CAS : 69102-90-5 HS Code : 3902900020 HBN boron nitride powder property Adopting international leading technology -Trimeric Amine Method, to produce boron nitride powder. Sintered under temperature as high as 2000�ºC , boron nidtride powder has characterstics of well crystallization, high purity, stable quality. PENSC boron nitride powder can be widely usedin fireproof materials, die-casting ceramics, lubricating demould, heating conducting additives, etc. Used for high-temperature solid lubricants, extrusion anti-wear additives, additives for the production of ceramic composites; Used in special electrolysis and resistance materials for high temperature conditions; Used for heat shield materials in aerospace; Used as a release agent for metal forming and a lubricant for metal wire drawing;
CAS : 1316-98-9 HS : 2942000000 Application: t-Butylferrocene has been used as a modifier of increasing burning rate in composite solid propellants. It could control not only the curing reaction rate but the burning rate when applied to the burning rate catalyst in HTPB composite solid propellants. It can improve the processing performance and mechanical properties of slurry, and has a good storage performance. 4. Safety instructions: t-Butylferrocene could be oxidized slowly when exposed to air. Polymerized under high temperature and burned if mixed with strong oxidizer. 5. Storage: Stored in a cool, ventilated place. Casks should be sealed with nitrogen. The shelf life is 12 months after manufacturer date. It is still available if retest result is qualified after expire date. 6. Transportation: Keep upright when transported. Avoid violent collision and exposure Do not transport with strong oxidizers.
CAS 74-31-7 HS : 2921590090 25kg/drum, 200kg plastic drum, 200kg steel drum; 1000kg IBC, or as per your requirement. It can be used as the antioxidant to prolong the storage shelf life of the solid propellant. It has also been used for those natural, styrene-butadiene, acrylonitrile-butadiene, cis-butadiene, butyl, hydroxyl termindated polybutadienen, polyisoprene rubber or latex to possess performances, such as, good flexible and crack resistance, enhancing the tensile stress, strengthening the defending function to hot and oxygen, ozone and some harmful metals like copper, manganese. It has no influence on vulcanization of those rubbers. It can resolve aging problem existing in the deep-color rubber products while antioxidant H is used together with antioxidant D. Moreover, it can also be used as the hot and oxygen stabilizer for those engineering plastics, such as polyethylene, polypropylene, polyamide, polyformaldehyde and etc to improve their climate-resisting performance. The suggested dosage is 0.2-0.3%.
CAS 1679-53-4 HS 2918199090 25kg/bag It can be added in cosmetics as sebum secretion inhibitor. It can also be used in the electronics industry. Package and Storage: 25kg/bag, also can provide different specifications according to customers' packaging.Store in a cool, ventilated warehouse. Keep away from fire and heat sources. Prevent direct sunlight. Keep the container tightly closed. It should be stored separately from oxidants, acids, acid chlorides, carbon dioxide, and edible chemicals, and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is forbidden to use mechanical equipment and tools that easily generate sparks. The storage area should be equipped with leakage emergency treatment equipment and suitable storage material
CAS 12018-10-9 HS : 28415000 25KG/DRUM Application: Copper chromite has been used as an efficient catalyst of organic reactions, such as hydrogenation, dehydration, cyclization, alkylation of organic compounds, the reaction of transforming aniline into diphenylamine, and preparation of caprolactam, etc. It could also be used as a catalyst on environmental protection of eliminating organic wastes and carbon monoxide from waste gas generated by engine. It has been used as an efficient burning rate catalyst of composite solid propellants in spaceflight. - Sealents - Polymers - Electrical insulation materials - Waterproofing and corrosion protection materials - Coating
CAS 105-60-2 HS ocde 4002191100 25KG/BAG,25mt/20'FCL Caprolactam is white crystal or crystalline powder at room temperature. Solid appearance is white, flake solid. It is an important organic chemical raw material, the main use is through polymerization to generate polyamide slices (usually called nylon -6 slices, or nylon -6 slices), can be further processed into nylon fiber, engineering plastics, plastic films. Nylon -6 slices have different application fields with different quality and index. Widely used in textile, automobile, electronics, machinery and other fields. (1) Most of caprolactam is used to produce polycaprolactam, about 90% of which is used to produce synthetic fiber, and 10% is used as plastic, which is used to manufacture gears, bearings, pipes, medical devices, electrical and insulating materials. It is also used in coatings, plastic agents and a small amount of lysine synthesis. (2) It is mainly used to make caprolactam resin, fiber and artificial leather, and also used as raw materials.
CAS 100-42-5 HS code 2902500000 180KG/drum,14.4tons/20GP Styrene is an organic compound with the chemical formula C6H5CH=CH2. This derivative of benzene is a colorless oily liquid, although aged samples can appear yellowish. The compound evaporates easily and has a sweet smell, although high concentrations have a less pleasant odor. Styrene is the precursor to polystyrene and several copolymers. Styrene is mainly used in the production of styrene series resins and styrene-butadiene rubber. It is also one of the raw materials for the production of ion exchange resins and pharmaceuticals. In addition, styrene can lso be used in industries such as , dyes, pesticides, and mineral processing.
CAS 67-56-1 HS code 29051100 Packaging: 160kg*80drum,12.8tons/FCL. Methanol, also known as methyl alcohol, amongst other names, is a chemical and the simplest alcohol, with the formula CH3OH (a methyl group linked to a hydroxyl group, often abbreviated MeOH). It is a light, volatile, colourless, flammable liquid with a distinctive alcoholic odour similar to that of ethanol (potable alcohol).A polar solvent, methanol acquired the name wood alcohol because it was once produced chiefly by the destructive distillation of wood. Today, methanol is mainly produced industrially by hydrogenation of carbon monoxide. Methanol consists of a methyl group linked to a polar hydroxyl group. With more than 20 million tons produced annually, it is used as a precursor to other commodity chemicals, including formaldehyde, acetic acid, methyl tert-butyl ether, methyl benzoate, anisole, peroxyacids, as well as a host of more specialised chemicals..
CAS 75-65-0 HS code Package & Storage of Tert-Butanol : 155 KG Drum , 12.4 MT/20'FCL Mainly used as organic solvents and chemical raw materials, but also the preparation of drugs, spices of raw materials. Tert-butylalcohol(TBA), also known as trimethylmethanol, 2-methyl-2-propanol, etc., forms four isomers of butanol with n-butanol, isobutanol, and secondary butanol. The pure product is colorless crystal, colorless volatile liquid in the presence of a small amount of water, has a camphor-like odor, hygroscopic, flammable, and has higher toxicity and anesthetics than other alcohols. Soluble in most organic solvents, such as alcohols, esters, ketones, aromatics and aliphatic hydrocarbons, and water can form an azeotrope. These properties make tert-butanol a useful solvent and additive and one of the petrochemical products with a wide range of applications.
CAS 75-91-2 HS code 2909609000 Powder Products Liquid Products
CAS 1336-21-6 HS code 2814200010 Physical and Chemical Properties Ammonium hydroxide, also called Aqua Ammonia, solution of ammonia gas in water, a common commercial form of ammonia. It is a colourless liquid with a strong characteristic odour. In concentrated form, ammonium hydroxide can cause burns on contact with the skin; ordinary household ammonia, used as a cleanser, is dilute ammonium hydroxide. Application 1. Agricultural use: Diluted in agriculture, it can be used as fertilizer. The ammonia concentration of agricultural ammonia water is generally controlled within the range of 15% to 18% nitrogen content, and the carbonization degree is preferably greater than 100%. Fertilization is simple and there are many methods, such as ditch application, surface application, application with irrigation water or spraying. 2. Industrial use: Used in industries such as wool spinning, silk, printing and dyeing to wash wool, woolen fabric, grey fabric, dissolve and adjust pH, and as a dyeing aid. The organic industry is used as an aminating agent, a catalyst for the production of thermosetting phenolic resins, and the inorganic industry is used for the preparation of various iron salts. 3. In industry, it is used for large-scale integrated circuit decompression or plasma CVD to grow silica film as a pH regulator for boiler feedwater. Ammonia is used to neutralize carbon dioxide in feedwater, increase pH, and slow down the corrosion of carbon dioxide in feedwater. It is also a protective agent for boiler shutdown, and has a good protective effect on boilers that have a small amount of stored water that cannot be discharged. 4. In medicine, dilute ammonia water is used to stimulate respiration and circulation, treat fainting and fainting, and be used as a skin irritant and disinfectant. 5. Used as a detergent, neutralizer, and alkaloid leaching agent. It is also used in the pharmaceutical industry, gauze industry, printing, etc.
CAS 872-50-4 HS code 2933790090 Standard package: 200kg/drum, 16ton /20 GP IBC Drum, 20 ton/20GP N-methyl-pyrrolidone (NMP) is a nitrogen heterocyclic compound with a series of excellent physical and chemical properties. It is non-toxic, has a high boiling point, strong polarity, low viscosity, low corrosivity, high solubility, low volatility and good stability, so it is an efficient, selective solvent for easy recovery. Widely used in petrochemical, electronic materials and other fields. Application: This product is an important chemical raw material, a polar solvent with good selectivity and stability properties , low toxicity, high boiling point , strong solvency, non-inflammable, has many advantages, such as the biodegradation, reutilization, safety in use and suitable for many kinds of prescription,etc. Its main applications are as follows: 1. Reagent grade: mainly used in high-end electronics industry such as liquid crystal, semiconductor. 2. Electronic grade: mainly used in lithium batteries, fiber and other industries. 3.Medicine grade: mainly used in solvents, intermediates and other industries. 4.Industrial grade: mainly used in petrochemical extraction,pesticides, insulating paint and industrial cleaning industries.
CAS 1634-04-4 HS code 29091990 We can provide 150kg/drum or as per customers' requirements. Used as a gasoline additive to increase the octane number, and can also be cracked to produce isobutylene, used as a gasoline additive, with excellent anti-knock properties. It has good miscibility with gasoline, little water absorption and no pollution to the environment. As a raw material for organic synthesis, high-purity isobutylene can be produced Methyl tert-butyl ether (MTBE) is an organic compound with a chemical formula of C5H12O. It is a colorless transparent liquid, insoluble in water, and easily soluble in ethanol and ether. It is an excellent high-octane gasoline additive and anti-corrosion agent.
CAS 8032-32-4 HS code 2710129990 140KG/drum, 80drums/20'fcl , net weight 11.2MT 18MT/ISO TANK 1 solvent naphtha by boiling point range is divided into 120~160�ºC, 120~180�ºC, 140~200�ºC three. It is used as a solvent for coatings made of coal tar pitch, stearic acid pitch, petroleum pitch, etc. The high boiling point components are used as diluents for cellulose esters and synthetic resins, while the others are used as solvents for the manufacture of dye intermediates. Adding petroleum solvent to naphtha can increase the solubility. 2. Used as chemical fertilizer, ethylene production and catalytic reforming raw material, can also be used in the production of solvent oil or as a blending component of gasoline products.
CAS 7647-01-0 HS code 2806100000 Usage of Hydrochloric acid: Hydrochloric Acid used in petrol, chemistry, medicine, paint, paper, textile industries, resin regeneration, pickling, as pH decreaser in potable water and utility waters and production of metal chlorides. Package: 250kgs/drum 80 drums/20'fcl 17.6mts/20'fcl 1.15mts/IBC drum 20 drums/20'fcl 23mts/20'fcl
Specification: CAS No.: 1333-74-0 EINECS No.: 215-605-7 UN No.: UN1049 Purity: 99.999% ,99.9999% Dot Class: 2.1 Appearance: Colorless Grade Standard: Industrial Grade, Grade, Electronic Grade.
CAS 7647-01-0 HS code 28061000 Hydrogen Chloride, HCL Specialty Gas Application Packaged hydrogen chloride (HCl) is used in a range of industries and applications including: Chemicals: To promote and regenerate catalysts in the petrochemical industry and to add viscosity to oils. Also used for hydrochlorinations, e.g. production of methyl chloride, oxichlorinations and vinyl chloride. Hydrogen chloride is also used to produce sulfuric chlorohydrins, synthetic rubbers, etc. Electronics: High purity gas is widely used in the electronics industry. It is a chlorine carrier produced by high temperature cracking. Applications: scouring furnaces (quartz chambers), dissolved in water as an aqueous cleaning agent to prepare metal surfaces for electro plating, selective etching of windows in electronic microcircuits and carrier for non-volatile elements in the form of gaseous chloride. Food & Beverages: To remove the remaining fibres from cotton seeds after the cotton wool has been separated and before the seed is stored for re-sowing next season and also to separate cotton from wood. Steel & Metals: Used in the production of hard metal. Pharma & Biotechnology: Used in pharmaceutical synthesis. 1.Electronic grade usage: It is mainly used for gas phase polishing, epitaxial base corrosion and carbide manufacturing of single crystal silicon in semiconductor device production. 2.Chemical grade usage: Pharmaceutical intermediates, food and feed additives, chemical reagents and film developers and other fine chemicals manufacturing industry. 3.Industrial grade usage: Synthesis of pesticide intermediates, feed additives, chemical reagents and other fine chemicals
CAS 79-20-9 HS cose 2915390090 1.Methyl acetate is a fast drying solvent of nitrocellulose and cellulose acetate, which is used in paints and coatings. 2. It is also used in the manufacture of artificial leather and spices and as an extractant of oil. 3.It is also a raw material for making dyes . 4. In the experimental study, it is used as standard material and solvent for chromatographic analysis, and also used for the separation of lithium chloride from alkali metal chloride and the synthesis of spices. Methyl acetate is an important solvent and organic chemical raw material. It is used in Production of oil and diesel. High-purity methyl acetate is also widely used in the synthesis of acetic acid, acetic anhydride, methyl acrylate, vinyl acetate and acetamide. The carbonylation of methyl acetate to produce acetic anhydride is currently the most economical process for producing acetic anhydride, and its market application prospects are very broad. The market price of high-purity methyl acetate is 2~4 times higher than low-purity methyl acetate. Therefore, the production of high-purity methyl acetate has greater economic benefits. Used 1.Methyl acetate is a fast drying solvent of nitrocellulose and cellulose acetate, which is used in paints and coatings. 2. It is also used in the manufacture of artificial leather and spices and as an extractant of oil. .It is also a raw material for making dyes. 3. In the experimental study, it is used as standard material and solvent for chromatographic analysis, and also used for the separation of lithium chloride from alkali metal chloride and the synthesis of spices.
CAS 110-82-7 HS code 2902110000 1.Used as solvent of rubber, paint and varnish, thinner of adhesiveand oil extractant. 2.It is used as analytical reagent, such as solvent, standard substancefor chromatographic analysis. It is also used in organic synthesis. 3.Cyclohexane is a cleaning and degreasing agent. Mos level ismainly used for discrete devices, medium and large-scale inte-grated circuits, and bv- lll level is mainly used for very large-scaleintegrated circuits.
CAS 57-55-6 HS code 2905320000 Packaging: 215kg*80 drums,17.2ton/FCL; 23ton/Flexitank. Propylene glycol (IUPAC name: propane-1,2-diol) is a viscous, colorless liquid, which is nearly odorless but possesses a faintly sweet taste. Its chemical formula is CH3CH(OH)CH2OH. Containing two alcohol groups, it is classed as a diol. It is miscible with a broad range of solvents, including water, acetone, and chloroform. In general, glycols are non-irritating and have very low volatility. It is produced on a large scale primarily for the production of polymers. In the European Union, it has E-number E1520 for food applications. For cosmetics and pharmacology, the number is E490. Propylene glycol is also present in propylene glycol alginate, which is known as E405. Propylene glycol is a compound which is GRAS (generally recognized as safe) by the US Food and Drug Administration under 21 CFR x184.1666, and is also approved by the FDA for certain uses as an indirect food additive. Propylene glycol is approved and used as a vehicle for topical, oral, and some intravenous pharmaceutical preparations in the U.S. and in Europe. It is produced on a large scale primarily for the production of polymers. In the European Union, it has E-number E1520 for food applications. For cosmetics and pharmacology, the number is E490. Propylene glycol is also present in propylene glycol alginate, which is known as E405. Propylene glycol is a compound which is GRAS (generally recognized as safe) by the US Food and Drug Administration under 21 CFR x184.1666, and is also approved by the FDA for certain uses as an indirect food additive. Propylene glycol is approved and used as a vehicle for topical, oral, and some intravenous pharmaceutical preparations in the U.S. and in Europe.
