)2 can be used in Alumium composite panel as flame retardant additive. Magnesium hydroxide environmental protection halogen-free flame retardant is a common flame retardant, in addition to flame retardant and smoke elimination performance, and high dehydration temperature, suitable for processing high temperature PP and other polymer flame retardant modification, but also make flame retardant plastic easy to reuse. Representatives of the application of inorganic flame retardant type magnesium hydroxide by chemical decomposition heat absorption and put hot water dilution mass fraction of oxygen in the air, forming insulating layer on the surface of a polymer flame retardant effect of magnesium oxide play are formed by decomposition with non-toxic, smoke, and decomposition product inhibition (aluminum oxide, magnesium oxide) series of chemical stability, so do not produce secondary damage. Aluminum-plastic composite board, referred to as aluminum-plastic board, refers to a 3-layer composite board with plastic as the core layer and aluminum on both sides, and the surface of the product is covered with decorative and protective coating or film (otherwise known as coating) as the decorative surface of the product. Selecting flame retardant core material, the combustion performance of the product reaches the non-combustible grade (B1) or non-combustible grade (A); At the same time, other performance indicators must meet the technical requirements of aluminum - plastic board. So brucite (natural magnesium hydroxide) is the best flame retardant additive.
Leafing and non-leafing aluminum paste is widely used in coatings, inks, plastic masterbatches, textile coatings, and other industries, giving the products excellent metallic feel and angular color effects.
