Specification Value Test Method Penetration @25°C 90-130 ASTM D-5 Specific Gravity @ 25°C 1.01-1.06 ASTM D-70 Softening Point °C 40-45 ASTM D-36 Flash Point °C 200 min ASTM D-92 Ductility @25°C 100 min ASTM D-113 Loss on Heating %wt. 0.5 Max ASTM D-6 Drop in Pen. After Heating % 20 Max ASTM D-6 & D-5 Solubility in TCE %wt. 99.5 min ASTM D-4 Spot Test Negative A.A.S.H.T.O.T 102 Road Bitumen 90/130 issued for construction and repair of road surfaces, designed for various types of road application such as hot asphalt and bituminous mixtures, recommended for regions with temperate climates
Specification Value Test Method Penetration @25°C 80 IS 203 Absolute Viscosity @60°C, Poises 800-1200 IS 1206 Kinematic Viscosity @60°C, Poises 250 IS 1206 Softening Point °C 40 IS 1205 Flash Point °C 220 IS 1448 Solubility in CS2 %wt. 99.0 IS 1216 Test on residue from rolling thin film oven test Viscosity Ratio @60°C 4 IS 1206 Ductility @25°C 75 IS 1208 VG-10 is widely used in spraying applications such as surface-dressing and paving in very cold climate in lieu of old 85/100 Penetration grade. It is also used to manufacture Bitumen Emulsion and Modified Bitumen products
Specification Value Test Method Penetration @25°C 45 IS 203 Absolute Viscosity @60°C, Poises 2400-3600 IS 1206 Kinematic Viscosity @60°C, Poises 350 IS 1206 Softening Point °C 47 IS 1205 Flash Point °C 220 IS 1448 Solubility in CS2 %wt. 99.0 IS 1216 Test on residue from rolling thin film oven test Viscosity Ratio @60°C 4 IS 1206 Ductility @25°C 40 IS 1208 VG-30 is primarily used to construct extra heavy duty Bitumen pavements that need to endure substantial traffic loads. It can be used in lieu of old 60/70 Penetration grade
Specification Value Test Method Penetration @25°C 10-20 ASTM D-5 Specific Gravity @25°C 1.01-1.06 ASTM D-70 Softening Point °C 85-95 ASTM D-36 Flash Point °C 225 min ASTM D-92 Ductility @25°C 5 min ASTM D-113 Loss on Heating %wt. 0.2 Max ASTM D-6 Drop in Pen. After Heating % 20 Max ASTM D-6 & D-5 Solubility in TCE %wt. 99.5 min ASTM D-4 Spot Test Negative A.A.S.H.T.O.T 102 This grade has a wide variety of industrial applications roof felts. Waterproofing for roof & floors, anti-rust pipe coating, anti-slip layer compound for poling, sound dampening felts, under carriage sealant and coats in the auto motives, electrical cable joint protection and etc.
Specification Value Test Method Penetration @25°C 160-220 ASTM D-5 Specific Gravity @ 25°C 1.01-1.06 ASTM D-70 Softening Point °C 35-43 ASTM D-36 Flash Point °C 250 min ASTM D-92 Ductility @25°C 100 min ASTM D-113 Loss on Heating %wt. 0.2 Max ASTM D-6 Drop in Pen. After Heating % 20 Max ASTM D-6 & D-5 Solubility in TCE %wt. 99.5 min ASTM D-4 Spot Test Negative A.A.S.H.T.O.T 102 Road bitumen 160/220 is a product produced in the process of oxidization of a vacuum residue obtained from the distillation of crude oil. Bitumen 160/220 is used for production of the bitumen emulsions, as a raw material for insulating materials industry, for repairing technologies of damaged road surfaces
The terms bitumen and asphalt are mostly interchangeable, except where asphalt is used as an abbreviation for asphalt concrete. This article uses "asphalt/bitumen" where either term is acceptable.
Bitimen Bitumen
Origin: Kazakhstan, Georgia, Malaysia Incoterms: CIF/FOB Loading Port: Rotterdam and Houston etc Payment Terms: MT103 TTWIRE Performance Bond: 2% PB Contract Term: SPOT 6-12 Month Minimum (With Rolls and Extension Inspection: SGS CIQ or Similar Bitumen Minimum Quantity: 50,000 MT per month Price CIF/ASWP: Gross USD $425.00 MT / USD $415.00 MT NET TRANSACTION WORKING PROCEDURE FOB Rotterdam/Houston 1. Buyer sends Company Profile along with ICPO, Tank Storage Agreement (TSA) and data page of buyers passport 2. Seller Issues commercial invoice (CI), Buer signs and returns commercial invoice back to seller. 3. Seller verify buyer TSA by Letter and Seller issues the following POP documents to buyer: a)Statement of Product Availability b)Commitment Letter of Supply c)Unconditional Dip Test Authorization (UDTA) d)Authorization to Sell and Collect (ATSC) e)Authorization to verify the product in Seller''s tank (ATV) f) Fresh SGS not older than 72 hours 4. NCNDA/IMFPA will be signed among all parties involved. 5. Buyer options conduct DIP TEST on the product and make the payment for the total value of product injected into the tanks through the means of mT103-TT 6. Seller pays commission to all intermediaries involved in the transaction and subsequently monthly shipment continues as per terms and conditions of the commercial invoices and extension of transaction by issuing 12 months contract to buyer for proceeding. STAND TRANSACTION CIF PROCEDURES 1. Seller confirms ICPO + passport of buyer and issues FCO for signing 2. Seller issues contract for amendment and countersigning as per mutual agreement. 3. Seller legalizes and register contract at seller expense and send to buyer as final approved, registered and legalized contract 4. Seller sends to buyer via e-mail, the following POP documents in buyer''s name for verification of the allocation: A. Statement of product availability B. Refinery commentment to supply C. Company profile D. MSDS E. Company license to export 5. Buyer and Seller sign the CPA with the secured shipping company for documentation along with the NCNDA and IMFPA for commission construction
seller Bitumen 40/50 (This grade is harder, with a penetration between 40 and 50 dmms, suitable for road construction in warmer climates) seller Bitumen 60/70 (This is a medium penetration grade, indicating slightly softer bitumen, ideal for moderate climates) seller Bitumen 80/100 (This grade is softer, with a penetration between 80 and 100 dmms, used in colder climates for better flexibility)
we know commonly Bitumen Penetration as penetration grade bitumen. Firstly, It is a standard form of bitumen that we graded based on its hardness level. Secondly, we determine this grading through a penetration test. And Which we measures the depth a standard needle penetrates the bitumen under specific conditions. In conclusion The penetration value of bitumen is crucial as it indicates its suitability for various road construction applications, for instance.
The production of penetration grade bitumen involves a series of steps: Distillation: However, Crude oil is initially distilled in a refinery to separate the lighter fractions from the heavier ones. And It resulting in raw bitumen. Refining: In addition The raw bitumen undergoes further refining to remove impurities and to achieve the desired consistency.
Oxidized bitumen, often referred to as blown bitumen is a specialized form of bitumen. It is created through a process that significantly alters the properties of the standard bitumen, making it more suitable for various industrial applications. This type of bitumen is distinguished by its increased resistance to water and temperature changes, playing a pivotal role in road construction and waterproofing solutions. It is produced by bitumenoxidized company
Oxidized bitumen is produced by bitumenoxidized company , plays a significant role in road construction, including: Waterproofing Layers: Acts as an excellent waterproofing agent, preventing water ingress into the road base.
Oxidized bitumen is produced by bitumenoxidized company, plays a significant role in road construction, including: Wearing Courses: Applied in the top layers of road surfaces, it provides a durable, hard-wearing finish capable of withstanding heavy traffic. Waterproofing Layers: Acts as an excellent waterproofing agent, preventing water ingress into the road base.
Bitumen 50/60/70/80..., minimum order 1000ton, price is according payment procedure.
We specialize in providing high quality Bitumen at affordable prices for various applications and markets. We can deliver Bitumen in different packaging options such as bulk, new steel drums, jumbo bags or flexibags depending on your needs and preferences. Our Bitumen products meet the standards and specifications of our customers in East of Asia Southeast Asia Subcontinent India Africa These are the grades we offer on a regular basis Bitumen 6070 Bitumen 50100 Bitumen 80100 Bitumen VG10 VG30 VG40 Bitumen Performance Grades Bitumen MC and Emulsion
FOB UAE in drums, prompt delivery for Bitumen available.
All refinery and petrochemical products from Iran
The most amount of bitumen which is used in the construction industry and road construction is also used in road and roof pavement The waterproofness and elasticity at high temperature are two perfect traits of bitumen that makes it ideal for a vast group of uses It works like an adhesive liquid at high temperatures normally between 100_ 200 and it can get mixed with the other components and get shaped if needed
Properties Range Test Method ----------------------------------------------------------------------------------------------------------------------------------------- 1. Penetration Point @25°C 80-100 ASTM D 5 2. Softening Point °C 49-56 ASTM D 36 3. Ductility 100 min ASTM D 113 4. Loss on Heating (Wt)% 0.2 max ASTM D 6 5. Drop in Penetration after Heating %" 20 max ASTM D 6 6. Flash Point °C 250 min ASTM D 92 7. Solubility in CS2 (Wt)% 99.5 min ASTM D 4 8. OM Insoluble in CS2 (Wt)% 0.5 max ASTM D 4 9. Specific Gravity °C 1.01-1.06 ASTM D 70 10. Spot Test Negative AASHOT 102
