Salt, Pure Dried Vacuum Salt, Low Sodium Salt, Salt Tablets, Curing Salt.Warehouse facilities
.Warehousing, customs agency, forwarding, transport
Technical data Type Rated output Basic supply Duty cycle Parameters at rated output starting characteristics weight P1 U S Nn In Cosφ Is Ms Mmax Kw Hp V - Min-1 A - A Nm Nm Kg 2p=2 A90ll-2ksr 5.5 7.5 230/400 S6-40% 2900 15.7/9.1 0.88 23 21 28.4 25.5 A90lx-2ksr 5.5 7.5 230/400 S1 2800 19.6/11.3 0.93 53 30 38 A100lk-2ksr 5.5 7.5 230/400 S6-40% 2820 11.5/6.6 0.82 39 25 30 29.0 2p=4 A90ll-4ksr 4.2 5.6 3x400 S6-40% 1250 6.5 0.92 22 39 39.6 26.0 A100lk-4ksr 4.0 5.6 230/400 S6-40% 1350 10.6/6 0.88 22 30 34 31.0 A100lx-4ksr A100lx-4kr 8.0 10.7 230/400 S6-40% 1350 23.4/13.5 0.85 47 70 78 39.0 A100l-4ksr A100l-4ksrs 5.5 7.5 230/400 S6-40% 1350 16/9.3 0.86 35 52 58 35.0 A112m-4ksr 4.8 6.4 400/690 S1 1420 8/4.6 0.86 26 62 73 41.0 The electric motors can also be produced at different basic supply voltages and frequency. Three phase asynchronous electric motor with built-in electric-magnet brake Technical data Type Rated Output Basic Supply Voltage Duty Cycle Parameters at Rated output Starting Characteristics Rated brake (Stopping) torque Rated output of Brake electric Magnet Basic Supply Voltage of brake electric Magnet P1 U S Nn In Cosφ Is Ms Mmax Kw Hp V - Min-1 A - A Nm Nm Nm - - A90lx-2kslb 5.5 7.5 400v/50hz S1 continuous 2800 11.3 0.93 42 38 42 10 50w 98v
Technical Data K5-320 K5-400 Planer Max. Planer Width mm 320 400 Work Table Length mm 1560 1920 Max. Planing Thickness mm 4 4 Cutter Shaft Speed R/min 5200 5200 Number Of Cutters 3 3 Cutter Shaft Dia. mm 86 86 El. Motor Power kW 2.2 3 Thicknesser Max. Planer Width mm 320 400 Work Table Length mm 550 690 Max. Planing Thickness mm 180 220 Max. Planing Heigh mm 3 3 Cutter Shaft Speed R/min 5200 5200 Number Of Cutters 3 3 Feeds m/min 8 8 El. Motor Power kW 2.2 3 Boring Device Table Dimensions mm 400/250 (500) 400/250 (500) Longitudinal Travel mm 100 (150) 100 (150) Cross Travel mm 100 (150) 100 (150) Vertical Travel mm 100 (150) 100 (150) Max. Drill Dia. mm 16 16 Drill Speed R/min 5200 5200 Spindel Moulder Spindle Diameter mm 30 (50) 30 (50) Spindle Speed R/min. 6000 6000 Vertical Stroke of Spindle mm 130 130 Max.Ttool Diameter mm 170 170 Dimensions Of Worktable mm 850 / 450 850 / 450 El. Motor Power kW 2.2 2.2 Circular Saw Saw Blade Diameter mm 300 300 Saw Blade Speed R/min. 3700 3700 Max. Depth Of Cut mm 85 85 Dimensions Of Worktable mm 850 / 450 850 / 450 Spindle Dia. mm 30 30 El. Motor Power kW 2.2 2.2 or 3 Tenoning carriage Dimensions of worktable mm 450/750 450/750 Machine dimensions Net weight of the machine Kg 540 580 Length mm 1600 2000 Width mm 1140 1700 Height mm 1000 1100
Technical data OL 220 DG OL 222 DG OL 220 DGH OL 220 DGA Type Saw-frame rotation range – left/right Manual 45° - 30° Manual 45° - 30° Semi-automatic 45° - 30° Automatic 45° - 30° Maximum cut off stock Cutting at angle 90° mm 240 240 240 240 mm 220 220 220 220 mm 275x200 275x200 275x200 250x200 Cutting at angle 45° mm 200 200 200 200 mm 175 175 175 175 mm 190x120 190x120 190x120 190x120 Cutting at angle 30° mm 130 130 130 130 mm 125 125 125 125 mm 130x80 130x80 130x180 130x80 Material level mm 960 960 960 950 Minimum rest in automatic mode mm x x x 380 Sawing speed m/min 30 / 60 30 / 60 30 / 60 (15 – 70) 30 / 60 (15 – 70) Saw blade dimensions mm 2940x27x0.9 2940x27x0.9 2940x27x0.9 2940x27x0.9 Stock feeding: single mm x x x 500 repeatedly mm x x x 1000 Power of: main motor kW 1.1 / 1.5 1.1 / 1.5 1.1 / 1.5 (2.2) 1.1 / 1.5 (2.2) cooling motor kW 0.18 0.18 0.18 0.18 hydraulic motor kW x x 0.25 0.75 brush kW x x x 0.09 Capacity of: hydraulic l 1.5 1.5 6 15 cooling l 15 15 15 15 Overall dimensions (LxWxH): mm 1500x800x1600 1500x800x1600 1500x800x1600 1500x2400x1600 Net weight kg 475 475 500 1200
PRODUCT - Diesel D6 Virgin Low Sulphur FO CIF Price - Gross US$ 0.90 / Net US$ 0.88 FOB Price - Gross US$ 0.79 / Net US$ 0.77 Units - US Barrels Monthly Quantity Restrictions: Minimum - 5 000 000 / 50 000 000 Maximum SELLERâ??S APPROVED FOB ROTTERDAM TRANSACTION PROCEDURE TANK TO TANK 1. Buyer issues ICPO, and company registration certificate, data page of Buyerâ??s Passport, and TSA. 2. Seller issues Commercial Invoice (CI) & Warning Letter to Buyer, Buyer signs CI and Warning Letter and returns back to Seller. Seller provides the below documents to Buyer: a) Company Registration Certificate, b) Product Quality Passport (Dip Test Result), c) Statement of Product Availability, and d) Certificate of Origin of the Product. 3. Seller logistics team verify Buyerâ??s provided tank farm and upon approval. Buyer shall FIRST pay for 2 days to their Tank Farm Company before the Seller pays for 3 days tank farm lease. Both parties showing proof of readiness for activation of the GPS Coordinate-Tank storage receipt (TSR) and fuel transmission program before Injection will proceed accordingly. 4. Seller issues following POP documents to Buyer: a) Injection report, b) Dip test authorization letter (DTA) â?? Unconditional, c) Authorization to Sell, d) Fresh SGS Report or equivalent, and e) Authorization to verify the product in Seller's tank (ATV). 5. Buyer conducts Dip test on the product and makes the payment for the total value of product injected into the tanks through the means of MT103- TT wire transfer. 6. Seller pays all Seller intermediaries involved in the transaction in accordance with the NCNDA/IMFPA. 7. Subsequently monthly shipment continues as per terms and conditions of the Commercial Invoice and extension of transaction by Seller issuing 12 months contract to Buyer for proceeding.
PRODUCT Jet Fuel A - 1 CIF Price - Gross US$ 84 / Net US$ 82 FOB Price - Gross US$ 78 / Net US$ 76 Units - US Barrels Monthly Quantity Restrictions: Minimum - 2 000 000 / 6 000 000 Maximum SELLERâ??S APPROVED FOB ROTTERDAM TRANSACTION PROCEDURE TANK TO TANK 1. Buyer issues ICPO, and company registration certificate, data page of Buyerâ??s Passport, and TSA. 2. Seller issues Commercial Invoice (CI) & Warning Letter to Buyer, Buyer signs CI and Warning Letter and returns back to Seller. Seller provides the below documents to Buyer: a) Company Registration Certificate, b) Product Quality Passport (Dip Test Result), c) Statement of Product Availability, and d) Certificate of Origin of the Product. 3. Seller logistics team verify Buyerâ??s provided tank farm and upon approval. Buyer shall FIRST pay for 2 days to their Tank Farm Company before the Seller pays for 3 days tank farm lease. Both parties showing proof of readiness for activation of the GPS Coordinate-Tank storage receipt (TSR) and fuel transmission program before Injection will proceed accordingly. 4. Seller issues following POP documents to Buyer: a) Injection report, b) Dip test authorization letter (DTA) â?? Unconditional, c) Authorization to Sell, d) Fresh SGS Report or equivalent, and e) Authorization to verify the product in Seller's tank (ATV). 5. Buyer conducts Dip test on the product and makes the payment for the total value of product injected into the tanks through the means of MT103- TT wire transfer. 6. Seller pays all Seller intermediaries involved in the transaction in accordance with the NCNDA/IMFPA. 7. Subsequently monthly shipment continues as per terms and conditions of the Commercial Invoice and extension of transaction by Seller issuing 12 months contract to Buyer for proceeding.
PRODUCT EN590 - STANDARD 10 ppm CIF Price - Gross US$ 535 / Net US$ 525 FOB Price - Gross US$ 475 / Net US$ 465 Units - Metric Tons Monthly Quantity Restrictions: Minimum - 50,000 / Maximum 500,000 SELLERâ??S APPROVED FOB ROTTERDAM TRANSACTION PROCEDURE TANK TO TANK 1. Buyer issues ICPO, and company registration certificate, data page of Buyerâ??s Passport, and TSA. 2. Seller issues Commercial Invoice (CI) & Warning Letter to Buyer, Buyer signs CI and Warning Letter and returns back to Seller. Seller provides the below documents to Buyer: a) Company Registration Certificate, b) Product Quality Passport (Dip Test Result), c) Statement of Product Availability, and d) Certificate of Origin of the Product. 3. Seller logistics team verify Buyerâ??s provided tank farm and upon approval. Buyer shall FIRST pay for 2 days to their Tank Farm Company before the Seller pays for 3 days tank farm lease. Both parties showing proof of readiness for activation of the GPS Coordinate-Tank storage receipt (TSR) and fuel transmission program before Injection will proceed accordingly. 4. Seller issues following POP documents to Buyer: a) Injection report, b) Dip test authorization letter (DTA) â?? Unconditional, c) Authorization to Sell, d) Fresh SGS Report or equivalent, and e) Authorization to verify the product in Seller's tank (ATV). 5. Buyer conducts Dip test on the product and makes the payment for the total value of product injected into the tanks through the means of MT103- TT wire transfer. 6. Seller pays all Seller intermediaries involved in the transaction in accordance with the NCNDA/IMFPA. 7. Subsequently monthly shipment continues as per terms and conditions of the Commercial Invoice and extension of transaction by Seller issuing 12 months contract to Buyer for proceeding.
