Methyl Tert-Butyl Ether (Mtbe)

Methyl tert-butyl ether (MTBE) is a colorless, transparent, low-viscosity, volatile liquid with a distinctive odor and an oxygen content of 18.2%.

lts vapor is heavier than air. Diffuses along the ground and burns when co-existing with strong oxidants.

The main use of methyl tert-butyl ether is as an organic solvent and can also be used as a gasoline additive to make it more antiknock.



Application

ethyl tert-butyl ether (MTBE) is mainly used as gasoline additive, has excellent knock resistance, improves octane number, and can also be cracked to produce isobutene has good miscibility with gasoline, less water absorption, no pollution to the environment, can be improved as an analytical solvent, extractant, in chromatography especially high pressure liquid chromatography as a removal agent, and some polar solvents such as water, methanol, ethanol and other azeotrope formation. Mtbe also has a mild narcotic effect. Ethyl tert-butyl ether (MTBE) is mainly used as gasoline additive, has excellent knock resistance, improves octane number, and can also be cracked to produce isobutene has good miscibility with gasoline, less water absorption, no pollution to the environment, can be improved as an analytical solvent, extractant, in chromatography especially high pressure liquid chromatography as a removal agent, and some polar solvents such as water, methanol, ethanol and other azeotrope formation. Mtbe also has a mild narcotic effect.

Methyl tert-butyl ether (MTBE) is a colorless, transparent, low-viscosity, volatile liquid with a distinctive odor and an oxygen content of 18.2%.

lts vapor is heavier than air. Diffuses along the ground and burns when co-existing with strong oxidants.

The main use of methyl tert-butyl ether is as an organic solvent and can also be used as a gasoline additive to make it more antiknock.

Application

ethyl tert-butyl ether (MTBE) is mainly used as gasoline additive, has excellent knock resistance, improves octane number, and can also be cracked to produce isobutene has good miscibility with gasoline, less water absorption, no pollution to the environment, can be improved as an analytical solvent, extractant, in chromatography especially high pressure liquid chromatography as a removal agent, and some polar solvents such as water, methanol, ethanol and other azeotrope formation. Mtbe also has a mild narcotic effect. Ethyl tert-butyl ether (MTBE) is mainly used as gasoline additive, has excellent knock resistance, improves octane number, and can also be cracked to produce isobutene has good miscibility with gasoline, less water absorption, no pollution to the environment, can be improved as an analytical solvent, extractant, in chromatography especially high pressure liquid chromatography as a removal agent, and some polar solvents such as water, methanol, ethanol and other azeotrope formation. Mtbe also has a mild narcotic effect.

1,3 Dichloro acetone
2. 4-Amino-1,2,4-triazole
3. 2 Mercapto 5 Methoxy Benzamedazole
4. 3 chloro propionyl chloride
5. 5 Chloro Valeryl Chloride
6. Acetyl chloride
7. Benzoyl chloride
8. Chloro acetyl chloride
9. Propionyl chloride
10. Pivaloyl Chloride
11. Para chloro benzoyl chloride
12. Boron trifluoride diethyl etherate
13. 2-chlorothiophene
14. Thiophene-2-aldehyde
15. 2,5-Dichlorothiophene
16. 2-Bromothiophene
17. 2-Methyl resorcinol
18. Thiophene 99%
19. 5-Chlorothiophene-2-carboxylic acid (Rivaroxaban Intermediate)
20. 2-Butyl-4-chloro-5-formyl-1H-imidazole (BCFI) (Losartan Intermediate)
21. Cyanuric chloride
22. Benzamidine HCL
23. Glucono Delta Lactone
24. Biphenyl
25. D (-) Tartaric acid
26. L (+) Tartaric acid
27. Cyanoacetic acid 70%
28. Benzylamine
29. 2,6-Diaminotoluene
30. Meta chlorotoluene
31. Di cyclohexylamine (DCHA)
32. 1,2 Dimethoxy ethane (Monoglyme)
33. 2 Methyl THF
34. Acetonitrile
35. Resorcinol
36. 1,4 Dioxane
37. Ethyl bromide
38. N Heptane
39. Diisopropylethylamine (DIPEA)
40. Di isopropyl ether (DIPE)
41. Diisopropylamine (DIPA)
42. Dimethylformamide (DMF)
43. N, N bis(2-chloroethyl) amine HCL
44. Tetra isopropyl titanates (TIPT)
45. Titanium isopropoxide
46. Titanium tetrachloride
47. Tert n butyl titanates
48. Poly butyl titanates
49. Titanium phosphate
50. Tetra octyl titanates
51. N-methyl-2-pyrrolidone (NMP)
52. Tetrahydrofuran (THF)
53. Triethylamine (TEA)
54. N N Dimethyl Acetamide (DMAC)
55. Iso Propyl Acetate (IPAC)
56. Chloro sulfonic acid
57. Ortho nitro chlorobenzene (ONCB)
58. Para nitro chlorobenzene (PNCB)
59. Niacin (Nicotinic acid)
60. Niacinamide (Nicotinamide)
61. Meta Chloro Anisole
62. Meta Bromo Anisole
63. Dibenzoyl-L-tartaric acid monohydrate

OTHER PRODUCTS:
1. N pentane
2. Paraformaldehyde 96%
3. Propionaldehyde
4. Piperdine
5. Piperazine anhydrous
6. Pyridine
7. Sodium borohydride powder
8. Sodium metal
9. Sulphuryl chloride
10. Thionyl chloride
11. 1,2-dichloro ethane (EDC)
12. 1,3-dichloro acetone
13. 2,2-dimethoxy propane
14. 4-chlorobenzophenone
15. Alpha picoline
16. 2-bromobutane
17. Benzenesulfonylchloride (BSC)
18. Benzophenone
19. Benzyl chloride
20. Diglyme
21. Diethyl ether
22. Dimethyl carbonate
23. Dimethyl malonate
24. Dimethyl sulfoxide
25. Ethyl chloroformate
26. Ethyl formate
27. Fluorobenzene
28. Hydrazine hydrate HH 80%
29. Imidazole
30. Iso propyl acetate
31. Malonic acid
32. Methyl acrylic acid
33. Methane sulfonic acid
34. Methane sulfonyl chloride
36. Methyl ethyl ketone (MEK)
37. Methyl tert butyl ether (MTBE)
38. Mono chlorobenzene (MCB)
39. Meta aminophenol
40. N Heptane
41. N Hexane
42. N Propanol (NPA)
43. N, N-dimethyl acetamide (DAMC)
44. N, N-dimethylaniline
45. N Butanol
46. N methyl morpholine

Sulphuric acid 98%
Sulfuric acid (HSO) at a concentration of 98% is one of the most widely used industrial chemicals due to its strong acidic properties and versatility.
Properties of 98% Sulfuric Acid
Chemical Formula: HSO

Concentration: 98% (remaining 2% is water)

Appearance: Colorless, oily liquid

Density: ~1.84 g/cm³ (highly dense)

Boiling Point: ~337°C (639°F)

Melting Point: ~10°C (50°F)

Corrosivity: Highly corrosive to metals, organic materials, and human tissue.

Hygroscopicity: Absorbs moisture from the air, making it a strong dehydrating agent.
Applications of 98% Sulfuric Acid
98% sulfuric acid is a key raw material in numerous industries due to its strong acidic and dehydrating properties. Major applications include:

1. Fertilizer Production
Used in the manufacture of phosphate fertilizers (e.g., superphosphate and ammonium sulfate).

Reacts with phosphate rock to produce phosphoric acid, a key fertilizer ingredient.

2. Chemical Manufacturing
Production of chemicals such as hydrochloric acid, nitric acid, and sulfate salts.

Used as a catalyst or reagent in organic synthesis (e.g., sulfonation, alkylation).

3. Petroleum Refining
Used in alkylation processes to produce high-octane gasoline.

Purification of petroleum products by removing impurities.

4. Metal Processing
Pickling and Cleaning: Removes rust and scale from steel and iron surfaces.

Used in the production of copper, zinc, and other metals.

5. Water Treatment
pH adjustment and neutralization in wastewater treatment plants.

6. Textile Industry
Used in dyeing processes and the production of synthetic fibers.

7. Battery Manufacturing
Key component in lead-acid batteries (though typically at lower concentrations, around 30-50%).

8. Dehydrating Agent
Used in laboratories and industries to remove water from gases and organic compounds.

We can mainly supply three series catalyst as below, which are equivalent to overseas brands BASF-O4-110/O4-111, TOPSOE--VK38/48/59/69 and MECS-LP/XLP-120&110.
Type S101(04-110/VK38/LP-110)
There are four products of type S101, in details, they are S101 (Cylinder); S101-H (Ring); S101-MH (Star ring); S101-YH (Three-Ribs Cylinder).

Type S101 Catalyst is a medium broad temperature vanadium catalyst which promotes the oxidation from SO2 to SO3, and it is developed by China. With 20 years of manufacturing S101 catalyst, it has reached the international advanced level. Due to its high-quality and steady performance,

The advantages of S101 are as listed.
Wide applicability, broad range of temperature, high conversion, and high mechanical strength etc. Ring or plum blossom shaped catalysts have solved some problems that cylinder shaped catalyst encountered; namely, they are small pellets, high pressure drop and high energy consumption, bad resistance of dust accumulation.
Type S101 series are broad temperature catalysts which suit for every bed of converter.

2.Type S108: S108 Cylinder; S108-H (Ring); S108-MH (Star ring); S108-YH (Three-Rib Cylinder)
(O4-111/VK48/LP-120)
Type S108 Series sulfuric acid catalysts are invented in early 80s�¢?? by China. The advantages of them are outstanding. In general, they are low ignition temperature, high activity in low temperature, high-resistant crushed strength etc. If can be used together with medium temperature type catalyst, such as, S101, you can make more profits; for instance, high conversion, and lowering environmental pollution.
Type S108 is low temperature catalysts which suit for 1/3 top of the first bed to decrease inlet operating temperature, and 4th bed, 5th bed to improve equilibrium conversion and decrease gas emission.
3.LS112 Type Cesium Catalyst(VK59/69/Cs120/110)
Low ignition temperature; higher activity in low temperature; high-resistant crushed strength, high anti- poison; high anti- pulverization etc.
LS112 cesium-promoted catalyst integrates not only the active constituent of vanadium pentoxide and the promoters of cesium and potassium salts, but also the carrier of select diatomaceous earth. Its activity under low and high temperature conditions keeps high due to the unique manufacturing process and optimized formulation.
Cesium-promoted catalyst enables new opportunities for improvement in start-up time, energy efficiency of electricity throughout the operating cycle and strong reduction in SO2 emission that far lower than national standard. The product is the all-around catalyst suited for all stages in converter due to its low ignition temperature and good heat tolerance under high temperature condition.
Cs series enables the compliance with pollutant emission standards due to its enhanced activity and longer service life.

Vanadium pentoxide series of sulfuric acid catalysts can be used in the process of sulfuric acid production, to be more specific, is the process of SO2+I/2O2---SO3. With the help of Vanadium Catalyst, the rate of conversion can be improved greatly. It can guarantee the air speed of operation to add 10-20% more when using type star ring catalysts or ring catalysts.
Vanadium catalyst can be applied in many fields, such as, sulfur-based acid production, pyrite-based acid production, nonferrous smelting gas-based acid production, gypsum-based acid production etc.

Take the sulfur and burn it with oxygen to make SO2. Then, direct the stream of SO2 gas into a reactor bed with some vanadium pentoxide catalyst and extra oxygen gas to make sulfur trioxide gas which is the acid anhydride of sulfuric acid.

vanadium pentoxide is added to in the contact phase of making of sulfuric acid. V2O5 acts as a catalyst at 450�¢?? where SO2 is made to react with the left over O2 in the first step.
Vanadium pentoxide series of sulfuric acid catalysts can be used in the process of sulfuric acid production, to be more specific, is the process of SO2+I/2O2---SO3. With the help of Vanadium Catalyst, the rate of conversion can be improved greatly. It can guarantee the air speed of operation to add 10-20% more when using type star ring catalysts or ring catalysts.
Vanadium catalyst can be applied in many fields, such as, sulfur-based acid production, pyrite-based acid production, nonferrous smelting gas-based acid production, gypsum-based acid production etc.
Type S101 Catalyst is a medium broad temperature vanadium catalyst which promotes the oxidation from SO2 to SO3, and it is developed by China. With 20 years of manufacturing S101 catalyst, it has reached the international advanced level. Due to its high-quality and steady performance,

The advantages of S101 are as listed.
Wide applicability, broad range of temperature, high conversion, and high mechanical strength etc. Ring or plum blossom shaped catalysts have solved some problems that cylinder-shaped catalyst encountered; namely, they are small pellets, high pressure drop and high energy consumption, bad resistance of dust accumulation.
Type S101 series are broad temperature catalysts which suit for every bed of converter.

Type S108 Series sulfuric acid catalysts are invented in early 80 s by China. The advantages of them are outstanding. In general, they are low ignition temperature, high activity in low temperature, high-resistant crushed strength etc. If can be used together with medium temperature type catalyst, such as, S101, you can make more profits; for instance, high conversion, and lowering environmental pollution.

Type S108 is low temperature catalysts which suit for 1/3 top of the first bed to decrease inlet operating temperature, and 4th bed, 5th bed to improve equilibrium conversion and decrease gas emission.

Low ignition temperature; higher activity in low temperature; high-resistant crushed strength, high anti- poison; high anti- pulverization etc.
LS112 cesium-promoted catalyst integrates not only the active constituent of vanadium pentoxide and the promoters of cesium and potassium salts, but also the carrier of select diatomaceous earth. Its activity under low and high temperature conditions keeps high due to the unique manufacturing process and optimized formulation.
Cesium-promoted catalyst enables new opportunities for improvement in start-up time, energy efficiency of electricity throughout the operating cycle and strong reduction in SO2 emission that far lower than national standard. The product is the all-around catalyst suited for all stages in converter due to its low ignition temperature and good heat tolerance under high temperature condition.
Cs series enables the compliance with pollutant emission standards due to its enhanced activity and longer service life.