2001J Mainline Packers meet the highest standards for testing and sealing joints of mainline sewer pipes with acrylamide, acrylate or urethane gels. Logiball 2001J Mainline Packers meet the highest standards for testing and sealing joints of mainline sewer pipes with acrylamide, acrylate or urethane gels. A thick, reinforced SBR rubber sleeve is bonded to the stainless-steel core and a layer of softer rubber is applied over the seating portion to provide superior seating against rough surfaces. The smooth outer finish reduces the adherence of the grout on the packer. Logiball 2001J Mainline Packers come with two grout ports and a third port dedicated for the test medium (air or water). MAIN FEATURES: Void Pressure Monitoring Systems: Two different void pressure monitoring systems are available to accurately transmit the void test and grouting pressures to a gauge read by the camera or through a pressure transducer. The conventional localized sensor is recommended for acrylamide and acrylate grouts. The in-wall water chamber sensor is recommended for stickier grouts such as urethane gels and polyurethanes. The 2001J Packer can be ordered with both systems or one of the two as needed by customer. Dedicated Test Port: By using a dedicated hose from the truck to the packer for the test medium (air/water), â??Hâ?? blocks are eliminated and the mixing ratio of the two-part grout is kept constant (no flushing of the catalyst when testing). Features Three-Function Adjustable Rubber Check-Valve: They provide added safety against syphoning the tanks and unwanted backflow contamination into the hoses, and provide a good mixing of the two-part chemicals through the fan like stream of the opposed and adjacent ports. The Autotesting Concept: When inflating the 2001J packers, the ends first seal against the pipe wall, while its central portion progressively expands, trapping air and water, and compressing it into the mixing chamber. The pressure in the chamber is transmitted through the improved liquid filled sensor and/or the in-wall water chamber sensor to a gauge or transducer installed on the packer. The operator can tell if a joint is obviously good or not by simply inflating the packer over it. By avoiding time consuming conventional tests, productivity could be increased by as much as 30%. Logiball 2001J Packers approximate void volumes. ICGA promotes the proper use of chemical grouting as a safe, economical and effective mean to reduce ground water.
Logiplug inflatable sewer plugs Logiplug inflatable sewer plugs can be used in a wide variety of applications such as by-pass pumping, flow control and flow diversion. Logiplug pneumatic plugs can be used for completely stopping water flow when the flow-thru is plugged off. Logiplug rubber plugs are manufactured on lightweight aluminum mandrels. Steel or stainless-steel mandrels are also available upon request. The SBR rubber sleeve is reinforced with two plies of nylon cords for increased durability. Different types of elastomers are available depending on your needs. All Logiplug inflatable sewer plugs are factory tested, at an inflation pressure corresponding to twice the recommended pressure. Each plug is shipped with an inspection certificate and a safety information leaflet.
GREENMAX Polystyrene Densifier A-C100, manufactured by Incto-recycling, simplifies foam block handling and recycling. This foam compactor is designed for easy operation, installation, and maintenance, ensuring hassle-free usage. Whether you need to compact EPS, PSP, or XPS materials, this densifier helps you do it effectively, making it easier to handle, transport, and recycle these lightweight but bulky foams. With its intelligent design, it offers a practical solution for recyclers, compacting waste loose EPS foam for easy storage and transport. Applicable materials include EPS (Styrofoam), PSP (Polystyrene Paper), and XPS (Extruded Polystyrene).
Elemental Oxide Chemistry IGM Kaolin ----------------------------------------------------------------------------- Silica SiO2 46.2% Alumina Al2O3 37.8% Magnesia MgO 0.1% Potash K2O 0.67% Soda Na2O
High Purity Silica Sand Multi Use, ready for shipment. Particle Size (typical) : >0.6mm;
Canadian A4 Copy paper in 70,75 and 80 gsm. Premium quality.
Jet A1 available FOB Rotterdam Procedures are striaghtforward 5m BBL/mo avail, Cyprus origin.
Appearance - Clear & Bright Delivery - CIF, TTO Payment Terms - SBLC, DLC
Product - light crude Quantity - 2million barrels minimum Duration - 12month contract FOB Payment - Escrow account Delivery - China
PRODUCT JET FUEL A1 91/91 PRICE GROSS: USD$106/Barrel, NET: USD$102/Barrel COMMISSION USD$2/BARREL SELLER SIDE, USD$2/BARREL BUYER SIDE QUANTITY 2,000,000 Million barrels PER MONTH DELIVERY TERM COST INSURANCE AND FREIGHT (CIF) PAYMENT TERMS SBLC MT760, MT103/TT DESTINATION PORTS ANY SAFE WORLD PORT CONTRACTUAL PERIOD SPOT / 12 MONTHS CONTRACT+ ROLLS/EXTENTION
PRODUCT JET FUEL A1 91/91 PRICE GROSS: USD$106/Barrel, NET: USD$102/Barrel COMMISSION USD$2/BARREL SELLER SIDE, USD$2/BARREL BUYER SIDE QUANTITY 2,000,000 Million barrels PER MONTH DELIVERY TERM COST INSURANCE AND FREIGHT (CIF) PAYMENT TERMS SBLC MT760, MT103/TT DESTINATION PORTS ANY SAFE WORLD PORT CONTRACTUAL PERIOD SPOT / 12 MONTHS CONTRACT+ ROLLS/EXTENTION
Product INFORMATION ----------------------------------------------------------------------------------- Product: AUTOMOTIVE GAS OIL (AGO) Origin: RUSIA, KAZAKHSTAN, CHINA Delivery Terms: CIF ANY SAFE WORLD PORT (ASWP) Trail Quantity: 30,000 METRIC TONS Price: USD$450 PER METRIC TON Payment terms: DLC(MT700), SBLC(MT760), MT103(TT WIRING) TRANSFER SPECIFICATIONS ------------------------------------------------------------------------------------- PARAMETER TEST METHOD IP/ASTM LIMITS Specific Gravity 15/15 deg C 160 / D1298 0.820min, 0.870 max Distillation: Recovered @ 357 deg C (% Vol. EBP deg.) 123 / D86 90 min, 385 max Color (ASTM) D 150000 3 max Flash Point (deg. C) 34 / D93 66 Total Sulphur ( % wt) x-ray 0.3 max Copper Corrosion (3 hr @ 100 deg. C) 154 / D130 No. 1 Strip max Kinematic Viscosity @ 38 deg. C (Cst) 71 / D445 1.6 5.5 Cloud Point (deg. C) 219 / D2500 4.4 max Carbon residue (% wt.) D189 0.15 max Acidity (inorganic acid) Nil Total Acid Number (mg KOH/gm) 139 / D974 0.50 max Ash Content (% wt.) 4 / D482 0.01 max Sediment (% wt.) 53 / D473 0.01 max Water by Distillation 74 / D95 0.05% max Diesel Index IP 21 47 min
Titanium ore (73% titanium,20.41% iron metal)
100 tons of Titanium ore 73% titanium and 20.41 iron metal
**Global dealer and supplier of Silicon Metal 441 & 553 looking for buyers in Canada** 441 Specifications Si 99.1% Min Fe 0.4% Max Al 0.4% Max Ca 0.1% Max 553 Specifications Si 98.5% Min Fe 0.5% Max Al 0.5% Max Ca 0.5% Max CIF from Turkey Packing 1000kg Jumbo Bags Sizing from 1 to 10cm
.k2 sheets and spray liquid and incense available k2 spray k2 liquid k2 sheets k2 paper, k2 spice papers
If you're in the market for a car, let me know the brand, year, and model you're looking for. I can help you find both used and brand new options
Material: Tantalum. Chemical Composition: Tantalum (Ta)= 34,7 % Niobium (Nb)= 12,5 % Titanium Dioxide (TiO2)= 0,88 % Tungsten(W) = 10,8 % Vanadium (V)= 11,2 % Hafnium (Hf) = 12,5% Packaging: container. Delivery: ready for shipping. Min Purchase Order: Minimum Quantity: 26 MT (metric tons) Max Purchase Order: 1200 MT per month with production increases. The business model shall initially be tested with a 26 MT purchase order (PO). Thereafter, the quantity could be increased as demanded. For large POs, a face-to-face meeting is a requirement. Price: Will be sent by email
technical specifications Material: Tantalum. Chemical Composition: Tantalum (Ta)= 34,7 % Niobium (Nb)= 12,5 % Titanium Dioxide (TiO2)= 0,88 % Tungsten(W) = 10,8 % Vanadium (V)= 11,2 % Hafnium (Hf) = 12,5% Product Presentation: Mesh 200 Product Packaging: Double ring drum. Min Purchase Order: 26 MT (metric tons). It fits in 1 Container. Max Purchase Order: 1200 MT per month with production increases. The business model shall initially be tested with a 26 MT purchase order (PO). Thereafter, the quantity could be increased as demanded. For large POs, a face-to-face meeting is a requirement. Stock availability: The product is ready for shipping. Place of delivery: FOB - Santa Marta, Colombia. Method of payment: The payment is made by trust, escrow or letter of credit which becomes effective at the time of mineral verification and before its movement to another destination. Cost: USD $73 / kg
Polystyrene sheets for recycling. 4 to 6 tons on an ongoing basis available.
