- Single phase el. motors from 0,18 up to 4 kW with starting, running and starting and running cpacitors. - Three phase el. motors from 0,12 up to 315 kW Rotation – 3000; 1500,1000 750 rpm All our motors cover IEC requirements; CE confirmation; IP 44; 54; 55; class F; 50-60 Hz. DC motors. We suggest motors as per client’s requirements and drawings. We can deliver also: - wood working machines – from 3 to 7 operations - Chain hoists - Lathe machines - Other electrical equipment. Cartons on pallets.
Technical data Type Rated output Basic supply Duty cycle Parameters at rated output starting characteristics weight P1 U S Nn In Cosφ Is Ms Mmax Kw Hp V - Min-1 A - A Nm Nm Kg 2p=2 A90ll-2ksr 5.5 7.5 230/400 S6-40% 2900 15.7/9.1 0.88 23 21 28.4 25.5 A90lx-2ksr 5.5 7.5 230/400 S1 2800 19.6/11.3 0.93 53 30 38 A100lk-2ksr 5.5 7.5 230/400 S6-40% 2820 11.5/6.6 0.82 39 25 30 29.0 2p=4 A90ll-4ksr 4.2 5.6 3x400 S6-40% 1250 6.5 0.92 22 39 39.6 26.0 A100lk-4ksr 4.0 5.6 230/400 S6-40% 1350 10.6/6 0.88 22 30 34 31.0 A100lx-4ksr A100lx-4kr 8.0 10.7 230/400 S6-40% 1350 23.4/13.5 0.85 47 70 78 39.0 A100l-4ksr A100l-4ksrs 5.5 7.5 230/400 S6-40% 1350 16/9.3 0.86 35 52 58 35.0 A112m-4ksr 4.8 6.4 400/690 S1 1420 8/4.6 0.86 26 62 73 41.0 The electric motors can also be produced at different basic supply voltages and frequency. Three phase asynchronous electric motor with built-in electric-magnet brake Technical data Type Rated Output Basic Supply Voltage Duty Cycle Parameters at Rated output Starting Characteristics Rated brake (Stopping) torque Rated output of Brake electric Magnet Basic Supply Voltage of brake electric Magnet P1 U S Nn In Cosφ Is Ms Mmax Kw Hp V - Min-1 A - A Nm Nm Nm - - A90lx-2kslb 5.5 7.5 400v/50hz S1 continuous 2800 11.3 0.93 42 38 42 10 50w 98v
C10MS.10 C10MS.12 C13ST.6 C13ST.8 C13MBT.10 C13MBT.12 C13MBT.14 CAPACITY: Centers height mm 370 400 400 Swing over bed mm 730 800 800 Swing over cross slide mm 485 540 540 Swing in gap mm 920 1050 1050 Width of bed mm 520 540 540 Distance between mm 1000, 1500, 2000, 1500, 2000, 3150, 1500, 2000, 3150, centers 3000, 4000 4400, 5000, 6200 4400, 5000, 6200 SPINDLE: Spindle bore mm 260 315 230 290 260 310 356 Spindle nose DIN /11 DIN/12 160 210 350 410 470 HEAD STOCK: No. of spindle speeds 12 24 24 18 18 Spindle speed range rpm 8 - 400 6.3 - 850 6.3 - 670 / 6.3 - 315 Main motor power kW 11 (15) 15 (18.5) 15 (18.5) FEEDS: Number of feeds 76 88 88 Longitudinal feed range mm/rev 0.02 - 7.02 0.13 - 30.72 0.13 - 30.72 Cross feed range mm/rev 0.01 - 3.53 0.04 - 9.216 0.04 - 9.216 THREADS: Number of threads 64 62 62 Metric thread range mm 0.5 - 150 1 - 240 1 - 240 Inch thread range tpi 60 - 13/64 60 1/4 60 1/4 Module thread range Module 0.125 - 37.5 0.5 - 120 0.5 - 120 DP thread range DP 240 - 13/16 120 - 1/2 120 - 1/2 CARRIAGE: Cross slide travel mm 420 420 420 Top slide travel mm 145 200 200 TAIL STOCK: Quill diameter mm 105 110 (120) 110 (120) Quill taper Morse No.6 No.6 No.6 Quill travel mm 200 280 280 NET WEIGHT FOR DBC: 1000 mm Kg 4960 5180 - - 1500 mm Kg 5210 5430 4600 5000 2000 mm Kg 5460 5680 5100 5500 3000 mm (3150 mm) Kg 6300 6520 5700 6100 4000 mm (4400 mm) Kg 6820 7040 6500 6900 5000 mm Kg - 6900 7300 6200 mm Kg - 7900 8300.
Standard Machine Specification LCC 800 LCC 1000 LCC 1250 CAPACITY: Centers height mm 410 510 625 Swing over bed mm 890 1090 1320 Max. turning diameter over guideways for lathes with turret head mm 750 750 1000 Swing over cross slide mm 490 690 940 Swing in gap mm 1050 1250 1500 Width of bed mm 700 Distance between centers mm 1500, 3000, 4000, 5000 Max. turning length in chuck and live center for lathes with turret head mm 1150, 2650, 3650, 4650 MAIN SPINDLE: Spindle bore mm 155 Spindle nose DIN55027 No. 15 Spindle hole internal taper Metric 160 Front bearing diameter mm 200 HEAD STOCK: Spindle speed in two ranges rpm 2 - 250; 8 - 1000 Main motor power kW 30 Spindle max. torque Nm 5000 FEEDS: Longitudinal feeds (Z-axis) M/min 10 (max) Cross feed (X-axis) M/min 10 (max) Rapid traverse (Z-axis and X-axis) M/min 10 (max) Crosslide maximum travel mm 525 525 650 Z-axis feed torque N.m. 26.1 X-axis feed torque N.m. 10 CNC SYSTEM Options HEIDENHAIN, FANUC, SIEMENS, FAGOR TOOLHOLDER TURRET HEAD Tool section mm 40 x 40 Diameter of boring bar mm 40 Turret head position number 8 or 12 TAIL STOCK: Quill diameter mm 125 Quill internal taper Morse No.6 Quill travel mm 250 Tailstock movement Motorized NET WEIGHT DBC 3000 mm Kg 8800 9300 9800
Property PE 100MA PE 130MA PE 160MA PE 200MA Nominal press force: 1000 kN 1300 kN 1600 kN 2000 kN Carriage strokes: 18, 30, 51, 72, 85, 98, 115, 129, 146, 150 (mm) 19, 25, 38, 60, 82, 102, 120, 140, 155, 165 (mm) 20, 28, 43, 60, 77, 94, 117, 131, 149, 167, 180 (mm) 21, 33, 61, 117, 143, 165, 184, 200, 211, 220 (mm) Carriage height regulation: 100 (mm) 100 (mm) 100 (mm) 110 (mm) Maximum number of strokes/min: 65 60 50 45 Distance carriage - table: 400 (mm) 440 (mm) 460 (mm) 520 (mm) C-Frame depth: 330 (mm) 360 (mm) 400 (mm) 420 (mm) Working height of the table: 800 (mm) 800 (mm) 800 (mm) 800 (mm) Distance between the columns: 440 (mm) 490 (mm) 530 (mm) 510 (mm) Bolster plate dimensions: 1100x660x80 (mm) 1200x660x80 (mm) 1300x780x90 (mm) 1400x800x100 (mm) Electrical motor power 7.5 (kW) 11 (kW) 15 (kW) 15 (kW) Power of the auxiliary electrical motor regulating the carriage lifting 0.75 (kW) 0.75 (kW) 0.75 (kW) 0.75 (kW) Machine weight without tools and accessories: 8600 (kg) 9800 (kg) 14000 (kg) 16000 (kg) Power supply/frequency/phase ~ 380 V, 50 Hz, 3f ~ 380 V, 50 Hz, 3f ~ 380 V, 50 Hz, 3f ~ 380 V, 50 Hz, 3f Pneumatic system pressure 5.5 – 6 (bar) 5.5 – 6 (bar) 5.5 – 6 (bar) 5.5 – 6 (bar) Maximum number of clutches per minute 15 (cl/min) 15 (cl/min) 15 (cl/min) 15 (cl/min) Maximum weight of the instrument mounted on the carriage: 180 (kg) 300 (kg) 500 (kg) 500 (kg)
Press is designed for bending of sheet material. * Operational modes: * Single * Free * Impulse * Body: welded and heat treated steel structure * Hydarulic block * Safety mechanical protection * Photo cell of the working area * Mechanical synchronizer * Mechanized rear limiter * Four-profile tool * Visualizer of carriage travel and rear limiter * El.board with pending control panel Technical information Property Pl 100/31 Pl 100/41 Pl 130/31 Pl 130/41 Maximum bending force(kn) 1000 1000 1300 1300 Reverse stroke force (kn) 160 160 210 210 Carriage stroke Minimum ( mm ) 50 50 50 50 Maxmum ( mm ) 180 180 180 180 Distance from the bending axis to the laterals(mm ) 400 400 400 400 Maximum stroke of the rear stop (mm) 500 500 500 500 Main electric motor power(kw ) 7,5 7,5 11 11 Tank capacity (litres) 160 190 160 190 Overal dimensions : Length(mm) 3800 4800 3800 4800 Width(mm) 2000 2000 2000 2000 Height (mm) 2650 2650 2650 2650 Weight (kg) 9800 11500 12000 14000.
Ferrous & non-ferrous metals castings and rolled products, machine parts and equipment, medical equipment, electronics, food-stuffs.
Controller Uhp03smartnet is a 4 channel universal controller. It is intended for solving engineering tasks of average and high difficulty. It contains a wide periphery of inputs/outputs, graphic display and convenient operator interface. Apart from configuration of the device, the controller software also allows the user to record the configuration and test the device. The controller is compatible with scada. Device structure permits development of a console of devices, the number of which depends on the respective application thereof. Overview Analog inputs v 4-adc16b Input signals - pt100, cu53; tc-j, k, s, t; 4 v 20ma 4 regulators v on/off; 3 regulators pid - autotun Proccesindicator Totalizer Digital inputs - 4 Communication rs232/485/422 Protocol - modbus rtu Analogous output v 2 Relay output - 4 (6a/250v) Power suply - 85-265 v ac/dc Realtime clock Compatibility - scada Lcd display monochrome - 128 x 64 Number of operator screens - 9 Config software 96x96x119
Annunciator module Lsb40r is a 39-channel annunciator for technological signalization, intended to draw attention of on-duty operators in command halls in the event of accidents, emergencies or other situations that require their operative intervention. It is compatible with scada. It is applicable for panels at an average distance from the operator and joint management (hardware and software). The tape is suitable for installing in a board or panels/desks. 160x560x60
Oil-country lathes, universal lathes, milling machines, column drilling machines, presses, bending machines, grinding machines, shearers.
Hvac equipment and air cleansing devices.
Bio degrada 15 pieces and 100 pieces bags
Depends on the model Depends on the model
Generators for electricity power: TURBOEX 68 V TECHNICAL DESCRIPTION ; TURBOEX 75 G TECHNICAL DESCRIPTIONS
Electrical.
LED lamps, LED bulbs, LED tubes, LED torch, flashlight, LED task light, LED panels, LED down lights.
Machine tools, cutting tools, wood working machines and tools, electric motors, lifting equipment.
Made of non-toxic materials: PU and ABS. Suitable for all types of surfaces- wet and dry. Orbotwheel goes even on grass! 12 boxes per carton 2,5 kg / per box 26 x 10 x 27 cm/ per box.
The devis is using for diagnostics and therapy of diferent dental disseases, there is a user manual and training work how to work. 240n 250 n 130 mm, 2.5 kg
Ammonium perrhenate, cathode copper.
