New ForkliftTruck 4 Ton TCM Style Diesel/Gasoline/LPG Forklift Truck
12 Ton Dump Truck For Underground Mining, Small Dump Truck For Tunnel Construction The four-dump truck has a compact structure. Through the design of the cab (front part), suspension, frame, cargo compartment, lifting mechanism, etc., the structure is compact, the turning radius is small, and it is extremely flexible.The whole vehicle is based on the design concept of mining vehicles and is scientifically and reasonably configured.This Mining Dump Truck is usually for underground or on ground transportation of ores, with the advantages of good passability, good safety, strong power and strong carrying capacity. It ususally used with the mucking machine together. Product specification table Model: 12 Ton Engine power: 110HP Axle model: Front axle 1098 Axle model: Back axle 1098 Dimensions of carriage: 3400*2000*700 Carriage thickness: Bottom 8 side 6 Tyre model: 750-16 mining tyre Hydraulic cylinder model: 115*1200 Steering method: Hydraulic steering gear steering Exhaust gas treatment: Water treatment Driving style: Left-hand drive Cab Simple roof: Simple roof Dimensions: 5150*2000*1700 Man-machine height: 1.9M Gear mode: Gear shift Load capacity: 12 Ton
I have Either 1049 truck 3 mt capacity , daily / monthly rental available , Interested party can contact 9952916999
Production feature: 1.high-quality wear -resistant steel guarantees a long service life 2.reliable drive components ensure smooth operation 3.high loading volume thanks to high water line 4.perfect driving characteristics thanks to a low center of gravity 5.weight-optimised truck mixers for a maximum payload 6.simple and fast cleaning thanks to smooth rear wall surfaces Special spiral blade design,wear-resistant,smooth,no residue High water level to ensure load Low center of gravity,better driving characteristics High-quality mixing drive system
Production feature: 1.high-quality wear -resistant steel guarantees a long service life 2.reliable drive components ensure smooth operation 3.high loading volume thanks to high water line 4.perfect driving characteristics thanks to a low center of gravity 5.weight-optimised truck mixers for a maximum payload 6.simple and fast cleaning thanks to smooth rear wall surfaces Special spiral blade design,wear-resistant,smooth,no residue High water level to ensure load Low center of gravity,better driving characteristics High-quality mixing drive system TYPE:FYG5 Effective agitating:5 Geometric volume:7.5m Rolling rate:0-16(r/min) Angle:16 Weight:3040kg
6 Ton Dumper truck for mining, 6 ton loading capacity dumper truck The four-dump truck has a compact structure. Through the design of the cab (front part), suspension, frame, cargo compartment, lifting mechanism, etc., the structure is compact, the turning radius is small, and it is extremely flexible.The whole vehicle is based on the design concept of mining vehicles and is scientifically and reasonably configured.This Mining Dump Truck is usually for underground or on ground transportation of ores, with the advantages of good possibility, good safety, strong power and strong carrying capacity. It usually used with the mucking machine together. Product specification table Model 4TON 5 Ton 6 Ton 8 Ton 10 Ton 12 Ton 14 Ton 16 Ton Engine power 42KW 63KW 70KW 95HP 95HP 110HP 130HP 160HP Axle model Frount axle 2040 Front axle 1069 Front axle 1069 Front axle 1098 Front axle LN1098 Front axle 1098 Front axle 1098 Front axle LN153 Axle model Rear axle Isuzu Back axle 1069 Back axle 1069 Back axle 1098 Front axle LN1098 Back axle 1098 Back axle 1098 Front axle LN153 Dimensions of carriage 2400*1500*450 2800*1600*600 2850*1600*500 3000*1800*600 3200*1800*600 3400*2000*700 3500*2000*800 3900*2200*800 Carriage thickness Bottom 6 side 5 Bottom 8 side 6 Bottom 8 side 5 Bottom 8 side 6 Bottom 8 side 6 Bottom 8 side 6 Bottom 8 side 6 Bottom 12 side 8 Tyre model 700-16 mining tyre(Rear single wheel) 700-16 mining tyre(Rear two wheels) 700-16 mining tyre 750-16 mining tyre 750-16 mining tyre 750-16 mining tyre 825-16 mining tyre 900-20 mining tyre Hydraulic cylinder model 110*900 115*900 115*1000 115*1200 115*1200 115*1200 130*1300 130*1200 Steering method Hydraulic steering gear steering Hydraulic steering gear steering Hydraulic steering gear steering Hydraulic steering gear steering Hydraulic steering gear steering Hydraulic steering gear steering Hydraulic steering gear steering Hydraulic steering gear steering Exhaust gas treatment Water treatment Water treatment Water treatment Water treatment Water treatment Water treatment Water treatment Water treatment Driving style Left-hand drive Left-hand drive Left-hand drive Left-hand drive Left-hand drive Left-hand drive Left-hand drive Left-hand drive Cab Simple roof Simple roof Simple roof Simple roof Simple roof Simple roof Simple roof Simple roof Dimensions 4000*1500*1300 4300*1850*1600 4600*1630*1500 4700*1800*1650 4900*1800*1650 5150*2000*1700 5250*2000*1900 5800*2250*1990 Man-machine height 1.8m 1.8m 1.9M 1.9M 1.9M 1.9M 2.1M 2.2M Gear mode Gear shift Gear shift Gear shift Gear shift Gear shift Gear shift Gear shift Gear shift Load capacity 4 Ton 5 Ton 6 Ton 8 Ton 10 Ton 12 Ton 14 Ton 16 Ton
Size 5000x2500x2500 Condition: New Color: Free Voltage: 60V Power 5KW The products can be edit according to customer ask.
Truck Mounted Sweeper
SPECIFICATION Various Models - For Sale Only. Load Capacity up to 3,000 kg Maximum Lifting Height of 200 mm. Low service weight for Tail-lift use Low Noise High Quality Drive Motor Built-in Charger Maintenance Free Battery Battery Discharge Indicator In-Build Scale Auto Shut-Off Function after 3 Minutes Long Tiller Design Small Turning Radius Compact Design Easy Battery Replacement Low Energy Consumption TERMS & CONDITIONS GST: Included in above cost. Delivery: Free delivery throughout India. Warranty: 1 year from date of purchase against manufacturing defects. No Hidden Charges No Return Policy: We do not offer any refunds or returns on products purchased. In case there is any manufacturing defect with the product, we would repair or replace the product.
Fecal suction truck is a tank truck with a heavy duty vacuum designed to pneumatically load fecal, solids, liquids, sludge and etc. Facel suction truck is equipped with special vacuum suction pump, which is applied to suck faces, sewage, sludge and other liquid mixed with small suspended granules. The truck is with elliptical tank, tank material is carbon steel and stainless steel, the interior of the tank has four anti wave plates, this can avoid the instability caused by the sloshing of the liquid in the tube during the transport process. The upper part of the tank is designed with a safety barrier, so that the worker are protected during the walking. The rear head of tank is sealed. Pressure generated by the vacuum pump is used for sewage disposal. Fecal suction pipe can rotate with 360 degrees. Full tank pumping time:�¢â?°�¤ 5min, suction depth: �¢â?°�¥ 7m, two discharge ways: pressurized discharge and self-flowing discharge. Fecal suction truck is made up with chassis, vacuum tank, vacuum pump, oil-gas separator, water-gas separator, four way valve, locking device, pressure meter, fecal suction pipe, hanger rod, liquid level meter, hydraulic cylinders,power take-off,hand washing device and etc. The truck is used for cleaning septic tanks, sewage ditches and sewers etc. Advantage Specifications Details Display The advantage of 4X2 DongFeng 5CBM Fecal Suction Truck 1.Strong suction.2. Easy Operation and Maintenance3. Fecal suction pipe can rotate with 360 degrees4. Fecal suction truck with 4 anti-wave plate. The specification of 4X2 DongFeng 5CBM Fecal Suction Truck CHASSIS Cabin 3 passengers Overall Dimension 7210x2240x2600mm Gross Vehicle Weight 8275kg Curb Weight 5200kg Loading Weight 2880Kg Wheel Base 3800mm Approach/Departure Angle 24/10 degree Engine CY4102;four stroke, 4 cylinder in line; Euro III Engine horsepower 124HP Displacement 3,856 L(Diesel) Max Driving Speed 99km/h Fuel Tank 120L Tire 7.50-16 (6 pieces + 1 spare) TANK BODY Tank Capacity 5CBM Dimension 2100*1400mm(Length*Diameter) Material Q235 high tension steel Thickness 4mm PUMP Vacuum Suction Pump Model SK-6 Vertical Suction Range 9~10M Flow Rate 1.5m�?�³/min Rubber tube 7M Adequate Vacuum, Strong suction, Stable Working, Easy Operation and Maintenance
Full Driving 12 Wheel UN Sewage Tanker Truck With Self Dumping System 10m3 To 12m3 Sewage Vacuum truck(also called Suction vacuum truck, vacuum vehicle, Japanese sewage tank truck, Sewage disposal tank trucks, vacuum tank trucks) is used for suction, transportation and dumping soil and mud from various sewer man-hole, water wells and sediment. Vacuum Tank truck made by Power star Trucks is necessary for city sanitation department, waste processing company, big factory..., it can help to clean the sewer pipe underground, clean the sludge in the river around city, it also can help big factory to clean the greasy dirt and waste water.More specification about the vacuum tank please kindly refer to following information. Product Description 1. Vacuum Sewage Suction Truck for off road use. 2. High quality truck chassis, as well as famous chinese brand Sinotruk, JAC, Dongfeng, etc 3. Full Wheel Driving with 11R22.5 Tire or 12R22.5, special design for off road. 4. Long last wind cooling vacuum pump in Word Best Brand Italian Jurop pump. 4. 12,000liter tank capacity which can carry about 8Ton to 10ton sewage. 5. Self Tipping system with rear openning door, With rubber pipe for rust resistant. Sinotruk HOWO Sewage Suction Truck Overall Dimension 9300 x 2500 x 3500 mm Wheel Base 4300+1350mm Curb Weight 9500kg Loading Weight 10,000kg Cabin HW76 Standard Cabin, RHD, 1 Sleeper, Air Conditioner, 3 Passengers, Engine SINO Truck Diesel WD615.46, Euro II, 371HP Watering Cooling, Four Stroke, 6 Cylinder in Line, Direct Injection Gearbox HW13710, 10 forwards & 2 reverse Clutch Reinforced diaphragm clutch, diameter 430mm Steering Gear ZF 8118,power steering, hydraulic steering with power assistance Tire 11R22.5, all tubeless tires with one spare , 6 pieces with 1 spare Brakes Service brake: dual circuit compressed air brake Parking brake :(emergency brake): spring energy, compressed air operating on rear wheels, Auxiliary brake: engine exhaust valve brake Sewage Suction System Sewage Tanker Capacity 12 cubic meter Material Q235 high tension steel, 5mm Tank body and End Plate, Dumping System Middle Tipper Hydraulic Controlled Rear Door and Middle lifting. Rear Door Hydraulic controlled with sewage drain pipe Pump High Efficiency Italian Brand Jurop PN84D Vacuum Suction Pump Vacuum Pressure -0.092Mpa Sewage Pipe 5 meters Rubber Pipe Other Parts Water-gas separator, Oil-gas separator, Four way valve, Safety valve, Anti overflow valve, Anti overflow warning device sewage suction truck:https://www.wltrucks.com/product-category/vacuum-sewage-suction-truck/
Sinotruck Howo 4*2 Man Engine 10-15 Ton -5 Degree to -15 Degree Refrigerator / Freezer Vehicles For Sales A refrigerator truck� is a van or truck designed to carry perishable freight at specific temperatures. Like refrigerator cars,� refrigerated trucks� differ from simple insulated and ventilated vans (commonly used for transporting fruit), neither of which are fitted with cooling apparatus. Refrigerator trucks can be ice-cooled, equipped with any one of a variety of mechanical refrigeration systems powered by small displacement diesel engines, or utilize carbon dioxide (either as dry ice or in liquid form) as a cooling agent. Most of the long-distance refrigerated transport by truck is done in articulated trucks pulling refrigerated semi-trailers. Research is done on fuel cell auxiliary power units. � Max. driving speed(km/h) 85 Vehicle Main Dimensions Overall dimensions (L x W x H)mm 5995�?2020�?2330 Wheel base� (mm) 3360 Wheel track� (front/rear) (mm) 1160/ 1375 Approach/Departure angle(�°) 20/25 Engine Brand Sinotruk Type 4-stroke direct injection ,� 6-cylinder in-line with water cooling, turbo-charging and inter-cooling Horse Power(HP) 266-371 Emission standard Euro 2 Gearbox 10 Forwards gear & 2 reverse gear Clutch Reinforced diaphragm clutch, diameter 430mm Steering Gear ZF 8098,power steering, hydraulic steering with power assistance Fuel tank (L) 300 Tire 12R22.5 tubeless tyre Brakes Service brake: dual circuit compressed air brake Parking brake :(emergency brake): spring energy, compressed air operating on rear wheels Auxiliary brake: engine exhaust valve brake Van size Length from 4.5 to 9.4 m as customersâ?? requirements Configurations GRP/Steel/Aluminium Alloy in the surface, foam in the middle, thickness is 80-100 mm website:https://www.wltrucks.com/
Brand New Isuzu 120HP 5cbm Fuel Dispenser Truck 5t Diesel Refueller Tanker Haiti for Sale Fuel tank truck: according to the different types of transport medium, configuration and different places called, there are many different titles, such as tank car, tank truck, oil truck, oil supply car, oil puller, flow refueling car, tax control refueling car, computer tanker, diesel transporter, gasoline transporter, coal tar carrier, Lubricating oil transporters, edible oil transport vehicles, crude oil transporters, heavy oil transporters, oil tanker and so on. All the tank trucks can be designed as chemical vehicles, all kinds of heating and insulation tanks; all the tank cars can be equipped with computer tankers; wide range of tonnage selection to meet the userâ??s needs; the tank has multiple anti wave baffles. High pressure gas leakage test is used to make the tank body with high strength, stable center of gravity and safe and stable transportation of vehicles. Description: 1. Tank material: we can provide carbon steel tanks, stainless steel tanks, manganese steel tanks, aluminum tanks, steel with plastic (or rubber) tanks and plastic tanks. 2. Good welding: tank body is adopted an advanced automatic vertical welding techniques and head arc butt welding technology, as well as the whole- steel forming a composite. 3. High safety: equip with active and passive emergency protection devices, to provide full closure remote manipulation of materials handing functions. Equip separators [Baffle] to prevent surging of liquid towards bulk head 4. Function: The tank body is suit for loading light fuel oil, heavy oil, sulfuric acid, hydrochloric acid, nitric acid, caustic soda hydrogen peroxide, alcohol, benzene, cooking oil and so on. 5. Oil pump: gear pump, self-absorption (centrifuge) pump, chemical pump, heavy, oil pump, stainless steel pump are optional. 6. Tank shape: shape of tank body can be designed to square round, round ,Heat insulation device such as heating pipes, insulation. 7. Refueling machine: the refueling machine we use are tax controlled oiling machine with accurate figure of volume, sum of money ,etc. 8. Optional: reading meter for outlet and inlet,self-discharge valve at rail or side of tank body, compartment quantity according to the demand.
EU Standard Folding Hand Truck + 4" TPR Ball-Bearing Castors (2 Fixed, 2 Swivel), Overall Size: L812 X W503 X H940 mm, (Including Handle And Castor), Loading Capacity: 250kg, Color: Black. loading capacity : 250kg
1999 Volvo FL6 18 26 FT.flat bed manual gearbox Steel springs new tyres Truck in good condition 2001 Volvo FL180 14 ton tipper Manual gearbox steel spring Truck in good condition Tipper body rough 1998 Volvo FLC 16 FT flat bed manual gearbox Steel springs Truck in good condition
Make: JCB Model Available : 530-70, 530-110 The latest JCB 530-70 & 530-110 Construction Loadall is a telehandler thatâ??s designed to meet the challenges of any site head-on. Compact dimensions, unrivaled maneuverability, unparalleled build quality and all-day operator comfort all come as standard. That means you can take on the very narrowest spaces, slipperiest surfaces, and heaviest workloads. Thatâ??s just the beginning, too. As with all JCB Construction telescopic handlers, the 531-70 is purpose-built to the exact needs of operators like you. You can therefore also expect unrivaled productivity, efficiency, safety, and serviceability. New telematics and immobilizer security features including remote management New seat safety switch disables forward/reverse when an operator isnâ??t seated High power and torque at low revs
Suitable for indoor horizontal transportation and stacking, such as in warehouses, distribution centers and logistics companies, the Toyota range of powerful reach trucks offers high acceleration and exceptional drivability for optimum pallet movement. With lift heights of up to 8.5 meters and load capacities from 1.2 to 3 tons, the Toyota 8FBR series, 8FBS series and BT Reflex H series offer truck models suitable for block stacking, drive-in racking, and long load handling. Equally effective in chilled and cold store environments, our high-performance reach trucks are easily programmable and equipped with unique safety features for improved load handling and enhanced driver ergonomics.
Perfect for optimizing storage space use, the BT Vector Very Narrow Aisle (VNA) truck range offers man-down trucks for high-speed lateral pallet handling, and man-up trucks for full-pallet handling and high-level order picking in very narrow aisles. With lift heights up to 14.8 meters, load capacity of up to 1.5 tonnes, and the ability to work in very narrow aisles, down to 1460 millimeters, these versatile trucks can be used with wire or rail guidance. Each VNA forklift offers excellent performance, combined with driver safety and comfort and all trucks in the BT Vector range are able to function in chilled environments.
Suitable for stacking, double pallet handling, order picking, and horizontal transport, the BT Staxio powered stacker trucks are fit for a wide range of material handling applications. Offering load capacities up to 2 tonnes and lift heights up to 6.3 meters, our stacker trucks are fast, powerful and easy to use. The BT Staxio range has a lift truck for any operation, with pedestrian, platform, stand-in and rider-seated models available. All stacker trucks within the BT Staxio collection are designed to work effectively in chilled environments. BRAND TOYOTA We have a dedicated team which can supply you spares any time, anywhere.
Brand Available : TATA, MAHINDRA, ISUZU Type : Single Cabin & Double Cabin SINGLE CAB SPECIFICATIONS POWER 78 BHP GVW 2850 WHEELBASE 3050 ENGINE 4 CYLIND ... FUEL TANK 76 LITRES PAYLOAD 1200
