Mouthwash & Mouth Spray Made up from 100% natural rose water from Damascene rose, saffron and xylitol from white birch. The mouthwash has antibacterial and anti-inflammatory effects. Its properties soften the mucous membrane in the oral cavity, relieve the symptoms of red throat and inflamation of the gums. Daily use helps to freshen the breath and prevents plaque build- up and caries formation. Dental specialists recommend the daily use of mouthwash to maintain high oral hygiene. It is assumed that including mouthwash in your routine may reduce the risk of caries by up to 80%. How Rose Damascena mouthwash can enhance your oral health? Rose water Rosewater is known for its countless benefits for human health. Used in mouthwash, it relieves the inflammation of gums, helps prevent and treat periodontitis. Its frequent use enhances the health of your teeth and gum so you can keep your oral health under control. Saffron Saffron contains many vitamins, minerals, and nutrients, which come with many health benefits. It has anti-bacterial properties that reduce the risk of dental problems such as cavities, dental plaque, gingivitis, etc. In addition, it has an interesting natural sweet aroma with a hint of mint which helps to reduce bad breath Xylitol from white birch Xylitol from white birch is a type of multimodal sugar alcohol and is a natural product. It supports cavity prevention and is very effective against inflammatory processes in the oral cavity.
Lavender has been a favorite herb for centuries. The historic use and recognition of lavender is almost as old the history of man. As an herb, lavender has been in documented use for over 2,500 years. In ancient times lavender was used for mummification and perfume by the Egyptian's, Phoenicians, and peoples of Arabia. The Greeks and the romans bathed in lavender scented water and it was from the Latin word "lavo" meaning "to wash" that the herb took it's name. Perhaps first domesticated by the Arabians, lavender spread across Europe from Greece.
Toys, Consumer Electronics, It, Sda, Personal Care Electronics, Toys.
Incredibly soft and tender hand soap specifically formulated to fight bacteria. Effectively cleanses the hands while leaving the skin beautiful, soft, and with the lingering fragrance of roses. Volume: 500 mL.
Romanov Cosmetics Floral Magic Premium Hand Liquid Soap gives your hands the irresistible fragrance of flower foliage. Treat your hands to the lavish pampering you deserve with a luxurious lather and an indulgent, refreshing scent. Wash away dirt and bacteria with our Floral Magic liquid hand soap gentle cleansing formula. Volume: 500 mL/1000mL.
C10MS.10 C10MS.12 C13ST.6 C13ST.8 C13MBT.10 C13MBT.12 C13MBT.14 CAPACITY: Centers height mm 370 400 400 Swing over bed mm 730 800 800 Swing over cross slide mm 485 540 540 Swing in gap mm 920 1050 1050 Width of bed mm 520 540 540 Distance between mm 1000, 1500, 2000, 1500, 2000, 3150, 1500, 2000, 3150, centers 3000, 4000 4400, 5000, 6200 4400, 5000, 6200 SPINDLE: Spindle bore mm 260 315 230 290 260 310 356 Spindle nose DIN /11 DIN/12 160 210 350 410 470 HEAD STOCK: No. of spindle speeds 12 24 24 18 18 Spindle speed range rpm 8 - 400 6.3 - 850 6.3 - 670 / 6.3 - 315 Main motor power kW 11 (15) 15 (18.5) 15 (18.5) FEEDS: Number of feeds 76 88 88 Longitudinal feed range mm/rev 0.02 - 7.02 0.13 - 30.72 0.13 - 30.72 Cross feed range mm/rev 0.01 - 3.53 0.04 - 9.216 0.04 - 9.216 THREADS: Number of threads 64 62 62 Metric thread range mm 0.5 - 150 1 - 240 1 - 240 Inch thread range tpi 60 - 13/64 60 1/4 60 1/4 Module thread range Module 0.125 - 37.5 0.5 - 120 0.5 - 120 DP thread range DP 240 - 13/16 120 - 1/2 120 - 1/2 CARRIAGE: Cross slide travel mm 420 420 420 Top slide travel mm 145 200 200 TAIL STOCK: Quill diameter mm 105 110 (120) 110 (120) Quill taper Morse No.6 No.6 No.6 Quill travel mm 200 280 280 NET WEIGHT FOR DBC: 1000 mm Kg 4960 5180 - - 1500 mm Kg 5210 5430 4600 5000 2000 mm Kg 5460 5680 5100 5500 3000 mm (3150 mm) Kg 6300 6520 5700 6100 4000 mm (4400 mm) Kg 6820 7040 6500 6900 5000 mm Kg - 6900 7300 6200 mm Kg - 7900 8300.
Standard Machine Specification LCC 800 LCC 1000 LCC 1250 CAPACITY: Centers height mm 410 510 625 Swing over bed mm 890 1090 1320 Max. turning diameter over guideways for lathes with turret head mm 750 750 1000 Swing over cross slide mm 490 690 940 Swing in gap mm 1050 1250 1500 Width of bed mm 700 Distance between centers mm 1500, 3000, 4000, 5000 Max. turning length in chuck and live center for lathes with turret head mm 1150, 2650, 3650, 4650 MAIN SPINDLE: Spindle bore mm 155 Spindle nose DIN55027 No. 15 Spindle hole internal taper Metric 160 Front bearing diameter mm 200 HEAD STOCK: Spindle speed in two ranges rpm 2 - 250; 8 - 1000 Main motor power kW 30 Spindle max. torque Nm 5000 FEEDS: Longitudinal feeds (Z-axis) M/min 10 (max) Cross feed (X-axis) M/min 10 (max) Rapid traverse (Z-axis and X-axis) M/min 10 (max) Crosslide maximum travel mm 525 525 650 Z-axis feed torque N.m. 26.1 X-axis feed torque N.m. 10 CNC SYSTEM Options HEIDENHAIN, FANUC, SIEMENS, FAGOR TOOLHOLDER TURRET HEAD Tool section mm 40 x 40 Diameter of boring bar mm 40 Turret head position number 8 or 12 TAIL STOCK: Quill diameter mm 125 Quill internal taper Morse No.6 Quill travel mm 250 Tailstock movement Motorized NET WEIGHT DBC 3000 mm Kg 8800 9300 9800
Property PE 100MA PE 130MA PE 160MA PE 200MA Nominal press force: 1000 kN 1300 kN 1600 kN 2000 kN Carriage strokes: 18, 30, 51, 72, 85, 98, 115, 129, 146, 150 (mm) 19, 25, 38, 60, 82, 102, 120, 140, 155, 165 (mm) 20, 28, 43, 60, 77, 94, 117, 131, 149, 167, 180 (mm) 21, 33, 61, 117, 143, 165, 184, 200, 211, 220 (mm) Carriage height regulation: 100 (mm) 100 (mm) 100 (mm) 110 (mm) Maximum number of strokes/min: 65 60 50 45 Distance carriage - table: 400 (mm) 440 (mm) 460 (mm) 520 (mm) C-Frame depth: 330 (mm) 360 (mm) 400 (mm) 420 (mm) Working height of the table: 800 (mm) 800 (mm) 800 (mm) 800 (mm) Distance between the columns: 440 (mm) 490 (mm) 530 (mm) 510 (mm) Bolster plate dimensions: 1100x660x80 (mm) 1200x660x80 (mm) 1300x780x90 (mm) 1400x800x100 (mm) Electrical motor power 7.5 (kW) 11 (kW) 15 (kW) 15 (kW) Power of the auxiliary electrical motor regulating the carriage lifting 0.75 (kW) 0.75 (kW) 0.75 (kW) 0.75 (kW) Machine weight without tools and accessories: 8600 (kg) 9800 (kg) 14000 (kg) 16000 (kg) Power supply/frequency/phase ~ 380 V, 50 Hz, 3f ~ 380 V, 50 Hz, 3f ~ 380 V, 50 Hz, 3f ~ 380 V, 50 Hz, 3f Pneumatic system pressure 5.5 – 6 (bar) 5.5 – 6 (bar) 5.5 – 6 (bar) 5.5 – 6 (bar) Maximum number of clutches per minute 15 (cl/min) 15 (cl/min) 15 (cl/min) 15 (cl/min) Maximum weight of the instrument mounted on the carriage: 180 (kg) 300 (kg) 500 (kg) 500 (kg)
Press is designed for bending of sheet material. * Operational modes: * Single * Free * Impulse * Body: welded and heat treated steel structure * Hydarulic block * Safety mechanical protection * Photo cell of the working area * Mechanical synchronizer * Mechanized rear limiter * Four-profile tool * Visualizer of carriage travel and rear limiter * El.board with pending control panel Technical information Property Pl 100/31 Pl 100/41 Pl 130/31 Pl 130/41 Maximum bending force(kn) 1000 1000 1300 1300 Reverse stroke force (kn) 160 160 210 210 Carriage stroke Minimum ( mm ) 50 50 50 50 Maxmum ( mm ) 180 180 180 180 Distance from the bending axis to the laterals(mm ) 400 400 400 400 Maximum stroke of the rear stop (mm) 500 500 500 500 Main electric motor power(kw ) 7,5 7,5 11 11 Tank capacity (litres) 160 190 160 190 Overal dimensions : Length(mm) 3800 4800 3800 4800 Width(mm) 2000 2000 2000 2000 Height (mm) 2650 2650 2650 2650 Weight (kg) 9800 11500 12000 14000.
Nominal effort: 1250 t Max. workpiece diameter: 140 mm Max. upset flange diameter: 180 mm Stroke of moving slider: 220 mm Stroke of upsetting slider: total/working - 460/310 mm Strokes per min: 30 Matrix dimensions: 700x260x820 (LxWxH) Distance upsetting slider and matrixes: 180 mm Machine overall dimensions: 6400x4365x3340 mm Weight: 135 t
Hand sanitizer gel, hand disinfectant, hand sanitiser.
Vending machines.
Washing powder The company make detergents w any techical specifications depend from wish of costumer on very atractive prices. On agreement
Power tools, angle grinders, grinders, drills, rotary hammers, demolition hammers, jig saws, drywall screwdrivers, cordless tools.
Antibacterial gel, face cream, hand cream, cosmetic for body and face. organic cosmetic with pattented formula of collagen.
Technical characteristics FU 251M FU 301 FU 321M FU 361 FU 401 Table size mm 250x1120 300x1250 320x1350 360x1500 400x1600 “T” slots – number x size mm 3x14 5x14 5x18 5x18 5x18 Table swivel – left and right (º) 45 45 45 45 45 Longitudinal table travel - manual mm 820 950 1000 (1250)* 1150 (1250)* 1250 - automatic mm 800 930 980 (1230)* 1130 (1230)* 1230 Cross table travel - manual mm 280 320 360 360 360 - automatic mm 260 300 340 340 340 Vertical table travel - manual mm 410 410 460 460 460 - automatic mm 390 390 440 440 440 Max. Distance from table top to spindle axis mm 440 440 490 490 490 Spindle nose taper ISO 40 40 50 50 50 Number of spindle speeds 18 18 18 18 18 Spindle speed range rpm 40-2000 (50-2500)* 40-2000 (50-2500)* 32-1600 (40-2000)* 32-1600 (40-2000)* 32-1600 (40-2000)* Number of table feeds 18 18 18 18 18 Table feed rate - x,y mm/min 12.5-630 (16-800)* (20-1000)** 12.5-630 (16-800)* (20-1000)** 12.5-630 (16-800)* (20-1000)** 12.5-630 (16-800)* (20-1000)** 12.5-630 (16-800)* (20-1000)** - z mm/min 5-262 (7-334)* (8-415)** 5-262 (7-334)* (8-415)** 5-262 (7-334)* (8-415)** 5-262 (7-334)* (8-415)** 5-262 (7-334)* (8-415)** Table rapide traverse mm/min 2500/1040 2500/1040 2500/1040 2500/1040 2500/1040 Main motor power kW 4 5.5 7.5 7.5 7.5 Feed motor power kW 1.5 1.5 2.2 2.2 2.2 Machine weight kg 1975 2025 2850 2900 2925 * - option Note: All the milling machines could be manufactured with control of the movement of the axes by joystick, and frequency adjustment of the feeds
Packaging machine equiped with a multihead weigher. 2000(W)*3500(H)*2000(L).
Ferrous & non-ferrous metals castings and rolled products, machine parts and equipment, medical equipment, electronics, food-stuffs.
Oil-country lathes, universal lathes, milling machines, column drilling machines, presses, bending machines, grinding machines, shearers.
Cnc Machined Parts.
