Origin: Kingdom Of Saudi Arabia , Destination: Cif Answ, Quantity: Subsequent Deliveries Of 100, 000mt (+/- 5%) For (12) Months Period, Unit Price Cif: Usd$200/mt, Payement Terms: Irrevocable, Confirmed By 20top Bank, Non Transferable, Auto Revolving, Non Operative Dlc/mt700 With An Amount Equal To One (01) Month Shipment To Guarantee Payment. Seller Issues P.Pop And Pb10% To Activate Dlc. 100% Payable Via Swift (mt103/tt) Bank Transfer Within 2 Banking Days After Delivery At Port Of Destination.
Operational Working Procedure For The Required Product:
1. Seller's Mandate Issues Sco (done)
2. Buyer Issues Icpo + Company Profile + Clear Color Copy Of Passport+ Full Banking Information.
3. Seller Issues Fco
4. Buyer Contersigns Fco And Return It With Draft Dlc/mt700
5. Seller Issue Sales And Purchase Agreement (spa) Open For Amendment Buyer Returns To The Seller Countersigned (spa)
6. Seller Verifies And Signs Fina Contract And Forwards To The Buyer Via Official Email With Commercial Invoice
7. Within 02 Banking Days, Buyer Returns To The Seller Contersigned Commercial Invoice
8. Within Ten (10) Banking Days After Issuing Commercial Invoice, Buyer's Bank Issues Irrevocable, Non Transferable, Auto Revolving, Non Operative And Confirmed Dlc/mt700 With An Amount Equal To One (01)month Shipment To Guarantee Payment
9. Within Ten (10) Banking Days After Confirmation Of The Dlc/mt700, Seller's Bank, To Activate Dlc/mt700, Issues Operative And Confirmed Pb10% Of The Amount Of Montly Quantity Value With P.Pop And Authorization To Make Physical Visit.
10. Within 30 Banking Days After Activation Of The Dlc By Seller's Bank, Shipment Commences.
11. Buyer's Bank Releases The Payment By Mt103, Within 02 Banking Days After Receiving Full Documentation And Q&q Sgs At Discharging Port:
12. Within 02 Banking Days After Receipt Of The Payment Via Mt103, Seller Pays Both Side Mandates In The Transaction According Ncnda/imfpa And Subsquently Monthly Shipment Continues As Per Terms And Conditions Of The Sales And Purchase Agreement Contract Between Buyer And Seller.
Guidelines To Note When Preparing Documents Icpo:
1. The Icpo Must Be Addressed To End Seller
2. The Above Procedures Must Be Accepted And Incorporated In The Icpo Word For Word.
3. Expired Icpo Not Accepted. Maximum Validity Of Icpo Is 03working Days From Issue Date
4. The Letterhead Is Genuine, Check For Any Signs Of Cut And Paste Or Scan And Edit. In The Letterhead We Need Complete Company Name, Address, Phone Number, Fax Number And Email Address.
1. Buyer sends ICPO to Seller on receipt of Seller's Soft Offer, along with CPA or Q88, as proof of storage availability and readiness to inject after a successful DT, along with scan of Buyers Passport Info.
2. Seller issues Draft contract /commercial invoice CI, for the available quantity in the storage tank to Buyer, Buyer Signs and returns CI to Seller and parties sign the NCNDA/IMFPA.
3. Seller sends the following to Buyer
a) Injection Report
b) Sellers Tank Receipt.
c) Authorization to visit and verify ATV
d) Authorization to Sell and Collect ATS
e) Product Passport
4. Buyer extends Seller tank for 3 days, to enable the DTA, for a DT and Buyer pays and conducts DT in Sellers tank, after 3 days validated.
5. After a successful Dip Test DT, Buyer provides vessel details (Q88 and CPA) and submits an NOR to prepare for injection of product into Buyers vessel
6. Seller shall immediately submit the SGS Report along with the full Proof of Product to the Buyer. Seller proceeds with product injection into Buyers Vessel.
7. Buyer makes 100% payment by MT103 TT wire transfer for the total product within 78 hrs and Seller transfers the Title Document into Buyers name.
8. Seller supplies Buyer with:
ATSC
Seller Export License
9. Seller pays commission to all intermediaries involved in the transaction 24 hours after confirmation of the Buyers Payment, for initial Spot, as well as each subsequent contract shipment.
10. Seller submits a draft SPA to Buyer, for review for R&E monthly shipments.
11. Buyer receives and approves the SPA, and issues an Irrevocable, Non- transferable, Revolving SBLC/IRDLC for 12 months shipment value, documentary letter of credits for length of contract and for each lift per schedule, inclusive of PB 2%. . Buyer pays after Dip Test by MT 103 wire transfer on each monthly shipment.
11. The subsequent deliveries shall commence accordingly.
KT20H
Load-lifting capacity: 1000, 2000 and 2500 kg
Height of lifting: 115 mm
Length of the forks: from 750 up to 1800 mm
Width of the forks: 540, 685 mm
Standard Machine Specification LCC 800 LCC 1000 LCC 1250
CAPACITY:
Centers height mm 410 510 625
Swing over bed mm 890 1090 1320
Max. turning diameter over guideways for lathes with turret head mm 750 750 1000
Swing over cross slide mm 490 690 940
Swing in gap mm 1050 1250 1500
Width of bed mm 700
Distance between centers mm 1500, 3000, 4000, 5000
Max. turning length in chuck and live center for lathes with turret head mm 1150, 2650, 3650, 4650
MAIN SPINDLE:
Spindle bore mm 155
Spindle nose DIN55027 No. 15
Spindle hole internal taper Metric 160
Front bearing diameter mm 200
HEAD STOCK:
Spindle speed in two ranges rpm 2 - 250; 8 - 1000
Main motor power kW 30
Spindle max. torque Nm 5000
FEEDS:
Longitudinal feeds (Z-axis) M/min 10 (max)
Cross feed (X-axis) M/min 10 (max)
Rapid traverse (Z-axis and X-axis) M/min 10 (max)
Crosslide maximum travel mm 525 525 650
Z-axis feed torque N.m. 26.1
X-axis feed torque N.m. 10
CNC SYSTEM
Options HEIDENHAIN, FANUC, SIEMENS, FAGOR
TOOLHOLDER TURRET HEAD
Tool section mm 40 x 40
Diameter of boring bar mm 40
Turret head position number 8 or 12
TAIL STOCK:
Quill diameter mm 125
Quill internal taper Morse No.6
Quill travel mm 250
Tailstock movement Motorized
NET WEIGHT
DBC 3000 mm Kg 8800 9300 9800
Technical data OL 220 DG OL 222 DG OL 220 DGH OL 220 DGA
Type
Saw-frame rotation range – left/right Manual
45° - 30° Manual
45° - 30° Semi-automatic
45° - 30° Automatic
45° - 30°
Maximum cut off stock
Cutting at angle 90° mm 240 240 240 240
mm 220 220 220 220
mm 275x200 275x200 275x200 250x200
Cutting at angle 45° mm 200 200 200 200
mm 175 175 175 175
mm 190x120 190x120 190x120 190x120
Cutting at angle 30° mm 130 130 130 130
mm 125 125 125 125
mm 130x80 130x80 130x180 130x80
Material level mm 960 960 960 950
Minimum rest in automatic mode mm x x x 380
Sawing speed m/min 30 / 60 30 / 60 30 / 60 (15 – 70) 30 / 60 (15 – 70)
Saw blade dimensions mm 2940x27x0.9 2940x27x0.9 2940x27x0.9 2940x27x0.9
Stock feeding:
single mm x x x 500
repeatedly mm x x x 1000
Power of:
main motor kW 1.1 / 1.5 1.1 / 1.5 1.1 / 1.5 (2.2) 1.1 / 1.5 (2.2)
cooling motor kW 0.18 0.18 0.18 0.18
hydraulic motor kW x x 0.25 0.75
brush kW x x x 0.09
Capacity of:
hydraulic l 1.5 1.5 6 15
cooling l 15 15 15 15
Overall dimensions (LxWxH): mm 1500x800x1600 1500x800x1600 1500x800x1600 1500x2400x1600
Net weight kg 475 475 500 1200
General purpose on copy-milling operations in materials of medium to high tensile strength such as steels up to 1300N/mm, cast iron, aluminum, copper and non-ferrous metals.
glass coating in form of a paint suitable for spraying onto glass to produce colored glass surfaces. Our mixing software produces all Ral, Pantone, NCS and BS color palettes, you can produce over 7,000 colors. Such glass surfaces are used as kitchen backsplashes, countertops, glass doors etc. We are looking to cooperate with serious distributors/users in all countries.Sell ultrafine copper powder (PMU) Isotope-Cu63, Cu65 / Price – USD 350 - 800/kg / Purity- not less than 99,9995% /;
Quality - Official certificate of Iasts Giredmet (Russia) and IGAS (Germany).
Origin - Russian Federation.
Technical characteristics of nickel and nickel wire:
not radiation, not toxic does.
Application:
Copper powder applications include: powder metallurgy (PM), metal injection molding (MIM), friction components, thermal management, diamond cutting tools, lubricants, carbon brush, coatings, catalyst, brazing paste.
The Described product, are often used and as financial instrument.
Common chemical elements:
Element Content Element Content Element Content
Ag 10 Mg Mn 2 Si 10
Al 1 Ni <0.3 Sn <0.2
Bi <0.2 Pb <0.05 Zn <0.2
Ca 8 Sb <0.5
Fe 3 1
Total amount of uncontrolled impurities not more than 0.001% wt.
Total Cu not less than 99.999 %wt.
