Product application Areas :
General Engineering and Ammunition
Characteristics :
A Copper and Zinc Alloy containing small amount of Arsenic. This is added as an inhibitor against dezincification. The alloy exhibits a good combination of strength and ductility and is commonly selected whenever excellent cold working properties, bright finish and relatively low cost are desirable. Severe environment must be considered to predict corrosion behaviour. The alloy is often used for variety of deep drawn components.
Product application Areas :
Furniture and Architectural Grill Work
Characteristics :
A Copper and Zinc Alloy containing small amount of Arsenic. This is added as an inhibitor against dezincification. The alloy exhibits a good combination of strength and ductility and is commonly selected whenever excellent cold working properties, bright finish and relatively low cost are desirable. Severe environment must be considered to predict corrosion behaviour. The alloy is often used for variety of deep drawn components.
Characteristics :
A Copper and Zinc Alloy containing small amount of Arsenic. This is added as an inhibitor against dezincification. The alloy exhibits a good combination of strength and ductility and is commonly selected whenever excellent cold working properties, bright finish and relatively low cost are desirable. Severe environment must be considered to predict corrosion behaviour. The alloy is often used for variety of deep drawn components.
Product Application Area : Power Plants, Desalination Plants, Ship Building & Ship Repair, Heat Exchangers and Radiators, Refineries, Offshore Oil rigs, Condensers, Evaporators, Ferrules and Distillers.
Characteristics : A Copper Zinc Alloy containing Aluminium and small amount of Arsenic which is added as an inhibitor against dezincification. Inhibited Aluminium Brass resists the action of high velocity salt and brackish water and is commonly used for condenser tube. The outstanding characteristic of Aluminium Brass is the high resistance to impingement attack. Tubes of this alloy are recommended for use in marine and land power stations where cooling water velocities are high and where inhibited admiralty brass has failed from impingement. Guide to the selection of tube material: Sea Water: a. Dissolved salts more than 2000 ppm.b. Suspended solids more than 30 ppm.c. H2S or Ammonia is less that 1 ppm.Permissible average velocity of water 2.0 - 2.5 metres/sec.
Product application Areas :
Hand Pumps, Bore Hole Tubes. bo
Characteristics :
A Copper and Zinc Alloy containing small amount of Arsenic. This is added as an inhibitor against dezincification. The alloy exhibits a good combination of strength and ductility and is commonly selected whenever excellent cold working properties, bright finish and relatively low cost are desirable. Severe environment must be considered to predict corrosion behaviour. The alloy is often used for variety of deep drawn components.
Our company PDY Metal Recycling, is a Philippine based ferrous and non ferrous scrap supplier. We are direct from collecting, marketing, packing and trucking.
We are looking for a serious and honest buyer to have a long and lasting business relationship.
Description: Scrap Brass Ebony
Origin: Any port of philippiens
Packing: Palletized, Jumbo Bags or Loose in 20 ft container.
Destination: Any port in asia pacific Region ( other port please inquire)
Payment Terms: 20 % advance deposit or irrevocable l/c at sight
Direct buyer preferred and agents also welcome.
Please include your required port of discharge, indicative price. Direct e-mail and
We are manufacturer of all types of brass parts like brass fastener, brass banjo tee, brass banjo bolt, brass hydraulic parts, brass pipe fitting parts, union tee, elbow female, brass hose parts, brass female strainer with plug, forging plug, brass pneumatic parts, brass fasteners, brass neutral links etc. We also accept the drawing of the customer and according to that drawing, we developed their product. We are making and we can make any damn parts from drawing or sample. Bon engineers is manufacturer and exporter of brass parts through the decades. Consistency in achieving quality and customers satisfaction through grand aim, vision and mission of our mentor led us in forming bon engineers. We manufacture brass parts in sectors such as electrical parts, sanitary parts, pneumatic parts, lock parts, electronic parts, fasteners, lpg parts, tarnsformer parts, plastic moulding inserts, engineering parts, hose fittings, auto parts, precision brass parts / components as per drawing & sample specifications.
We are a manufacturer of all types of brass parts like brass fastener, brass banjo tee, brass banjo bolt, brass hydraulic parts, brass pipe fitting parts, union tee, elbow female, brass hose parts, brass female strainer with plug, forging plug, brass pneumatic parts, brass fasteners, brass neutral links etc. We also accept the drawing of the customer and according to that drawing, we developed their product. We are making and we can make any damn parts from drawing or sample.
We are manufacturer of all types of brass parts like brass pipe fitting parts, union tee, elbow female, brass hose parts, brass female strainer with plug, forging plug, brass pneumatic parts, brass fasteners, brass neutral links etc. We also accept the drawing of the customer and according to that drawing, we developed their product. We are making and we can make any damn parts from drawing or sample.
We are manufacturer of all types of brass parts like brass pipe fitting parts, union tee, elbow female, brass hose parts, brass female strainer with plug, forging plug, brass pneumatic parts, brass fasteners, brass neutral links etc. We also accept the drawing of the customer and according to that drawing, we developed their product. We are making and we can make any damn parts from drawing or sample.
Size :,½, to 4,
Thread,:,Metric, BSP, BSPT, NPT, NPTF etc.
Material,:,All inserts available in any special grade as per customer requirement.
Finish,:,Natural, chrome or any finishing as per customer requirement.
Size :,½, to 4,
Thread,:,Metric, BSP, BSPT, NPT, NPTF etc.
Material,:,All inserts available in any special grade as per customer requirement.
Finish,:,Natural, chrome or any finishing as per customer requirement.
Ajanta engineering works are manufacturing and
Supply high precision brass, copper componets and
Other metal components likes
Precision turned components
Brass mail-female, bushes,
Brass- reducer- flange,
Brass forging parts, brass fitting,
Brass hose nipples,
Brass flair parts, brass pins,
Brass sanitary parts, brass fasteners,
Brass molding inserts,
Brass fitting, knurled inserts,
Brass auto parts, brass gas parts
Brass electronics and electric parts,
Brass sheet metal components
Other metals components as per samples or drowing.
The company also manufacturing all type of
Straightening machine for 1 mm to 100 mm capacity
For all material
Producing high quality turned parts since 1991
Here at Ajita, quality counts. It’s important to us that we get your part manufactured when you need it and how you need it!
We produce a variety of products and components including sub-assemblies on a range of machinery, utilising the latest CNC machinery.
In addition, our Inspection Department has a comprehensive stock of gauges, clocks and micrometers, together with optical comparators. In many instances we work closely with our customers during the design stage of their product, to ensure that the most economical component is produced with respect to shape & standard material.
Please get in touch and discuss your requirements with us.
Ajita Metals offer Brass Turned Components for Various Applications.
Classification:
Automobile Sector
Electrical Sector
Electronic Sector
Tele Communication Sector
Instrumentation Sector
Moulding Industries
Sensor Industries
Valves & Water Industries
Lighting Systems
Material:
Free Cutting Brass IS 319 Types I or BS 249 Types I
Any Special Non Ferrous Material Grade
Brass as per RoHS Directive
Thread:
ISO Metric (MM Threads)
BA, BSW (Inches), UNC, UNF, BSP, NPT, BSPT
Any as per customize Specification
Size:
Circumference Diameter 1MM to 200MM with length of any size.
Apart from standard Precision Turned Components, we develop customize Precision Turned Components as per technical drawing or other relevant data.
Finish:
Natural
Nickle Plated
Silver Plated
Tin Plated
As per customer Specification
Any Kind of Metal Turned Parts Can be Developed As Per Customers Specifications.
Ajita forge is one of the few green forging companies in india, with majority of its power produced by renewable resources.
Over the years Ajita Forge has created world-class capacities and capabilities.
Our forging facilities consists of fully automated forgings press lines ranging from 50T to 1000T.
All forging press lines are highly flexible, which gives the company the inherent advantage to simultaneously meet different customer demands and optimize production .
This allows Ajita Forge to meet the growing demands of its customers continuously.
We provide various types of Brass Forged Components; those are used in the Agricultural equipment, Automotive Parts, Water & Valve Fittings,Gas & Hydraulic fittings, Electrical & Engineering Industries Etc.
Range:
From 0.05 Kg to 5.00 Kg
Material:
? Forging Brass As Per BS 218
? Any Special Brass Material Composition as per customers requirement
Platting:
? Natural, Nickel Plated and special plating as per customer requirement.
Why use Forging ?
? The forging process can create parts that are stronger than those manufactured by other metalworking process. This is why forging are almost always used where reliability and human safety are critical. And some special industry must required forged part for better reliability & safety
Any kind of brass forged components can be developed as per customer’s specification & design
Ajita metals offers a wide variety of brass fittings for globally recognized piping & tubing systems. The breadth and depth of our brass fitting lines are unmatched by any single competitor from india. Manufactured using high quality material, these products are widely appreciated for their superior quality, easy usage, dimensional accuracy, low maintenance, high performance and long life span. Designed as per the requisite norms of the industry
We are engaged in offering our clients with following brass components:
Material offered: copper alloys such as free cutting brass, dzr, lead free brass, forging grade, bronze, special alloyed brass in various compositions.
Our range of products is highly demanded in the following industries:
• plumbing and sanitary
• piping & tubing
• hvac & refrigeration
• construction & infrastructure
• automobile
• railways
• aerospace
• defence
• hydraulics
• instrumentation
• lpg, cng & petroleum
• oil and gas
Inspection & quality control
We have quality control department, which ensures that each product manufactured as exactly to the print and each process are controlled and the quality of the parts maintained throughout the entire process. We follow rigorous controls like material control, process control, machining and dimensional control, assembly line quality control, leakage / pressure testing along with supplementary tests to ensure that our range is free from all kinds of defects. Due to our ethical business policies, we have been able to serve our esteemed clients, located across the globe. We provide inspection reports to our customers, if required. For more information on quality
Blow pipe mixing cutter
Body: forged brass material
Head: forged brass material
Weight of cutter: 1.600 kg. Lower fatigue to operator due to its light weight
Oxygen & fuel gas tube: use two pipe extruded brass tube specified material ensure highly resistant and longer life
Control knob: brass extruded spindle are use in control knob for longer life
Gasco cutting blow pipe available in different length like 520mm, 750mm and as per customer requirement
