Controller
Uhp03smartnet is a 4 channel universal controller. It is intended for solving engineering tasks of average and high difficulty. It contains a wide periphery of inputs/outputs, graphic display and convenient operator interface. Apart from configuration of the device, the controller software also allows the user to record the configuration and test the device. The controller is compatible with scada. Device structure permits development of a console of devices, the number of which depends on the respective application thereof.
Overview
Analog inputs v 4-adc16b
Input signals - pt100, cu53; tc-j, k, s, t; 4 v 20ma
4 regulators v on/off;
3 regulators pid - autotun
Proccesindicator
Totalizer
Digital inputs - 4
Communication rs232/485/422
Protocol - modbus rtu
Analogous output v 2
Relay output - 4 (6a/250v)
Power suply - 85-265 v ac/dc
Realtime clock
Compatibility - scada
Lcd display monochrome - 128 x 64
Number of operator screens - 9
Config software
Annunciator module
Lsb40r is a 39-channel annunciator for technological signalization, intended to draw attention of on-duty operators in command halls in the event of accidents, emergencies or other situations that require their operative intervention. It is compatible with scada. It is applicable for panels at an average distance from the operator and joint management (hardware and software). The tape is suitable for installing in a board or panels/desks.
Technical data
Type Rated output Basic supply Duty cycle Parameters at rated output starting characteristics weight
P1 U S Nn In Cosφ Is Ms Mmax
Kw Hp V - Min-1 A - A Nm Nm Kg
2p=2
A90ll-2ksr 5.5 7.5 230/400 S6-40% 2900 15.7/9.1 0.88 23 21 28.4 25.5
A90lx-2ksr 5.5 7.5 230/400 S1 2800 19.6/11.3 0.93 53 30 38
A100lk-2ksr 5.5 7.5 230/400 S6-40% 2820 11.5/6.6 0.82 39 25 30 29.0
2p=4
A90ll-4ksr 4.2 5.6 3x400 S6-40% 1250 6.5 0.92 22 39 39.6 26.0
A100lk-4ksr 4.0 5.6 230/400 S6-40% 1350 10.6/6 0.88 22 30 34 31.0
A100lx-4ksr
A100lx-4kr 8.0 10.7 230/400 S6-40% 1350 23.4/13.5 0.85 47 70 78 39.0
A100l-4ksr
A100l-4ksrs 5.5 7.5 230/400 S6-40% 1350 16/9.3 0.86 35 52 58 35.0
A112m-4ksr 4.8 6.4 400/690 S1 1420 8/4.6 0.86 26 62 73 41.0
The electric motors can also be produced at different basic supply voltages and frequency.
Three phase asynchronous electric motor with built-in electric-magnet brake
Technical data
Type Rated
Output Basic
Supply
Voltage Duty
Cycle Parameters at
Rated output Starting
Characteristics Rated brake
(Stopping) torque Rated output of
Brake electric
Magnet Basic
Supply
Voltage of brake electric
Magnet
P1 U S Nn In Cosφ Is Ms Mmax
Kw Hp V - Min-1 A - A Nm Nm Nm - -
A90lx-2kslb 5.5 7.5 400v/50hz S1 continuous 2800 11.3 0.93 42 38 42 10 50w 98v
- Single phase el. motors from 0,18 up to 4 kW with starting, running and starting and running cpacitors.
- Three phase el. motors from 0,12 up to 315 kW
Rotation – 3000; 1500,1000 750 rpm
All our motors cover IEC requirements; CE confirmation; IP 44; 54; 55; class F; 50-60 Hz.
DC motors.
We suggest motors as per client’s requirements and drawings.
We can deliver also:
- wood working machines – from 3 to 7 operations
- Chain hoists
- Lathe machines
- Other electrical equipment.
Dimensions mm: 238 L x 238 P x 260 H
Weight kg: 4
Air flow m3/h: 40
For areas up to: 85 m2
Comsumption: 10 W
Power supply: 230 V /~/ 50 Hz
Color: Black
Jonix Cube - blacks and white models
Price offered is 356 euro/ pcs for both colors
Our products are the only ones manufactured in EU in Italy and fully certified by Italian Ministry of Health as being medical devices
Dimensions mm: 238 L x 238 P x 260 H
Weight kg: 4
Air flow m3/h: 40
For areas up to: 85 m2
Comsumption: 10 W
Power supply: 230 V /~/ 50 Hz
Color: White
Jonix Cube - blacks and white models
Price offered is 356 euro/ pcs for both colors
Our products are the only ones manufactured in EU in Italy and fully certified by Italian Ministry of Health as being medical devices
PRODUCT Jet Fuel A - 1
CIF Price - Gross US$ 84 / Net US$ 82
FOB Price - Gross US$ 78 / Net US$ 76 Units - US Barrels Monthly Quantity Restrictions:
Minimum - 2 000 000 / 6 000 000 Maximum
SELLERâ??S APPROVED FOB ROTTERDAM TRANSACTION PROCEDURE TANK TO TANK
1. Buyer issues ICPO, and company registration certificate, data page of Buyerâ??s Passport, and TSA.
2. Seller issues Commercial Invoice (CI) & Warning Letter to Buyer, Buyer signs CI and Warning Letter
and returns back to Seller. Seller provides the below documents to Buyer:
a) Company Registration Certificate,
b) Product Quality Passport (Dip Test Result),
c) Statement of Product Availability, and
d) Certificate of Origin of the Product.
3. Seller logistics team verify Buyerâ??s provided tank farm and upon approval. Buyer shall FIRST pay for
2 days to their Tank Farm Company before the Seller pays for 3 days tank farm lease. Both parties
showing proof of readiness for activation of the GPS Coordinate-Tank storage receipt (TSR) and fuel
transmission program before Injection will proceed accordingly.
4. Seller issues following POP documents to Buyer:
a) Injection report,
b) Dip test authorization letter (DTA) â?? Unconditional,
c) Authorization to Sell,
d) Fresh SGS Report or equivalent, and
e) Authorization to verify the product in Seller's tank (ATV).
5. Buyer conducts Dip test on the product and makes the payment for the total value of product injected
into the tanks through the means of MT103- TT wire transfer.
6. Seller pays all Seller intermediaries involved in the transaction in accordance with the NCNDA/IMFPA.
7. Subsequently monthly shipment continues as per terms and conditions of the Commercial Invoice and
extension of transaction by Seller issuing 12 months contract to Buyer for proceeding.
Drilling capacity in:
- Concrete / steel / non-ferrous metals / wood: 22 / 13 / 22 / 30 mm
- Core cutter (TCT cutter only) in masonry up to: 60 mm
No load rpm: 0-1300 min–1
No load impact rate: 6200 min–1
Weight: 2.6 kg
Power input: 650 W.
