Hooked ends, Flat ends and Crimped steel fibers: Tensile strength:>1000Mpa or >850Mpa Diameter:1.0mm Length:50mm Diameter:0.75mm Length:30/35mm Diameter:0.5mm Length;30mm 20 or 25kg/bag, 1000 or 1200kg/pallet
Hooked ends, Flat ends and Crimped steel fibers: Tensile strength:>1000Mpa or >850Mpa Diameter:1.0mm Length:50mm Diameter:0.75mm Length:30/35mm Diameter:0.5mm Length;30mm 20/25kg/bag,1000/1200kg/pallet.
Steel fibers Denomination of the product : Strongly carbonaceous steel fibers and filings (resulting from the recycling of tires). Origin of the product : Strongly carbonaceous steel fibers and filings resulting from the recycling of used tires of various categories (pv, cv, gv, hgv, pwv, cev, iv, agrarian, handling, motorbikes, etc.). All the technical features of these tires comply with the regulations and standards requirements of france and of the european union. Composition of the product : The steel is a strongly carbonaceous steel. The small rubber buffings mixed with the steel fibers and filings are made of a mix-in variable proportions of 2 main types of synthetic rubber and of natural rubber. The 2 types of synthetic rubber are : - the sbr (styrene butadiene rubber) - the nbr (nitrile butadiene rubber) [cf. The specifications sheets of the products : 'rubber crumbs' and 'fine rubber powder']. The textile filling and fluff mixed with the steel fibers and filings is made of a mixture of 4 types of fibers : aramide, nylon, polyester and rayon (mainly nylon, that is to say polyamide) [cf. The specifications sheet of the product: textile filling and fluff]. Apparent density ( without compressing) : 238 kg / m3 or 0, 238 [+ or - 5 %] (adimensional). Industrial process of manufacturing : Exclusively with a mechanical crushing of the tires at ambient temperature. The process used does not require and does not reject any kind of solid, liquid or gas additives. Mass distribution of the constituents : - steel fibers and filings : 95, 1 % + or - 2, 7 % - rubber buffings : 3, 3 % + or - 1, 4 % - textile filling and fluff : 1, 6 % + or - 1, 3 % Lengths interval of the steel fibers : [1, 00 + or - 0, 02 mm -> 100, 36 + or - 0, 02 mm]. Diameters interval of the steel fibers : [0, 26 + or - 0, 02 mm -> 4, 73 + or - 0, 02 mm]. In bulk in 40' dry hc (high cube) container
Tlsanli fiber optic chandelier is a creative and innovatory lighting product.Its design and lighting effect is vivid and unique .It is widely used in the decoration of high-class location, such as hotel, night-club, bar, etc.Now many familites trend to use it to decorate their home
The hooked end steel fiber is made of low carbon steel wire,high carbon steel wire,or stainless steel wire, with tensile strength 1100Mpa,1200Mpa,1300Mpa,1400Mpa,1500Mpa,while the copper coated micro steel fiber can reach 2500Mpa. It is widely used in the concrete for reinforcement,shock resistance,crack resistance and anti-fatigue.
Your reliable Manufacturer of steel fiber located in hometown of wire mesh. Our fibers are: Loose steel fiber Glued steel fiber Micro steel fiber Stainless steel fiber Chopped steel fiber Welcome to contact us.
Steel mesh for concrete reinforcement manufactured from cold-worked reinforcement bar. Size range: A142, A193, A252, A318, A393, A565 (A6~A12) Width 2.2M x Length 6M or as per requested. Specs: MS145 / SS561 or equivalent. Grade: B500A or equivalent. Note: Price is indicative only, please contact with us for further discussion on the final quotation.
They are mainly used in fabrics, conductive plastics, antistatic brush, conductive or shielding materials, sintered felt, High temperature products, woven or nonwoven industries.
Commodity: straight steel fiber for fiber Place of origin: liaoning, china (mainland) Brand name: harvest Model number: s-lcs/25/50st Material: stainless steel Length: 25mm Diameter: 0.5mm Aspect ratio: 50 Tensile strength: 400mpa Color: metallic-grey Standard: astm a820 Shape: straight Application: for fiber reinforced concrete & refractories materials Cross section: circular
Place of origin: liaoning, china (mainland) Brand name: harvest Model number: monofilament Material: polypropylene fiber Application: for anti crack concrete reinforcement Length: 3-20mm Color: white Ignition points: 560-570? Density: 0.91+/-0.01g/cm3 Elastic modulus: 3500mpa min Elongation at break: 10% min Tensile strength: 560mpa min Acid, alkali & salt resistance: strong Melting point: 160 - 170
Commodity: cold drawn steel fiber Place of origin: liaoning, china (mainland) Brand name: harvest Model number: w-430/20/50he Material: stainless steel Length: 20mm Diameter: 0.5mm Aspect ratio: 40 Tensile strength: 1250mpa-1450mpa Application: for tougher, longer-lasting concrete strength Standard: astm a820 Color: metallic-grey Cross section: circullar
Applications of Steel Fiber APPLICATION Steel fibers are widely used in various industries due to their ability to enhance the mechanical properties of concrete and other composite materials. Concrete Reinforcement: Steel fibers are commonly used in concrete reinforcement to improve tensile strength, flexural strength, and impact resistance. This application is prevalent in both cast-in-place and precast concrete structures.
Crimped steel fiber is a low carbon, cold-drawn steel wire fiber designed to provide temperature and shrinkage crack control, strengthen flexural reinforcement, increase shear strength and improve crack resistance of concrete. It has excellent tensile, bending and shearing strength, high tenacity, and resistance against cracking, impact and fatigue. Crimped steel fibers are low-carbon, cold-drawn steel wire fibers designed to provide temperature and shrinkage crack control, strengthen flexural reinforcement, increase shear strength, and improve crack resistance of concrete. Crimped steel fiber conforms to the standards outlined in ASTM C1116 (Standard Specification for Fiber Reinforced Concrete and Shotcrete) and ASTM A820 Type V (Standard Specification for Steel Fibers for Fiber Reinforced Concrete). These coarse steel fibers not only enhance impact resistance, shatter resistance, fatigue resistance, and abrasion resistance but also contribute to increasing the overall toughness of the concrete. The recommended dosage ranges from 25 to 100 lb/cubic yards (15 to 60 kg/m3), depending on the specific reinforcement requirements of the project. Crimped steel fiber is widely used for buildings, road surfaces, bridges, tunnels, airport road surfaces, water conservancy projects, military engineering, and all kinds of building products.
Refractory AISI 304 stainless steel fiber is a type of reinforcement material that is made from AISI 304 stainless steel, which is a commonly used stainless steel alloy. The 304 Stainless Steel Fiber has resistance to high temperatures and can withstand thermal stress. Refractory AISI 304 stainless steel fiber is a type of reinforcement material that is made from AISI 304 stainless steel, which is a commonly used stainless steel alloy. The 304 Stainless Steel Fiber has resistance to high temperatures and can withstand thermal stress. AISI 304 stainless steel is a non-magnetic and austenitic stainless steel known for its corrosion resistance and versatility. When used in fiber form, it can enhance the mechanical properties of various materials, especially in applications where high temperatures or harsh environmental conditions are present. These stainless steel fibers are often added to refractory materials such as concrete or ceramics to improve their strength, durability, and resistance to thermal expansion and contraction. The use of AISI 304 stainless steel in the fibers provides corrosion resistance, making them suitable for applications in which exposure to corrosive environments is a concern.
FIBPRO 3X 50/50 steel fibres are designed specifically for the reinforcement of concrete, mortars and other cementitious mixes. FIBPRO 3X 50/50 is a low carbon wire deformed with hooked ends to provide optimum performance within the concrete mix. FIBPRO 3X 50/50 steel fibres are European Standard EN 14889-1:2006 compliant and have been specifically designed to meet or exceed the defined performance requirements.
FIBPRO 3X steel fibres are designed specially for the reinforcement of concrete, mortars and other cementitious mixes. FIBPRO 3X is a low carbon wire deformed with hooked ends to provide optimum performance within the concrete mix. FIBPRO 3X steel fibers are European Standard EN 14889-1:2006 compliant and have been specifically designed to meet or exceed the defined performance requirements
Micro Steel Fibre Brass Coated High Carbon-Steel fibre used in High Performance densified concrete system. They are available in different diameter & length sizes. Applications : UHPC Concrete Railway Sleepers Manhole Covers Random fibre mix produces better matrix building
When fully annealed, melt extract stainless steel fibers are more pliable and ductile. They not only allow for more user-friendly than the stiff cut fibers, but also have better flow features. It is especially characterized by thermal shock resistance, steep thermal gradients resistance and mechanical shock resistance, minimizing damage and delaying failure caused by cracking. Thanks to their optimum aspect radio, rapid fiber separation during the mixing phase are better guaranteed. Gives its outstanding performance in thermal shock resistance, melt extract fibers are ideal for refractory concrete used in steel works and factories.
Polyester Staple Fibre..
Recycled Fibres.
