Toronto Lemongrass Oil Suppliers and Manufacturers

Light Cycle Oil (LCO) is a diesel boiling range product from� fluid catalytic cracking� units. flexible process to process LCO into desired products such as very-low sulphur diesel and high- octane high-aromatics naphtha. It is a light lubricating oil that is suitable for use on bicycles and similar equipment. It is a diesel boiling range product� from fluid catalytic cracking units. Light cycle oil is a poor diesel fuel blending component. LCO are produced at the bottom of the fluidized catalytic cracking (FCC) process in a refinery and are enriched with� 50-80 wt% heterocyclic aromatic compounds, 3 wt% S, and 600 ppm N.

Crude oil is a naturally occurring, unrefined petroleum product that is made up of a mixture of hydrocarbons and other organic compounds. It is the raw material that is used to produce a variety of refined petroleum products, including gasoline, diesel fuel, and heating oil. Crude oil is extracted from the earth through drilling and is transported to refineries where it is processed and refined into various products. Crude oil has a wide range of physical properties. Crude oil is made up of 84.5% carbon, 13% hydrogen, 1â??3% sulfur, and less than 1% each of nitrogen, oxygen, metals, and salts. REBCO is a specific type of crude oil that is produced in Russia and the surrounding regions. It is a high-quality crude oil that is known for its low sulfur content and low viscosity. The middle east light crude oil is also high-quality crude oil. The GOST 51 858-2002 specification refers to the Russian standard for REBCO, which outlines the crude oils characteristics and performance requirements. Gost 51 858 2002 offers from exporters, manufacturers, suppliers, wholesalers and distributors globally by price, and quality of the oil. REBCO is an important commodity in the global energy market, and it is carefully regulated to ensure that it meets the necessary standards for safety and performance. Maximum Sulfur Content 1,8% Paraffin Content 6,0%, Maximum Water & Sediment Content 1,2%, Distillation, Weight 21% Up to 200 N min 21, Up to 300 N min 41, Up to 350 N min 50 and Maximum salts content, MG/L 100.

Description: Automotive Gas Oil (AGO), commonly referred to as diesel fuel, is a vital component in the automotive industry, powering a wide range of vehicles, from cars and trucks to buses and heavy-duty machinery. Renowned for its efficiency, reliability, and versatility, AGO is the fuel of choice for millions of drivers worldwide. Key Features: High Energy Density: AGO boasts a high energy density, providing exceptional fuel efficiency and optimal engine performance, whether cruising on the highway or hauling heavy loads. Clean Combustion: Engineered for clean combustion, AGO minimizes emissions of harmful pollutants such as sulfur oxides (SOx), nitrogen oxides (NOx), and particulate matter (PM), ensuring compliance with environmental regulations and reducing environmental impact. Cold Weather Performance: Formulated with additives to enhance cold flow properties, AGO remains fluid even in frigid temperatures, facilitating reliable engine starting and smooth operation in cold climates. Engine Compatibility: Compatible with a wide range of diesel engines, including modern high-pressure common rail (HPCR) systems, AGO delivers consistent performance and reliability across various vehicle types and models. Long-Term Stability: Engineered for long-term stability and storage, AGO maintains its integrity and performance characteristics over time, minimizing fuel degradation and ensuring reliable operation even during prolonged storage periods. Target Audience: Private Vehicle Owners: Ideal for owners of diesel-powered cars, SUVs, and pickup trucks, AGO provides reliable fueling solutions for daily commuting, road trips, and recreational activities. Commercial Fleets: Trusted by businesses operating delivery vans, trucks, and buses, AGO offers cost-effective fueling options for fleet management, logistics, and transportation services. Construction and Agriculture: Essential for heavy equipment and machinery used in construction, agriculture, and mining, AGO powers tractors, excavators, and other diesel-powered vehicles with exceptional performance and reliability. Experience the Power and Efficiency of Automotive Gas Oil (AGO) for Your Driving Needs!

Description: D6 Virgin Fuel Oil is a premium-grade fuel renowned for its exceptional purity and performance. Produced through a stringent refining process, D6 Virgin Fuel Oil meets the highest industry standards and is widely recognized for its reliability and versatility across various applications. Key Features: Virgin Quality: D6 Virgin Fuel Oil is derived from virgin crude oil feedstock, ensuring superior quality and consistency in every batch. Low Sulfur Content: With a low sulfur content, D6 Virgin Fuel Oil complies with environmental regulations, reducing emissions and minimizing environmental impact. High Energy Density: Boasting a high energy density, D6 Virgin Fuel Oil delivers optimal fuel efficiency and maximum power output, making it an ideal choice for demanding industrial and commercial operations. Excellent Stability: Engineered for long-term stability and performance, D6 Virgin Fuel Oil maintains its integrity even under extreme conditions, providing reliable fueling solutions for critical applications. Wide Range of Applications: From power generation and industrial heating to marine propulsion and aviation, D6 Virgin Fuel Oil offers versatile fueling options for diverse industries and applications. Benefits: Reliability: Backed by stringent quality control measures and rigorous testing, D6 Virgin Fuel Oil offers unmatched reliability and consistency, ensuring uninterrupted operation and minimal downtime. Environmental Compliance: With its low sulfur content and adherence to regulatory standards, D6 Virgin Fuel Oil helps organizations meet environmental compliance requirements and reduce their carbon footprint. Cost Efficiency: By maximizing fuel efficiency and minimizing waste, D6 Virgin Fuel Oil helps organizations optimize their operational costs and enhance overall profitability. Versatility: Suitable for a wide range of industrial and commercial applications, D6 Virgin Fuel Oil provides flexible fueling solutions tailored to the unique needs of each customer. Target Audience: Power Generation Industry: Ideal for power plants and utilities, D6 Virgin Fuel Oil offers reliable and cost-effective fueling options for electricity generation and grid stability. Industrial Sector: From manufacturing facilities to industrial boilers, D6 Virgin Fuel Oil provides efficient and sustainable fueling solutions for various industrial processes and heating applications. Marine and Aviation: Trusted by shipping companies, cruise liners, and airlines, D6 Virgin Fuel Oil powers marine vessels and aircraft with exceptional performance and reliability. Experience the Power of Pure Performance with D6 Virgin Fuel Oil!

Premium quality Basmati rice in 10 lbs bags. Liquidation sale stock available in Toronto pickup or free delivery.

Premium quality jasmine rice in 8kg bags. Liquidation sale stock available in Toronto pickup or free delivery.

Product: Canadian Iron Millscale Minimum Fe content is 70%,

D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world, it has other names. Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2% water and one- half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400.

Fuel Oil is a fraction obtained from petroleum distillation, either as a distillate or a residue. Broadly speaking, oil is any liquid petroleum product, which is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, except oils having a flash point of approximately 40 C (104 F). Oil is made of long hydrocarbon chains, particularly alkanes, cycloalkanes and aromatics. The term Fuel Oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil, heavier than gasoline and naphtha. Fuel oils are used as fuel for power generation, marine bunkers and large industrial heating plants. Fuel oil 180 CST, also known as Bunker Fuel or Residual Fuel Oil, is characterized by its viscosity, which is measured in centistokes (CST).� The number 180 indicates the maximum viscosity of the oil at 50 degrees Celsius. This specification makes it a relatively thick and viscous fuel, compared to lighter fuel oils. Both CST 180 and CST 380 fuel oils are considered heavy fuel oils and are commonly used in the shipping industry. They are often referred to as bunker fuels and are used in vessels like cargo ships, container ships, and oil tankers.

Automotive Gas Oil (AGO) is also known as diesel because it is� a by-product of crude oil. It is gotten in the mid-boiling range of the crude oil refining process. AGO is a less flammable fuel compared to other petroleum products such as premium motor spirit. AGO is used in two main types of vehicles namely heavy-duty vehicles, such as trucks and buses and light-duty vehicles, such as vans and passenger cars. Both oil and natural gas are made up primarily of hydrocarbon (H), which is a chemical compound consisting entirely of carbon (C) and hydrogen (H). They can be classified further into a variety of types depending on the structure of molecules and how they are bound.

EN590 Diesel-10PPM Ultra Low Sulfur Diesel (ULSD) is a premium diesel fuel. EN 590 10 ppm is a type of diesel fuel with a sulfur content of 10 parts per million (ppm). It's a low- emission diesel fuel that's ideal for power generators, tower cranes, construction trucks, and excavators with diesel engines.  It conforms the European standard EN590, with an ultra-low sulfur content of only 10 parts per million (PPM). This type of diesel is known for its environmental benefits and is widely used in modern diesel engines.

Ultra-low sulfur diesel (ULSD) is a cleaner-burning diesel fuel that contains a maximum of 15 parts per million (ppm) of sulfur. ULSD contains 97% less sulfur than low-sulfur diesel (LSD), which typically contains 500 ppm of sulfur. The European Union began mandating the reduction of diesel sulfur content in 1993, and the United States started phasing in ULSD requirements for highway vehicles in 2006. It was developed to allow for the use of improved pollution control devices that reduce diesel emissions. ULSD can significantly reduce emissions when used in combination with cleaner-burning diesel engines and vehicles. It may react with strong acids or strong oxidizing agents, such as chlorates, nitrates, and peroxides. You should avoid contact with heat, sparks, fire, and oxidizing agents. The appearance of ULSD should be clear and bright, free from visible sediment and water.

Description: Aviation Turbine Fuel (Jet A1) is the premier choice for powering commercial and military aircraft around the globe. Engineered to exacting standards and rigorously tested for quality and performance, Jet A1 is a highly refined kerosene-based fuel that meets the stringent requirements of the aviation industry. Key Features: High Purity: Jet A1 is produced through a meticulous refining process to ensure exceptional purity and cleanliness, minimizing the risk of engine deposits and fuel system corrosion. Low Freezing Point: Formulated with additives to lower the freezing point, Jet A1 remains fluid even at high altitudes and low temperatures, ensuring reliable engine operation in diverse weather conditions. Consistent Combustion: Engineered for consistent combustion characteristics, Jet A1 delivers stable engine performance and efficient fuel consumption throughout the flight envelope. Low Sulfur Content: Compliant with international aviation standards, Jet A1 contains minimal sulfur content, reducing emissions and environmental impact during flight operations. High Energy Density: With its high energy density, Jet A1 provides superior power output and range capability, allowing aircraft to travel longer distances with optimal fuel efficiency. Benefits: Safety and Reliability: Jet A1 is manufactured to the highest safety standards, ensuring reliable engine operation and minimizing the risk of fuel-related incidents or failures. Global Compatibility: Widely accepted and used by airlines, military forces, and aviation authorities worldwide, Jet A1 offers seamless compatibility with a broad range of aircraft and engine types. Environmental Responsibility: By meeting stringent emissions regulations and utilizing advanced refining techniques, Jet A1 helps mitigate the environmental impact of aviation activities, supporting sustainable air travel. Performance Optimization: Designed to meet the demanding requirements of modern aviation, Jet A1 delivers superior performance, efficiency, and endurance, enabling airlines to maximize operational efficiency and passenger comfort. Target Audience: Commercial Airlines: Essential for scheduled and charter airlines operating passenger and cargo flights, Jet A1 provides the fueling solution of choice for safe, efficient, and reliable air travel. Military Forces: Trusted by military organizations worldwide, Jet A1 fuels a wide range of military aircraft, from tactical fighters to strategic bombers, ensuring mission readiness and operational capability. General Aviation: Suitable for use in private and corporate aircraft, Jet A1 offers high-performance fueling options for recreational flying, business travel, and aerial work operations. Experience Unrivaled Performance and Reliability with Aviation Turbine Fuel (Jet A1)!

The term bitumen refers to a substance produced through the distillation of crude oil. Bitumen is known for its waterproofing and adhesive properties and is commonly used in the construction industry, notably for roads and highways. The two Bitumen grades are 60/70 and 80/100. The difference between 60/70 and 80/100 penetration grade is the penetration range.� Bitumen 60/70 has lower penetration which means it is harder than bitumen 80/100. Bitumen 60/70 is better suited for use in hot climates and can withstand heavy traffic loads, unlike bitumen 80/100. According to the ASTM D36 method,� the softening point of bitumen 60/70 is between 49 to 56�°C, and the flash point of bitumen 60/70 is 250 �°C. Another important factor is density. Due to the ASTM D70, the density of bitumen 60/70 is equal to 1.0344. Bitumen Penetration Grade 85/100 is� a standard penetration grade. Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses.

Jet Fuel A1 and Jet Fuel A FOB Basis for Rotterdam and Houston but mostly Rotterdam. Requirements from buyer - ICPO - Company Profile - Verfiable TSA

Gasoil or D2 is the second distillate obtained from crude oil. There are varying contents of sulphur in Gasoil and D2 products that will affect when the fuel is best to use (seasons) and the cost thereof. To ensure that clients are provided with suitable D2 products, there are ISO industry standards that suppliers must adhere to. Gasoil Gas oil forms part of a family of heavy oils. It is created by means of a process of fractional distillation of petroleum. It is used as a diesel fuel in heating and automotive applications. Gas oil that is used to power off-road vehicles that are used in the industrial, commercial and agricultural communities is often called red diesel. Fuels and oils are taxed differently depending on their purpose gas oil used for tractors; mowers and tippers are dyed red in order for inspectors to tell the difference. Other gas oil is considered white diesel as it is not dyed. D2 Gas Oil This is gas oil that is the second distillate and is obtained through the processing of crude oil. Reformers and additives are not required to make use of this fuel. The version of D2 that has lower sulphur content is called GOST 305-82. It is presented to the market as a major reduction in pollution gas oil. GOST 305-82 GOST 305-82 is D2 with lower sulphur content. GOST is a variant of Gasoil and D2 that is in line with ISO industry standards with a sulphur content of 0.02% max. This is known as Ultra Low Sulphur fuel. Low sulphur fuel is that with 0.2% sulphur content.