Drilling capacity in: - Concrete / steel / non-ferrous metals / wood: 22 / 13 / 22 / 30 mm - Core cutter (TCT cutter only) in masonry up to: 60 mm No load rpm: 0-1300 min–1 No load impact rate: 6200 min–1 Weight: 2.6 kg Power input: 650 W.
Machine tools, lathes.
# Callipers Measuring range of 0-1000 mm; # With and without fine tunning; # Material – constructional or stainless steel; # Mat chromed scale; # Reading – 0.1 and 0.05 mm. # Special callipers 3-point vernier calliper; # 5-point vernier calliper; # Marking-off vernier calliper; # Weld seam gauge; # Other types. # Vernier depth gauges Measuring range of 0-500 mm; # Reading 0.1 and 0.05 mm; # Material – constructional or stainless steel; # Mat chromed scale. # Micrometers Measuring range of 0-25; 25-50; 50-75; 75-100 mm; # Reading – 0.01 mm; # Measurement reading surface of hard alloys (carbide). Range 0-25 mm. # Coordinate small size tables One-coordinate; # Two-coordinate; # Three-coordinate; # Stroke along the coordinate: 0-25 mm # Measuring stands Type A2 – with magnetic switch at the base; # Type A4 – with cast-iron base and T-shaped groove; # Type B3 – with square-riffled table; # Micrometer holder. # Smooth gauges Plug gauges – one sided; # Plug gauges – two sided; # Snap gauges. # Thread gauges Thread plug calipers – one sides; # Thread plug calipers – two sides; # Thread ring gauges. # Smooth rings Reference rings; # Setting rings Range: 6-150 mm. # Squares and rulers Flat squares; # Squares with base; # Checking rulers; # Templates. # Angle gauges Protractor with lock screw Range 80x120 – 300x500 mm; # Protractor with sliding rod Range 120x240 – 300x500 mm Reading - 1° # Marking-off tools (scribers) Straight scriber – one sided (with knurled handle); # Bended tip scriber – two sided (with knurled handle); # Trammel for tracing and marking with small base; # Vernier caliper with two needles and fine adjustment; # Height gauge with fine adjustment.
Power tools, angle grinders, grinders, drills, rotary hammers, demolition hammers, jig saws, drywall screwdrivers, cordless tools.
Nickel-based dental alloys, cobalt-based dental alloys, solder rods.
Machine tools, cutting tools, wood working machines and tools, electric motors, lifting equipment.
Tools, power tools, fasteners, household products.
Medical disposables - laboratory equipment, vacuum tubes, needles, lancets, non-wowen cloths, gowns, caps, face masks, shoe covers, , gauze products , swabs, gauze on rolls, zinc oxide and other plasters, sterile syringes, needles, infusion and transfusion sets, i.V cannula, folley.
Medical equipment: protective disposable masks, kn95 masks, n95 masks, pvc (latex) gloves, nitrile glove, disposable medical protective suits, thermometers.
Medical disposable & medical supplies, consumables for dental offices, laboratory consumables, general medical supplies..EXW
Medical consumables: transfusion and infusion sets; syringes two and three component and injection needles; tubes, catheters and drains; urine collecting bags and urology catheters; oxygen masks eschmann type and oxygen nasal catheters, plastic throat and gynaecological pallets and umbilical cord clamps; polyethylene gloves, gynaecological speculums; medical clothes and drapes for single use made of non woven fabrics: surgical clothes, visitors overalls, protective and working clothes for the pharmaceutical and food industry, caps, masks, shoe covers short and long., sterile sets , surgical clothes, drapes, caps, masks.
Medical face mask,, covid 19 igm/igg rapid test,, surgical mask, contact thermometer,, irt 200,, tm 750 infrared multifunctional thermometer,, protective gowns box,, shoes covers,, disposable medical hat..
Nitrile gloves, latex gloves, surgical gowns, sterile gowns, reinforced steril surgical gowns, blood glucose test strips, thermometers, blood pressure monitors.
Outdoor & Garden , Kitchen & Bathroom , Home & Bedroom, Household & Textile , Building & Hardware, Painting & Decoration Tools & Equipment, Lighting & Electrical, Tiling & Flooring, Heating & Plumping, Roofing & Insulation .
Property PE 100MA PE 130MA PE 160MA PE 200MA Nominal press force: 1000 kN 1300 kN 1600 kN 2000 kN Carriage strokes: 18, 30, 51, 72, 85, 98, 115, 129, 146, 150 (mm) 19, 25, 38, 60, 82, 102, 120, 140, 155, 165 (mm) 20, 28, 43, 60, 77, 94, 117, 131, 149, 167, 180 (mm) 21, 33, 61, 117, 143, 165, 184, 200, 211, 220 (mm) Carriage height regulation: 100 (mm) 100 (mm) 100 (mm) 110 (mm) Maximum number of strokes/min: 65 60 50 45 Distance carriage - table: 400 (mm) 440 (mm) 460 (mm) 520 (mm) C-Frame depth: 330 (mm) 360 (mm) 400 (mm) 420 (mm) Working height of the table: 800 (mm) 800 (mm) 800 (mm) 800 (mm) Distance between the columns: 440 (mm) 490 (mm) 530 (mm) 510 (mm) Bolster plate dimensions: 1100x660x80 (mm) 1200x660x80 (mm) 1300x780x90 (mm) 1400x800x100 (mm) Electrical motor power 7.5 (kW) 11 (kW) 15 (kW) 15 (kW) Power of the auxiliary electrical motor regulating the carriage lifting 0.75 (kW) 0.75 (kW) 0.75 (kW) 0.75 (kW) Machine weight without tools and accessories: 8600 (kg) 9800 (kg) 14000 (kg) 16000 (kg) Power supply/frequency/phase ~ 380 V, 50 Hz, 3f ~ 380 V, 50 Hz, 3f ~ 380 V, 50 Hz, 3f ~ 380 V, 50 Hz, 3f Pneumatic system pressure 5.5 – 6 (bar) 5.5 – 6 (bar) 5.5 – 6 (bar) 5.5 – 6 (bar) Maximum number of clutches per minute 15 (cl/min) 15 (cl/min) 15 (cl/min) 15 (cl/min) Maximum weight of the instrument mounted on the carriage: 180 (kg) 300 (kg) 500 (kg) 500 (kg)
glass coating in form of a paint suitable for spraying onto glass to produce colored glass surfaces. Our mixing software produces all Ral, Pantone, NCS and BS color palettes, you can produce over 7,000 colors. Such glass surfaces are used as kitchen backsplashes, countertops, glass doors etc. We are looking to cooperate with serious distributors/users in all countries.Sell ultrafine copper powder (PMU) Isotope-Cu63, Cu65 / Price – USD 350 - 800/kg / Purity- not less than 99,9995% /; Quality - Official certificate of Iasts Giredmet (Russia) and IGAS (Germany). Origin - Russian Federation. Technical characteristics of nickel and nickel wire: not radiation, not toxic does. Application: Copper powder applications include: powder metallurgy (PM), metal injection molding (MIM), friction components, thermal management, diamond cutting tools, lubricants, carbon brush, coatings, catalyst, brazing paste. The Described product, are often used and as financial instrument. Common chemical elements: Element Content Element Content Element Content Ag 10 Mg Mn 2 Si 10 Al 1 Ni
Orthopedic and spine implants, instruments, and general instruments. medical hospital solution, disposable and consumables..Consultation with expert,shiping and packaging,seminars to introduce new products
