Dipped tantalum capacitors
Small units with high stable performance, lower current leakage and dissipation factor, stable frequency and temperature and long life. Suitable for military equipment and computer f=telephone and other electronic products.
Meets iec384-15-3 and gb7215-87 standard.
Suitable for military equipment and computer, telephone and other electronic products. Features: 1) Small units with high stable performance 2) Lower current leakage and dissipation factor 3) Stable frequency and temperature and long life 4) Meet IEC384-15-3 and GB7215-87 standard 5) Operating temperature: -55 - 125fpC 6) Capacitance tolerance: f+20%, f+10%, f+5% (special order) 7) Capacitance range: 0.1 - 330»F 8) Voltage range: 4 - 50V
Ca42 dipped tantalum capacitors Meets iec384-15-3 and gb7215-87 standard General characteristics Operating temperature: -55 ~125c Capacitance tolerance: 20% , 10%, 5%(special order) Capacitance range: 01uf-330uf Dc leakage current20c) i0 002crur or 1ua (whichever is greater) Dissipation factor(20c)see table 1 Temperature performance: see table 1 Climatic category: 55/125/10 Life test: 1000 hours Pf
JTA - Dipped Tantalum Capacitors Specifications Operating Temperature -55C to +125C JYA-Y1-and-Y2-AC-Safety-Standard-Recognized-Capacitors Capacitance Range 0.4F ~ 680F Capacitance Tolerance ±20%, ±10%,5% (for special order) Rated Voltage 6.3V - 50V.DC
1.Scope: This specification applies to ca42 dipped tantalum capacitors produced by our factory for use in electronic equipments. 2.Standard: Detail specification for electronic components type ca42 fixed tantalum capacitors with solid electrolyte assessment level e gb7215-87. 3.Standand testing conditions: Tests should be done at temperature 15-35?, humidity of 45-75%rh, and pressure of 860-1060mbar .But in the case of a discrepancy , the final decision should be made by the testing at temp of 25?, humidity of 60-70%rh , and pressure of 860-1060mbar.
Ca42 series solid dipped tantalum capacitors are sinter-anode, epoxy-coated and are encapsulated with flame-retardant yellow epoxy powder. These series products are good to use for high stable performance, low current leakage and low dissipation factor, also for stable frequency, stable temperature and long life. The products are widely used in home electronic appliances, computer, telecommunication, military equipments and other electronic products. They meet and exceed the requirements of iec specification 384-15-3 and gb7215-87 standard.
Capacitor TS15 Ceramic Disc Capacitor TS16 High Voltage Ceramic Capacitor TS16L Low D.F., High Voltage Ceramic Capacitor (A And B Series) TS16M Mini Type High Voltage Ceramic Capacitor TS17 Multilayer (mono) Axial & Radial TS18 Chip Multilayer Ceramic Capacitor TS18H High Voltage Multilayer Ceramic Capacitors - SMD
Capacitors Solid tantalum chip capacitors designed and manufactured with the demanding requirements of surface mount technology.There are a, b, c, d, e, s six case codes. They have lower esr compared with the dipped tantalum capacitors. The product compatible with automatic pick and place equipment. Suitable for military equipment and computer, telephone and other electronic products. Meets the requirements of eia 535baac and qc300801, q / yhc. 45-01 standard. General characteristics 1. Operating temperature: -55c ~ 125c (above 85c, use dreaded voltage) . 2. Capacitance tolerance: / -20% , / -10% . 3. Capacitance range: 0. 1uf~330uf. 4. Voltage rating: 4v~50v. 5. Reliability: 2% per 1000h at 85c with 0. 1 series impedance 60% confidence level.
Chip tantalum capacitors Solid tantalum chip capacitors are designed and manufactured with the demanding requirements of surface mount technology in mind. There are a, b, c, d, e, s six case codes. They have lower esr comparing with the dipped tantalum capacitors. The product is compatible with automatic pick and place equipment. Suitable for military equipment and computer fceil telephone and other electronic products.
Ca45 series solid smd tantalum capacitors are sinter-anode and molded with small sizes while high capacitance, reliability and excellent operation performances. The series capacitor is designed and manufactured to meet the growing demand for surface mount technology. There are p, a, b, c, d, e six case codes available for choice. Comparing with dipped tantalum capacitor, they have lower esr. The products are widely used in telecommunications, computer, military equipments and other electronic products. They meet the requirements of eia 535baac. Tape & reel
