Find Verified Agriculture And Food Suppliers, Manufacturers and Wholesalers

Vibrating motor
1. The excitation force and power are properly matched, with large vibration force, light body weight, small volume and low mechanical noise.
2. Because the vibration motor is a strong resistance vibration rather than resonance, it has a stable amplitude.
3. The vibration frequency range is large. The vibration frequency of electromagnetic vibration exciter is fixed, which is generally equal to the step rate of power supply. The vibration frequency of vibration motor can be adjusted in a wide range by adjusting the speed, and the vibration frequency and amplitude can be selected arbitrarily according to different routes.
4. Due to the small influence of power fluctuation, the electromagnetic vibration exciter will cause a large change in the excitation force due to the change of voltage, but in the vibration motor, this change is very small.
5. Multi machine combination can realize self synchronization and complete different process requirements.
â?? the direction of exciting force can be changed according to the installation mode of vibration motor.
the exciting force and amplitude can be adjusted steplessly only by adjusting the included angle of the eccentric block.
8. The maintenance is simple. Since the spring is not used like the electromagnetic type, the maintenance work such as clearance adjustment and weight adjustment can be exempted, and only the bearing needs to be repaired regularly.
it can meet the working needs of all kinds of vibrating machinery.

1. Function: AC sampling device and sampling RTU (Remote Terminal Unit) calirbation

1) AC/DC analog value input measurement

2) state variables input measurement

3) remote control execution testing

4) remote regulation function testing

5) digital value input testing

6) impulse input testing

2. AC Power source

It can output AC voltage AC current

accuracy 0.05 class

can provide standards of AC/DC voltage/current power phase power factor frequency energy.

Output method and output electric quantity can be set arbitrarily

3. Data management

It can save search browse print or delete RTU testing data.

Calibrated parameters can be saved permanently

Feature:
-100% virgin raw material
-Double Cut
-First choice for general machining
-Improves ease of control
-Increases metal removal rate
-Breaks swarf into small manageable pieces
-Aluminium Cut
-First choice for non ferrous materials and plastics
-High helix and large flute volume for rapid metal removal

Description

22451-1 Mechanical Seal is used for Mission Magnum Pumps, 3x2x13, 4x3x13, 5x4x14, 6x5x11, 6x5x14, 8x6x11, 8x6x14, 10x8x14.



Type 1-2. seal is identical to Mission pump seal NOV# 22451-1, 648414308 and T1-3.5 is identical to Mission Magnum XP pump seal NOV#24306, 658416102.

Mechanical seal (Tungsten carbide faces), P/N: 22451-1, 648414308; 22451-2, 648414340; 22451-3, 648414357; 22451-9A

Dimensions: 3.5inch, 2.5 inch, 1.875 inch and 1.5 inch
Material: Tungsten Carbide, Viton, SS316 machining parts

Seal, Mechanical (Tungsten carbide faces), P/N: 22451-1, 648414308
Seal, Mechanical (ceramic to carbon face), P/N: 22451-2, 648414340
Seal, Mechanical (silicon to tungsten face), P/N: 22451-3, 648414357
Seal, Mechanical (silicon carbide faces), P/N: 22451-9A
Packing shaft with lantern ring (Graphite), P/N: 25014-04M-B, 661007005
Packing shaft with lantern ring (King), P/N: 25014-04M-BA, 661007008
Packing shaft with lantern ring (Teflon), P/N: 250147-04M-D, 661007011
Packing shaft with lantern ring (Kevlar), P/N: 25014-04M-C, 661007006
Packing, Shaft -M.S. Backup (Graphite), P/N: 648402600
Ring, Lantern, or Lantern Ring, P/N: 648408607
A set of mechanical seal includes Mechanical seal, 3 pcs packings and a pin.

High precision ceramic shaft rods we produce have good heat conductivity , high thermal conductivity. we offer custom ceramic shaft rod with multi sizes and shape due to the ceramic shaft have a wide range use for industry which have own sizes demands and diameters.

Advantages of ceramic shaft rod:

- High thermal conductivity
- Low coefficient of expansion

- High strength
- High temperature resistance
- Chemical resistance
- High resistivity
- Small dielectric constant
- No toxicity


Note: 1.Surface roughness can be reached 0.1�¼m after polished.

2.Size tolerance can be controlled in +-0.10mm with laser machined.

3.Special specifications can be supplied upon requests.


Ceramic materials
�· 95%--99.99% Alumina (Al2O3) �· Silicon Carbide �· Silicon Nitride
TTZ: Magnesia partially stabilized Zirconia (ZrO2)
YTZP: Yttria partially stabilized Zirconia (ZrO2)
ZDY: Yttria fully stabilized Zirconia (ZrO2)

Resin Bond Diamond Grinding Wheel for Carbide
Model: 1A1R, 1A1, 3A1, 1V1, 4A2, 4BT9, 6A2, 11V9, 12A2, 14F, etc

Workpiece Materials: grinding tungsten carbide cutting tools, ceramic , magnetic materials, silicon , sapphire, glass , quartz and HVOF carbide coated,PCD, PCBN, etc

Applicable Industry: carbide inserts (cnc tools), carbide circular saw (woodworking tools), Thermal Spraying Coated, Silicon Wafer Grinding, etc
Carbide Grinding Wheel
Resin bond diamond grinding wheel is grinding tungsten carbide cutting tools, ceramic , magnetic materials, silicon , sapphire, glass , quartz and HVOF carbide coated,PCD, PCBN, etc
Applicable Industry: carbide inserts (cnc tools), carbide circular saw (woodworking tools), Thermal Spraying Coated, Silicon Wafer Grinding, etc
Advantages of resin diamond grinding wheel
* High cutting efficiency, good self-sharpening, less blocking, reducing the grinding burn occurs when the phenomenon of work
* Good flexibility will help to improve the surface roughness, mainly used for rough grinding, semi-fine grinding, polishing and other processes
* Compared to conventional silicon carbide , resin diamond wheel has good material removal rates, longer wheel life and lower grinding costs
* Resin bond diamond wheels generally remove material up to 10 times faster than metal bond wheels

TUNGSTEN CARBIDE ROTARY CUTTER BLADE Z44 Z46
Advantages for our Carbide Alloy Blade
- Use high quality materials according to the purpose of use
- Highly consistent with your requirements
-High precision
- wear-resistant knife edge sharp
- knife surface leveling
Tungsten Carbide Cutting Blades have been used for many years in larger knives. Our Carbide Alloy Bldae and Zund Cutter Blade Knife is very popular recently. For the more details, We have the expertise to assist you and look forward to your inquiry.

It is made in farbic material which is waterproof, soft, durable and nontoxic, it is mainly used for sewing and ironing in clothing industry. Specially designed for hotel, hospital, dry cleaner, airline blanket management, etc.They mainly have three types of materials: PPS, Silicone and Textile.

Diamond Grinding Wheel for Inserts peripheral grinding
Low cutting edge chipping
Good surface accuracy retention
High stock removal efficiency
Unique cutting edge quality

PRODUCT DETAILS
Application:
Mainly used for precise edge grinding of indexable inserts, plane knives, milling, cutting blade, welding blade, machine clip blade made of tungsten carbide, ceramics, cermets, PCD and CBN.
Advantages:
1.Low cutting edge chipping
2.Good surface accuracy retention
3.High stock removal efficiency
4.Unique cutting edge quality
DRAWING&SPECIFICATION
Shape 6A2H,11A2 ,11A2B ,2A2T ,11A2H,12A2T, 15A2T

Suitable Machine D(mm) H(mm) W(mm) T(mm) X(mm)
WAIDA:AP460E 200 60 6,8,10,12 45 6
Wendt:400 Series 400 336 6,8,10,12,15 39 6
Agathon:350 Series 350 200 6,8,10,12,15 27 6
Agathon:400 Series 400 340 6,8,10,12,15 28 6
Suitable for grinding machine:
AGATHON:
400 Series: 400PENTA, 400COMBI, 400SEMI, 400PERI.
350 Series: 350T&B, 350COMBI
250 Series: AGATHON, PA250
Wendt:
400 Series: WAC715, WAC735
350 Series: WAM336
WAIDA:
AP460E
WENT, WBN, WAIDA, VIOTTO, , PETER WOLTERS, EWAG, etc.

M42 steel, otai does not act as material handler .
Otai is stable and reliable supplier for fortune 500 companies at home and abroad, such as thyssenkrupp, china north industries group corporation limited. Otai exports various tool steel and alloy to more than 30 countries from Europe and American, middle east and asia. our steel materials meet DIN/ ASTM/EN/JIS ect different international standards.
The M42 high speed steel, Other Known Names are 1.3247, HS 2-10-1-8, S500, E M42, REX M42�, Dynamax. M42 is a molybdenum series high-speed steel alloy with an additional 8 or 10 percent cobalt, it has superior red hardness and wearing resistance as compared to conventional high-speed steels. This allows for shorter cycle times in production environments due to its higher cutting speeds and from the increase in time between tool changes. M42 steel costs less when compared to those same tools made of carbide.

Gear Hob Cutter Sharpening - CBN Wheel
Model: 4V9, 4BT9, 4V4
Application: High - Speed Steel HSS Hobs
Used Green silicon carbide grinding wheel dress
CBN grinding wheel are CBN (Cubic Boron Nitride) grinding wheels are specially used for gear hob cutter grinding. CBN (Cubic Boron Nitride) due to its hardness, thermal resistance which is higher than diamond's, allowing work at 1,900C (3,500F), and the good chemical resistance of CBN to ferrous alloys. The roughness and sharpness is the most important for the CBN wheels.

The fiberglass chopping blade provided by are produced from high-quality tungsten steel raw materials, with high cutting accuracy, stable quality and long service life. It can be used to cut polyester cotton, polyester staple fiber, polypropylene staple fiber, polypropylene chemical fiber, staple fiber, etc.. The blades can be applied to large scale machines made by

L74.5 W15.5 T0.884mm; L95 W19 T0.884mm; L117.5 W15.6 T0.884mm; L120 W15.8 T0.884mm; L135.5 W19.05 T0.884mm; L140 W19 T0.9mm; L163 W22.4 T0.23mm; L170 W19 T0.884mm; L193 W19 T0.9mm; L213 W24.4 T1mm

The tungsten carbide chemical fiber cutter blades provided by Nanjing Costar Precision Tools Co., Ltd. are produced from high-quality tungsten steel raw materials, with high cutting accuracy, stable quality and long service life. It can be used to cut polyester cotton, polyester staple fiber, polypropylene staple fiber, staple fiber, polypropylene chemical fiber, etc.. The blades can be applied to large scale machines made by Lumus, Barmag, Fleissner, Neumag or Zimmer etc.

L74.5W15.5T0.884mm; L95W19T0.884mm; L117.5W15.6T0.884mm; L120W15.8T0.884mm; L135.5W19.05T0.884mm; L140W19T0.9mm; L163W22.4T0.23mm; L170W19T0.884mm; L193W19T0.9mm; L213W24.4T1mm

The tungsten steel circular slitter knife provided by Nanjing Costar Precision Tools Co., Ltd. is produced from high-quality tungsten carbide raw materials, with high cutting accuracy, stable quality and long service life. It can be widely used in rubber, filters, corrugated paper, textile, film and other industries. 100*15*0.35mm, 60*19*0.3mm etc.

ECOCAM cutter knife blades provided by Nanjing Costar Precision Tools Co., Ltd. is produced by high-quality tungsten steel raw materials, with high cutting precision, stable quality and long service life. The blades can be widely used in corrugated materials, folding cartons and paper, hard boards, flexible materials, foam and foam core boards, aluminum and ACM, wood and wood-based materials, rubber, flexographic plates, etc.
E12, E18, E25, E28, E30, E50, E70, E85, E87, E92 etc.

The hard Tungsten carbide film slitting blade provided by Nanjing Costar Precision Tools Co., Ltd. is made of high-quality tungsten steel raw materials, with high cutting accuracy, stable quality and long service life. The blades are widely used in LLDPE, PP, PA, PVC, HDPE, BOPET, PET, BOPP, metal or stretch film, etc. 43*22*0.1/0.15/0.2/0.3mm; 57*19*0.4mm

Structural Feature

Main corrugated roller: 360mm according to the flute shape different pressure roller 415mm preheat roller  400mm.

Adopt negative pressure design, use less heat,make the core paper can be pressed evenly and attached to the surface of the corrugated roller, make the corrugator shape better.Because the pressure is evenly,the top of the corrugator can be glued more evenly,make the single corrugated paper bond better.

Corrugated roller use 48Crmo alloy steel, though heat treatment, surface through grinding make tungsten carbide treatment.

Corrugated roller and pressure roller use high stability gasbag control system, also have air pressure control buffering function.

Glue quantity control use electric adjust, glue isolation device electric, glue system can operate independently when main machine stop, to avoid glue use up.Glue tank is made of stainless steel.

Movable type glue system, wash easily, maintenance and repair is more easy.

Simple control system and touch screen system, with colorful pictures show the operate sate function choice faliure indication exclude and parameter setting all can act out the machine multi function, easy operation and humanization.

Preset device inside with spray system, adjust the core papers temperature and moisture.

Main,vice corrugated roller and pressure roller bearing all use high temperature grease, to make sure the bearing working life longer and running smoothly.

Hafnium carbide (HfC) is a gray metallic powder with a NaCl-type cubic crystal structure. It has the highest melting point among known single compounds. Hafnium carbide has high elasticity index, good electrical and thermal conductivity, very small thermal expansion coefficient and good impact resistance performance, widely used in hard alloy, aerospace, atomic energy, electronics, and high material technical field, such as hard thin film coatings. It is the most important basic materials of making a missile, rocket nozzle throat lining and satellite, spacecraft hood parts for thermal protection.

TUNGSTEN CARBIDE ZUND BLADE CUTTING KNIFE FOR DIGITAL CUTTER
Zund Cutter Blade
When get a new inquiry, always hear new clients complain about the following question:
- WHY BLADES ARE SO DULL?
- WHY BLADES ARE SO EXPENSIVE?
- WHY PACKAGINGS LOOKS WITHOUT ANY INNOVATION?
If you have above question about CARBIDE ALLOY BLADE, please contact FRONTIER to solve these issues:
- We could custom packagings with your logo, SKU, BARCODE...ect.

TUNGSTEN CARBIDE ROTARY CUTTER BLADE Z44 Z46
Advantages for our Carbide Alloy Blade
- Use high quality materials according to the purpose of use
- Highly consistent with your requirements
-High precision
- wear-resistant knife edge sharp
- knife surface leveling
Tungsten Carbide Cutting Blades have been used for many years in larger knives. Our Carbide Alloy Bldae and Zund Cutter Blade Knife is very popular recently. For the more details, We have the expertise to assist you and look forward to your inquiry.