good quantity 700 tons and good quality from jordan
Coconut Shell Activated Carbon
Coal Based Carbon - Granular
Coal Based Carbon - Powder
Wood Based Activated Carbon
Pallestised Activated Carbon
Activated carbon (also known as active carbon or activated charcoal), is an artificial carbonaceous (carbon-rich) material. It is typically made from wood, but also can be made using bamboo, coconut husk, peat, woods, coir, lignite, coal, pitch, and other dense carbon sources. There are a variety of similar substances that fall under the general classification of activated carbon such as activated coal and activated coke, but they all share the properties of vast surface area per mass, exceptional microporosity, and a composition of almost exclusively elemental carbon. The pore structure of activated carbon can be seen with an electron microscope and is primarily responsible for its usefulness. Microscopes show a surface honeycombed with holes and crenelated with ridges which join to a similar structure deeper within the carbon. Due to this structure, a pound of activated carbon, for instance, can have as much as 100 acres of surface area packed into it. These small, low-volume pores allow for increased adsorption capacity (the process of chemical surface bonding, not to be confused with absorption) and allow more reactions between the carbon and other media. Activated carbon is therefore highly valued in filtering, deodorization, medical, and chemical applications, as most contaminants easily bind to it and remain trapped in the carbon microstructure via many small distance-dependent atomic attractions (known as London dispersion forces). Because carbon is produced through a relatively inexpensive and simple series of activation processes, it is widely available for applications; however, activated carbon must be constantly changed as it becomes clogged with contaminants, water, and becomes a breeding ground for dangerous microorganisms after a certain contact time. This means activated carbon is constantly produced to meet the demands of its uses and is kept in large supply to ensure no delay exists in the replacement process. How to Make Activated Carbon The production process of activated carbon, or the activation of carbon, exists in two forms. A carbonaceous source such as wood, coal, peat, or any organic carbonaceous material is carbonized, which means the pure carbon is extracted by a heating method known as pyrolysis. Once the material is carbonized, the material needs to be oxidized or treated with oxygen either by exposure to CO2 or steam or by an acid-base chemical treatment. The sections below will briefly detail these processes.
Unidirectional carbon fiber fabric is a type of composite material that consists of carbon fibers arranged in a single direction within a matrix material, typically epoxy resin. The carbon fibers in unidirectional fabric are aligned parallel to each other, which gives the material its name, "unidirectional." Directional Strength: Unidirectional carbon fiber fabric exhibits exceptional strength in the direction of the fibers. This characteristic is particularly advantageous when a component or structure primarily experiences loads along a specific axis. Lightweight: Carbon fibers are renowned for their low density, contributing to the lightweight nature of unidirectional fabric. This attribute is crucial in applications where weight reduction is critical. High Stiffness: Carbon fibers have a high modulus of elasticity, resulting in a stiff material. This stiffness minimizes deflection under load, which is important in applications where structural rigidity is paramount. Tailorability: Unidirectional carbon fiber fabric can be customized to meet specific requirements. Engineers can adjust the fiber orientation, the type of matrix material (commonly epoxy resin), and the number of plies to tailor the mechanical properties for different applications. Corrosion Resistance: Carbon fibers are inherently corrosion-resistant, making unidirectional fabric suitable for use in harsh environments, where protection against environmental factors is essential. Fatigue Resistance: These materials are highly resistant to fatigue, ensuring a long service life even under cyclic loading conditions. Thermal Conductivity: Carbon fibers have relatively low thermal conductivity, which can be advantageous in applications where thermal insulation or minimal heat transfer is required. Balanced Anisotropy: Unidirectional fabric offers anisotropic properties, meaning its mechanical characteristics vary with orientation. Engineers can harness this anisotropy by combining multiple layers or orientations of fabric to achieve balanced mechanical properties in different directions. High Cost: Unidirectional carbon fiber fabric can be expensive due to the cost of carbon fibers and the manufacturing process. However, the high performance and durability of the material can often justify the cost in applications where its unique properties are essential. Structural Strengthening: Unidirectional carbon fiber composites can be used to reinforce and strengthen existing building structures, such as bridges, beams, columns, and slabs. This technique can help extend the service life of older buildings or structures that require additional load-bearing capacity. Seismic Retrofitting: In regions prone to seismic activity, unidirectional carbon fiber composites can be applied to enhance the seismic resistance of buildings by improving their structural integrity. This retrofitting helps reduce the risk of damage during earthquakes.
We are manufacturer of recovered carbon black. Our carbon is used in below industries: Rubber Industry Plastic Industry Paint Industry Tyre industry
Coal-based Activated Carbon with Powder Powdered activated carbon (PAC) is a fine black powder that is produced by heating carbon-rich materials, such as coal, wood, or coconut shells, in the absence of air to create activated carbon. PAC is widely used in various applications, including water treatment, air purification, gas processing, and industrial processes. Powdered Activated Carbon Powdered activated carbon (PAC) is a fine black powder that is produced by heating carbon-rich materials, such as coal, wood, or coconut shells, in the absence of air to create activated carbon. PAC is widely used in various applications, including water treatment, air purification, gas processing, and industrial processes. In water treatment, PAC is added to the water to remove organic contaminants, such as pesticides, solvents, and pharmaceuticals, as well as taste and odor-causing compounds. The PAC particles attract and adsorb these contaminants, effectively removing them from the water. PAC is also used in wastewater treatment to remove dissolved organic compounds and color from the wastewater.
The complete recycling of waste tires will greatly increase the added value and application range of the product. it can be used to produce rubber products such as heavy-duty truck tires and high- performance conveyor belts; shock absorbers for high-end equipment such as automobiles, engines, high-speed rail bridges, and lightweight interior materials for automobiles. Pyrolysis carbon black ELD 660 can replace 20-40% carbon black.
Charcoal pellet is made from quality rice husks charcoal and blocked with diameter according to request and needs, and dried using an oven until completely dry.It is used for Biomass fuel and industrial heating.
We mainly focus on rubber chemicals like *Accelerator MBT, MBTS, CBS, NOBS, DPG, TBBS, etc. *Antioxidant TMQ, IPPD, 6PPD, BLE, DTPD, DBD, DBD-40 *Antiscorching PVI *Phenolic resin RT11**series -- 5***series *Carbon black N330,N660,N550, etc.
Features : Multi Color & Multi Material Capability High quality printing with 7 m Lidar Resolution Upgradeable and customizable flexibility High speed CoreXY with 20000 mm/s Acceleration Dual Auto Bed Leveling What to Expect from the X1-Carbon 3D Printer 20 m/s�² acceleration Micro lidar assisted bed leveling Active vibration compensation for better print quality Spaghetti failure detection and auto-pause Print resume after power outage Advanced materials empower advanced projects. Bambu Lab X1 Carbon, equipped with extra cooling and a hardened nozzle and drive gear, unlocks a wider selection of materials, including PA, PC, PET, and TPU, and specializes in carbon fiber and glass fiber reinforced polymers. Colors & Beyond With Bambu Lab Automatic Material System (AMS)ï¼?you can now enjoy printing freely in multiple colors and materials. Vibration Compensation & Extrusion Compensation The active vibration compensation (XY) algorithm and extrusion compensation guarantees extra smoothness and gets you good prints. Dual Auto Bed Leveling Dual Auto Bed Leveling system checks for increased reliability.The lidar and analog force sensors crosscheck for an extra layer of redundancy in bed leveling. Al inspected first layer Tired of waiting out that first layer? The lidar sensor can check your first layer so that you can get back to doing...anything else.
Hulani International are manufacture and supplier, high quality Activated Carbons to industry and water treatment plants in granular, powdered, and extruded forms, made from diverse raw materials including various grades of coal, and wood. All our activated carbon products are derived from high quality raw material thereby assuring greater purity and superior performance through higher surface area & more pore volume per gram. We would also appreciate your help in making contact and getting acquainted with those businesses. Registration/affiliation: Hulani International has obtained the following certificates from the Government of India: Goods and Service Tax, Import Export Code, Federation of Indian Export Organisation. GSTIN - 24AAPFH9810E1ZC IEC - AAPFH9810E FIEO - RCMC/FIEO/03399/2023-24 Target customers: Importers, Wholesalers, Traders, Supplier of Ceramics product, Plastic product like a LLDPE powder (HSN Code:39011010) and many more. We look forward to your cooperation. If our specifications match each other, we can develop a good business together. If you send me the list of buyers of my product, I will be very grateful. Thank you very much, Respectfully, Rohankumar Hulani
Cathode carbon blocks which is made of high-quality anthracite, coke, graphite and other raw materials. Alternative of Carbon Anode Blocks. Applications: Alternative of foundy coke, carbon anode butts, etc. Used in iron melting cupola furnace as fuel and fluorite substitute As fuel in cement plants, steel plants, cast iron plants, foundries and thermal power plants Waste incineration plants and some as boiler fuel
Classification: Chemical Auxiliary Agent CAS No.: 7440-44-0 Other Names: Activated Carbon Purity: 99% Place of Origin: India Type: Adsorbent Adsorbent Variety: Activated Carbon Usage: Coating Auxiliary Agents, Electronics Chemicals, Leather Auxiliary Agents, Paper Chemicals, Petroleum Additives, Plastic Auxiliary Agents, Rubber Auxiliary Agents, Surfactants, Textile Auxiliary Agents, Water Treatment Chemicals Product name: Coconut Shell Based Activated Carbon Appearance: Black granular Specifications: 6x12 mesh, 8x16 mesh Application: Gold Purification Material: Coconut Shell Iodine Value: Above 1000 Adsorbent: Activated carbon
Product Description calcined anthracite coal is used as auxiliary additives in the iron and steel smelting industry. Huarong carbon raiser are mainly based on the high quality of Ningxia "Taixi anthracite coal" with unique low ash, low sulfur, low phosphorus, high fixed carbon, high calorific value, which is calcined under 1200 degree high temperature. have following features: strong oxidation resistance, high mechanical strength and high chemical activit
Product Characteristics Acid proof and corrosion-resistance Made up of Using high-grade carbon-containing materials and adding acid proof organic compound, it, with low porosity and high bulk density, is so hard to be corroded by acid or alkaline solution. Proof high temperature, long lifetime The proved temperature is 350�ºC to the top. Due to its better abrasion resistance compared with traditional rubber products and higher temperature as a result of bond and additive, the product has much longer lifetime. DATA: Specifications Typical Properties Ash content % 2 Acid resistance % 98 Apparent porosity % 11 Volume density % 1.62 Compressive strength MPa 65 Cold bending strength MPa 20
pre-baked consumable Carbon Anode made from petroleum coke, and coal tar pitch,through mixing,forming and baking processes,be used as anodes in cells of Primary Aluminum Smelter. Pre-baked Carbon Anodes Produced by Carbon has the property of lower Ash content Lower Sulfur content,and Higher Compress strength. CO2 Reactivity Residue can reach above 91%, and Air Reactivity can reach above 96%; the life-span in cells of aluminum electrolysis is 30-33days, with Jiningâ??s anodes the carbon consumption required for producing one-ton primary aluminum will reduce by about 30Kg than using Pre-baked Carbon Anodes produced by other suppliers. Higher thermal shock Resistance;Thermal Exposure:
