Products +3299 Fixed Carbon (MIN) 99% Ash (MAX) 0.8% Volatile (MAX) 0.2% Particle Size Min75% â?¥+32mesh
Carbon steel pipe fittings, made according to EN 10241 ( BS EN 10241 / BS 1740 ) standard. Size from 1/8 to 4 inch, surface treatment by sandblasting, black and galvanized. supply to international market for over fifteen years. This European Standard specifies requirements for threaded fittings of nominal sizes from DN 6 to DN 150 inclusive, made out of welded or seamless steel tubes, forging and rolled bars. It is applicable to those threaded steel pipe fittings that are used in the transportation and distribution of liquid or gas
Carbon steel pipe fittings, made according to ASME B16.11 ( 2000LB, 3000LB 6000LB ) standard. Size from 1/8 to 4 inch, surface treatment by sandblasting, black and galvanized. supply to international market for over fifteen years.
Granulated Activated Carbon Filter Cartridge for Residential, Commercial, Industrial Use Specification : Filtration : Nominal Rating. Micron Rating : 5um Length :10" (Most Common for Residential) , 20" (Most Common For Commercial) ID (Inner Diameter) : 28mm OD (Outer Diameter) : 65mm Material : Activated Carbon Coconut Shell Iodine 1000 and Up Standard Products Equivalent : DEWater PP Indonesian Top Brand Packaging : Wrapped with POF Plastic Material. 10" : 50pcs/Carton 20", 30", 40" : 25pcs/Carton Container 20GP / 40GP / 40HQ Ordering Code : GAC-AAXXXX AA : Inch XX : Iodine Number 800/1000
Activated Carbon Coconut Shell for Gold Mining, Water Purification and other Application Usage Specification : Mesh : 6x12, 8x30, 12x40, 30x60 Iodine Number : 600 - 1200 1 Sack = 25kg Customize Sack is available Container 20GP / 40GP / 40HQ Ordering Code : AC-XXXYYYY AC : Activated Carbon XXX : Mesh YYYY : Iodine Number 600-1200 Contact Person : Karl Steven +62 811 923 00 33 WhatsApp / WeChat Available
Carbon Block Filter Cartridge for Residential, Commercial, Industrial Use Specification : Filtration : Nominal Rating. Micron Rating : 5um Length : 9 3/4", 9 7/8", 10" (Most Common for Residential) , 20" (Most Common For Commercial), 30", 40" (Most Common For Industrial) ID (Inner Diameter) : 28mm OD (Outer Diameter) : 65mm Material : Coconut Shell Activated Carbon Iodine 1000 with FDA Compliance polymer Bonding Outer Finish : Standard Products Equivalent : DEWater PP Indonesian Top Brand Packaging : Wrapped with POF Plastic Material. 10", 20" : 25pcs/Ctn 30", 40" : 20pcs/Ctn Container 20GP / 40GP / 40HQ Ordering Code : CTO-AA AA : Inch
For pure rubber carbon black. we use raw tyre and steam it on 600-650 c temperature . This carbon test in lab after steam for better carbon black result and than we make 25 kg package for supply
For pure rubber carbon black. we use raw tyre and steam it on 600-650 c temperature . This carbon test in lab after steam for better carbon black result and than we make 25 kg package for supply
Our Coconut shell based Activated Carbon is very efficient in removing of small size organic impurities. Its commonly used for waste water treatment, drinking water purification, decoloration, and deodorization. Packing: 500g, 1kg/bag, 25kg Country of Origin: Thailand
Carbon Fiber Cloth is made of carbon fiber by woven unidirectional, plain weaving or twill weaving style. The carbon fibers we use contain high strength-to-weight and stiffness-to-weight ratios, carbon fabrics are thermally and electrically conductive and exhibit excellent fatigue resistance. When properly engineered, carbon fabric composites can achieve the strength and stiffness of metals at significant weight savings. Carbon fabrics are compatible with various resin systems including epoxy, polyester and vinyl ester resins. There are unidirectional carbon fiber fabric used as reinforcement clothing for bridge, road and building. The bidirectional carbon fiber fabric are woven with Plain ,Twill style,satin weave and other pattern. Material: 100% carbon fiber/ Features: Abrasion-Resistant, Anti-Static, Heat-Insulation, Waterprof Weight: 100-600 gsm Width: 100-1500mm Size: 100m/roll Style: plain/ twill Thickness: 0.10-0.64mm Uses: Any construction, sports industry, automobiles industry, Etc
Carbon fiber plate is carbon fiber impregnated resin curing and continuous pultrusion in the mold. It's made of high-quality carbon fiber and good epoxy resin by yarn tension uniformity, maintaining the strength of carbon fiber and product stability. Tensile strength up to 2800Mpa, elastic modulus up to 170Gpa. Material: 100% carbon fiber and resin Width: 5cm 10cm, 20cm thickness: 1-4mm Tensile strength: 2400-2800 mpa Size: 100m/roll Uses: Building, bridge and any civil work reinforcement.
Zhulin Granular Coal based activated carbon is made from coal though high temperature activation. It is black in appearance, with large pores. It is applied to solvent recovery, catalyst carriers, gas adsorption and water purification in the field of chemicals, environmental protection, power plant, electronics, petrochemical industry, farming, medicine, marine transportation.
Zhulin Coconut shell granular activated carbon, made of high quality coconut shell, is a kind of broken carbon with irregular grain, high strength, and can be regenerated after being saturated. Coconut shell activated carbon is black appearance, granular shape, with developed pores, good adsorption performance, high strength, economic durability and other advantages.
Coconut shell activated carbon, coconut shell activated carbon production of raw materials, it is a kind of broken granular carbon, irregular particles of high strength, can be regenerated after saturation, high adsorption capacity and low resistance is a prominent feature of it, the products are widely used in fixed bed and mobile bed, is widely used in central water purification for drinking water, industrial water,Gold Mining,Gold Extraction and so on.
Zhulin coal pellet activated carbon has a reasonable pore structure, developed pore structure, large surface area, light weight, strong adsorption capacity, good abrasion resistance, high adsorption properties, high mechanical strength and long working time. The advantages of for coating plant, organic solvents,volatile gas masks toxic gas purification, gas processing , industrial and domestic water purification, solvent recovery and so on. The effect is very good.
Impregnated activated carbon is selected from coal-based pellet activated carbon with high adsorption performance, impregnated with alkaline solution such as potassium hydroxide and sodium hydroxide, and then refined by 130°-180° cremation. Impregnated activated carbon is widely used to remove organic gases and vapors from air or other gas streams, such as hydrogen sulfide, sulfur dioxide. etc.
The coal based powder activated carbon is made of high quality anthracite coal as raw material; by special production process (first carbonization and activation, then grinding into powder) is refined. This product is the appearance of black powder, are not dissolved under the general solution. Odorless, has a flocculation effect and filtration effects and large surface area, adsorption ability, high purity, filter fast, quality stable.
Zhulin Honeycomb activated carbon has a relatively large area, microporous structure, high adsorption capacity, high surface activated carbon products, and is widely used in air pollution control. The honeycomb activated carbon adsorption method is adopted, that is, the exhaust gas is in contact with the porous activated carbon having a large surface.
Activated Alumina Ball desiccan for Cracked Gas Drying Detailed Product Description Size: 2-3mm Color: White Powder Na2O: 0.05 BET: 530m2/g Bulk Density: 0.7 Al2O3: 90% Fe: 0.03 SiO2: 0.03 White sphere activated alumina catalyst carrier Features A white or slightly red particle, ball-shaped or roll-shaped, activated alumina is insoluble in water and organic solvent, soluble in strong acids and alkali, odorless, tasteless and non-toxic Application: Drying of unsaturated hydrocarbons (e.g. ethylene, propylene, butadien) Cracked Gas Drying Drying of natural gas, if COS minimization is essential, or a minimum co-adsorption of hydrocarbons is required. Drying of highly polar compounds, such as methanol and ethanol Drying of liquid alcohol Static, (non-regenerative) dehydration of insulating glass units, whether air filled or gas-filled. Drying of refrigerants Activated alumina, there are many micro-paths, so the specific surface is large. It can be used as absorbent, desiccant and catalyst carrier. It is also a kind of trace water desiccant and the pole-molecular absorbent, according to the absorbed molecule polarization, the attachment force is strong for water, oxide, acetic acid, alkali ect. Activated alumina defluorinate just as the anion exchange resin, but the selectivity is much strong. The defluorinate effect of the activated alumina is good. The capacity is stable. It has high strength,low abrasion, no soften in water, no expansion, no powdery no crack. It can widely used in the deep drying of cracked gas, ethylene and propylene, hydrogen-generation, air separation, instrument air drying and fluorine treatment for H2O2, also in the absorbing pollution material, such as H2S, SO2, HF and paraffin in the waste gas, especially in the drinking water defluorinate.Molecular Formula Al2O3. N H2O (0
Powder: F.C: 80% Ash:10%-12% V.M.:5%-7% S:0.5% H2O:1.0% Size:0-3mm Pulverized Coal(PCI) Powder is a new spray metallurgy technology for recarburizer, mainly used in electric arc furnaces. This method can strengthen smelting, shorten metallurgical reaction time, change the traditional electric arc furnace steelmaking process, and improve the operating strength. The Function of PCI powder: 1. It has the characteristics of high carbon content, low sulfur and phosphorus, stable chemical composition, moderate hardness and regular particle size. 2. Improve thermal efficiency, reduce power consumption, reduce electrode consumption, and extend the life of the lining 3. Improve productivity and economic efficiency and reduce dust pollution in the workshop and labor intensity of workers. Briquette: F.C: 80% S:0.1-0.3% H2O:2.0% Max Size:25 mm*35mm*45mm F.C: 75% S:0.1-0.3% H2O:2.0% Max Size:25 mm*35mm*45mm F.C: 70% S:0.1-0.3% H2O:2.0% Max Size:25 mm*35mm*45mm Graphite Carbon Ball, is made of shattered graphite ore, by dosing, grinding, extrusion, drying and a series industrial process, then being a globular structure which has a certain intensity. It is an environmentally friendly smelting carbon-increasing product and a high-quality material for carbonation in the metallurgical industry. The Advantage of graphite briquette: 1 soft material, low sulfur, low phosphorus, no odor. 2, Graphite Carbon Ball is hemispherical, and can also be suitable according to user requirements. 3, high absorption rate, lubrication and fluidity is very good, suitable for thinner casting steel water to increase carbon, easy to melt (furnace temperature up to 1350 degrees or more), the general absorption rate is about 70%. 4, easy to use, can be invested, and not flying, in line with the requirements of the environmental protection department.
