Origin: Indonesian Types: Sub-bituminous, Lignite (Brown), Bituminous, Anthracite Gross Caloric Value: GAR 7000 - GAR 5000 Moisture Content: 15 - 30% or > Ash Content: 5 - 15% Sulfur Content:
.Fix carbon 95% Calcined anthracite coal for sale Anthracite Filter Media is thoroughly selected from anthracite which yields the highest percentage of carbon. It is then hydraulically classified to reduce mineral matter and ash to a minimum, and finally screened and washed to ensure suitability for filtration purposes. Anthracite filter coal or Anthrafilt is commonly used as sub-fill and as a component of multi-media filters. Anthracite filter media is a durable media with long life and a wide temperature range. It contains no silica to interfere in the production of ultra pure water. Anthracite promotes higher service flow rates and longer filter runs with less head loss than single media filter beds. Backwash rates are reduced as well. Low uniformity coefficient anthracite filter media extends the life of your filter before the media must be changed out. Higher service flows and longer filter runs than equivalent sand filters. â?¢ Unique density allows Anthracite to be combined with other filtration media in multi-media filters. â?¢ Lower uniformity coefficient has less oversized and undersized particles resulting in a highly uniformed bed. â?¢ Due to its medium density, Anthracite can be used in multi-media bed filters providing a unique pre-filtration layer. Anthracite coal filter media Application Anthracite Filter Media is widely used in the process of water quality treatment before and after the production of chemical, metallurgical, thermoelectric, pharmaceutical, papermaking, printing and dyeing, food and so on.
Activated carbon, also known as activated charcoal, is a form of carbon processed to have small, low-volume pores that increase its surface area. This increased surface area makes activated carbon highly effective for adsorptionâ??a process by which molecules and ions adhere to the surface. Here are some key points about activated carbon: Production: Activated carbon is typically produced by heating carbonaceous materials, such as wood, peat, coconut shells, or sawdust, in the presence of a gas that does not react with the material, creating a porous structure. Porous Structure: The activation process creates a highly porous structure with a large surface area. This structure allows activated carbon to adsorb a wide range of substances onto its surface. Adsorption Properties: Activated carbon is widely used for adsorbing various impurities and contaminants from liquids and gases. It can effectively remove organic compounds, chemicals, odors, and even some metals. Applications: Activated carbon finds diverse applications in various industries, including water treatment, air purification, food and beverage processing, pharmaceuticals, and environmental cleanup. It is used in water filters, air purifiers, gas masks, medical treatments, and more. Water Purification: Activated carbon is commonly used in water treatment processes to remove impurities, chlorine, organic contaminants, and undesirable odors, improving the taste and quality of water. Air Purification: In air purification systems, activated carbon filters can capture and remove volatile organic compounds (VOCs) and other airborne pollutants, contributing to cleaner air. Medical Uses: Activated carbon is used in certain medical treatments and poison control efforts. It can be administered orally to absorb toxins in the gastrointestinal tract. Gold Recovery: Activated carbon is also used in the gold mining industry for the recovery of gold from cyanide solutions. Environmental Remediation: Activated carbon is employed in environmental cleanup efforts to adsorb pollutants from soil and water, aiding in the remediation of contaminated sites. Reactivation: Activated carbon can sometimes be regenerated or reactivated after use by exposing it to high temperatures to remove adsorbed impurities, allowing it to be reused. Activated carbon's versatility and adsorption capabilities make it a valuable material in numerous applications where purification and removal of contaminants are essential.
RB1 Specifications (SCoTA) Calorific Value (Basis): 6,000 kcal/kg NCV Calorific Value (Min): 5,850 kcal/kg NCV Total Moisture (ARB): Maximum 12.0% Volatile Matter (ARB): Minimum 22.0% Ash (ARB): Maximum 15.0% Sulphur (ARB): Maximum 1.0% Hardgrove Grindability Index (HGI): 45 70 Nominal Topsize: 50 mm Initial Deformation Temperature (IDT): Minimum 1,250 �°C (in a reducing atmosphere) Calcium Oxide in Ash (DB): Maximum 12.0% RB3 Specifications (SCoTA) Calorific Value (Basis): 5,500 kcal/kg NCV Calorific Value (Min): 5,300 kcal/kg NCV Total Moisture (ARB): Maximum 14.0% Volatile Matter (ARB): Minimum 20.0% Ash (ARB): Maximum 23.0% Sulphur (ARB): Maximum 1.0% Hardgrove Grindability Index (HGI): 45 70 Nominal Topsize: 50 mm Initial Deformation Temperature (IDT): Minimum 1,150 �°C (in a reducing atmosphere)
Coal like steam coal, diesel, crude oil..
Steam coal, coking coal.
PROXIMATE ANALYSIS OF COAL G1-GCV: Exceeding 7000 and not exceeding 7600 Kcal/Kg Moisture (%): 2.10 - 2.60 Ash (%): 3.00 - 10.50 Volatile Matter (%): 38.00 - 42.00 Fixed Carbon (%): 44.90 - 56.90 Sulphur (%): 2.30 - 3.10 Caking Index: 20 - 24
Color Black or brown, varying shades Texture Can be smooth, granular, or banded Hardness Soft to hard, depending on coal type Luster Dull to shiny Density Varies depending on coal type, typically around 1.2-1.5 g/cm�³ Porosity Varies, can be porous Composition Mainly composed of carbon, along with hydrogen, sulfur, oxygen, and trace minerals Moisture Content Can range from a few percent to over 30% Volatile Matter Varies, typically 20-45% Fixed Carbon Varies, typically 40-90% Ash Content Varies, typically 3-30% Heating Value (BTU/lb) Varies depending on coal type, typically 8,000-14,000 BTU/lb Heating Value (MJ/kg) Varies depending on coal type, typically 24-33 MJ/kg Combustion Characteristics Burns to release heat, producing carbon dioxide and other gases
We are the products direct end sellers and the goods come from our direct mining sources from more than 10 African countries. Buyer and seller agree on price and other terms and sign contract. Buyer shall submit POF or BCL . Buyer must be qualified for purchase and seriousness. Inquire within by issuing LOI from the Buyer. No exceptions.
Steam coal
Forsale Kazakhstan Coal to the China border Alashanko Station. Can supply 1 million MT per month. Send specifications. Iron ore 62+, copper ore 10 +, nickel ore 1.5+ from the Philippines. New mining operations opening Australia 1 million MT per month to 3 million MT per month. Also has Quartzite 99 % and Gypsum. Contact
Have coal on the Chinese border Alashanko Station. Can supply 1 million MT per month. Kazahstan origin. From the Philippines iron ore fe 62+,copper ore, nickel ore.
We are a trusted supplier of coal, gypsum, cement, palm oil, sugar, and rice. .
Mining products: including metals, coal, bauxite ores, oil shale, gemstones, limestone, chalk, dimension stone, rock salt, potash, gravel, and clay..
Thermal coal/Steam coal
High quality Thermal Coal -Colombia Origin Send me email to provide you with SGS Certificated
Euro pallets, lithium ore (full solution), medical ppe products of nordic protect brand, a4 paper, covid test kits, wood pellets, coal, halal chicken, halal beef.
PRODUCT: Thermal Coal ORIGIN: USA SPECIFICATIONS: See Photo - Available upon request PACKING: Bulk QUANTITY: MOQ 25,000 MT PRODUCT PRICE: $135.00 USD MT (One Hundred and Thirty Five United States Dollars Per Metric Ton) DELIVERY: FOB Port Savanah Georgia TERMS: Irrevocable Confirmed Letter of Credit SELLER�´S PERFORMANCE BOND: 2% of the monthly contract value (In the case of an ongoing contract). SPECIFICATIONS: % Moisture - 8.50(As Recd) % Ash - 18.46(As Recd) % Ash - 20.17(Dry Basis) % Volatile - 24.30(As Recd) % Volatile - 26.66(Dry Basis) % Fixed Carbon - 48.65(As Recd) % Fixed Carbon - 53.17(Dry Basis) % KCal/kg - 6,028(As Recd) % KCal/kg - 6,588(Dry Basis) % Sulfur - 0.80(As Recd) % Sulfur - 0.87(Dry Basis)
Product: Thermal Coal Type B Origin: Colombia Contract: 12months with an extension available for 36 months shipments every 20 days. Quantity: Starting 35.000 Tons / Month with the possibility to increase to 70.000 after 3 months and the possibility for more. Nearest Port: Port Tulu - Golfo de Morrosquillo Terms: EXW / 51.20 USD / Ton Payment: Irrevocable LC, Inspection: Bureau Veritas Colombia LTD Analysis Certificate available on request
Origin: Indonesia. Available in CIF or FOB terms. Indonesian Coal grades ICI 1, ICI 2, and ICI 3 are classified based on their calorific values and other specifications. They are widely used in power generation and industrial applications due to their high energy content and low impurities.
