Multilayer ceramic capacitors Wide capacitance, temperature , voltage and tolerance range; industry sizes; tape and reel available for auto placement; a lot of leads type available.
Ceramic capacitors The choice of dielectric is largely determined by the temperature stability required: Npo (cog) ultra stable classdielectric, with negligible dependence of electrical properties on temperature, voltage, frequency and time, used in circuits requiring stable performance. X7r stable class =dielectric, with predictable change of properties with temperature, voltage, frequency and time. Used 5 uas blocking, coupling, by-passing and frequency discriminating elements. This dielectric is ferroelectric and offers higher capacitance ranges than class. Y5v(z5u) general purpose class =dielectric with highest dielectric constant and greater variation of properties with temperature and test conditions. Very high capacitance per unit volume and suited for application as well as filtering,
Rvs-chip type, standard, 85 f, 2000 hours Rvk-chip type, low-leakage, 105f, 2000hours Rvw-chip type, wide temperature, 105f, 2000hours Rvt-chip type, wide temperature, 105f, 1000hours Rve-chip type, lower impedance, 105f, 1000hours Rvh-chip type, wide temperature, 125f, 1000hours Rvn-chip type, bipolar, 105f, 2000hours.
Dipped tantalum capacitors Small units with high stable performance, lower current leakage and dissipation factor, stable frequency and temperature and long life. Suitable for military equipment and computer f=telephone and other electronic products. Meets iec384-15-3 and gb7215-87 standard.
1) Small in dimension, light in weight, low dissipation factor 2) Good self-healing ability, long lifespan. 3) High insulation resistance, safety and stable. 4) It adopts safe anti-explosion net as its dielectric layer. It is widely applied to fluorescent lamps and halogen lamps; also it is ideally energy-saving. 1) Temperature Resistance: -40oC ~ +85oC 2) Rated Voltage: 250VAC-630VAC (50/60Hz) 3) Capacitance Range: 4uF~ 60uF 4) Capacitance Tolerance: í+5% ~ í+10% 5) Dissipation Factor: í_0.002 6) Testing voltage: between leading-out 1.75UR, 10S no breakdown Between leading-out end and shell: 2,200V AC, 10S no breakdown Insulation resistance: T-Tí¦3,000Mn.UF T-C í¦1,000Mn Specifications: can be supplied according to customers needs.
Elecsoud offer many kinds for film capacitors. We offer polyester film capacitors and popypropylene film capacitor. Radial and axial type. Below is our series. And we can offer speedy deliver with competitive prices: Cl11 polyester film capacitor Cl20 metallized polyester film capacitor-axial Cl21 metallized polyester film capacitor Cl21x miniaturized metallized polyester film capacitor Cl62 metallized polyester film capacitor for ac use Cbb13 polypropylene film capacitor Cbb20 axial-type metallized popypropylene film capacitor Cbb21 metallized polypropylene film capacitor Cbb62 metallized polypropylene film capacitor for ac use Cbb81 high-voltage metallized polypropylene film capacitor Metallized polyproplene film capacitor x2
Elecsound offer aluminum electrolytic capacitor with good price. We can offer radial, axial and smd type, low esr, bi-polar, non-polar. Standard size and mini size. Pls check below info: Cd110x 11mm height standard -40~+85c aluminum electrolytic capacitor Cd268 high tempratur -40~+105c aluminum electrolytic capacitor Cd11w 5mm height standard -40~+85c aluminum electrolytic capacitor Cd11x 7mm height standard -40~+85c aluminum electrolytic capacitor Smd type standard -40~+85c aluminum electrolytic capacitor Smd high temprature -40~+105c aluminum electrolytic capacitor Cd71 bi-polar capacitors aluminum electrolytic capacitor Cd293 serie capacitors aluminum electrolytic capacitor Axial type aluminum electrolytic capacitor
Elecsound can offer almost all kinds of chip aluminum electrolytic capacitor . Our products are very high quality as japan brand but much low prices than japan brand. If you need pls check below info: Ss standard 85c smd aluminum electrolytic capacitor Sc low leakage current smd aluminum electrolytic capacitor Ht wide temperature 105c smd aluminum electrolytic capacitor Np non-polarized smd aluminum electrolytic capacitor Kp non-polarized with wide temperature smd aluminum electrolytic capacitor Lz low impedance smd aluminum electrolytic capacitor Kz extra lower impedance smd aluminum electrolytic capacitor Fz long life extra impedance smd aluminum electrolytic capacitor El long life assurance smd aluminum electrolytic capacitor Kl 5000 hours load life smd aluminum electrolytic capacitor Kh high reliability smd aluminum electrolytic capacitor
Specifications Operating temp range -40íµ~+105íµ Capacitance range 0.0022ª¦F~10ª¦F Rated voltage 275VAC Capacitance tolerance í+5%(J)íóí+10%(K)íóí+20%(M) Dissipation factor í_10í-10-4(23íµ f=1KHz) Withstand voltage 4.3UN(10S) Insulation resistance Cí_0.33ª¦F Rsí¦15000Mª+ C>0.33ª¦F Cí-Rsí¦5000S (23íµ 1min).
Structures Material: Polypropylene film Electrode: Metallized Vacuum Evaporated Layer Encapsulation: Wrap up with PET tape and Encapsulated with Fire-proof Epoxide Resin(UL94V-0) Shape: Cylinder or Elliptic Pin: With copper-clad steel leads or PVC Electronic Tread Using area In heavy current such as filtering and impulse, E.G. Power amplifiers and soldering machines etc Could be used in all the CBB21 compliant conditions.
1, Operating Temp.Range, -20íµí½-+85íµ, í¬í¬,, 2, Capacitance, Within the specified Tolerance, Measured at 25íµ with 1í+ 0.1kHz and 1V (rms), 3, Temperature Characteristics, D, N4700, Compared with the, value measured at 25íµ,, the capacitance change from -25íµ to 85íµ should not exceed the limit specified., 4, Dissipation Factor, í_0.3úÑ, The same as No.2, 5, withstand voltage, No failure, Applied 1.5 times of rated voltage for 60 second., 6, Insulation Resistance(I.R.), >104MW, Measured with DC 1kV within 60í+5sec., 7, Life, Appearance, No marked defect,, Capacitance change, whthiní+20úÑ,, D.R., í_5úÑ,, I.R., 1000 Mª+min., Apply a DC voltage of 125% of the rated voltage for 100+24/-0 hrs. in silicon oil at 85í+2íµ. Post treatment: Capacitor should be stored for 24 hrs. at room condition.(Charge/Discharge currentí_50mA), 8, Humidity, (under Steady State), Appearance, No marked defect,, capacitance change, withiní+20úÑ,, D.R., í_5úÑ,, I.R., 1000 Mª+min. Set the capacitor for 100-0+24 hrs at 40í+2íµ in 90 to 95% relative humidity. Post-treatment: Capacitor should be stored for 24 hrs.at room condition.
Voltate Rating: 300vac, 280vac, 275vac, 250VAC Capacitance Range: 0.0022~1uF Operating Temperature: -40íµ~ +100íµ Pitch Size: 10mm, 15mm, 22.5mm, 27.5mm
2000h at 85C, 1000h at 105C Capacitance Range: 0.1uF~470uF Voltage Range: 4V~100VDC Size: 4x5.4mm, 5x5.4mm, 6.3x5.4mm, 6.3x7.7mm, 8x6.2mm 4x5.4mm, 5x5.4mm, 6.3x5.4mm, 6.3x7.7mm, 8x6.2mm
High Q, high power, low esr/esl, low noise, high self-resonance, ultra-stable performance. Dimensions: 0505 1111, 2325 0805 38380.5g/pc, 500, 1000, 5000pcs/reel.
P/N:KMH180VSSN390 390UF 180V Nippon Chemi-Con 25.4 x25 8,183 pieces
Dielectric:Polypropylene film Gas-impregnated/dry type Wave cut Extruded round aluminum can with threaded Passed UL CE certification Features: Three or single phase,delta connected,with discharge resistor,self-healing technology,overpressure disconnector, naturally air cooled(or forced air cooling) Indoor mounting Voltage:400-415v 440v 525v Capability:1kvar~50kvar
Tantalum Capacitors: CA42 Dipped Tantalum Capacitors CA45 SMD Tantalum Capacitors Aluminum Electrolytic Capacitors: CD110X electrolytic capacitors CD268 electrolytic capacitors CD11W electrolytic capacitors CD11X electrolytic capacitors SMD electrolytic capacitors SMD high temprature electrolytic capacitors CD71 Bi-polar electrolytic capacitors CD293 SERIE electrolytic capacitors.
Integrate circuit capacitor
Standard:GB6346 (IEC 60384-11) Climatic Category:55/085/21 Operating Temperature:ú¡40oCí¡ú½85oC Rated Voltage:100V (2A)íó250V (2E) Capacitance Range:0.0010UFí¡0.47UF Capacitance Tolerance:í+5% (J), í+10% (K), í+20% (M) Withstand Voltoge:2.0UR(60s) Dissipation Factor:í-1.0% (20oC, 1KHz)
Introduction 1.Low D.F. 2. High stability against frequency and temperature variation. 3. Suitable for high frequency and/or pulse application. 4. Negative temperature coefficient. 5. Non-inductive construction. 6.Low equivalent series resistance. Specification: 1.Operating temperature : -40óxc ~ + 85óxc 2.Capacitance range : 0.001~0.68uf 3.Capacitance tolerance : í=1%(f), í=2%(g), í=5%(j), í=10%(k) 4.Rated voltage : 50/100vdc. 250vdc. 400vdc. 630vdc. 5.Dissipation factor :0.08%max at 1khz, 25óxc
