BS2 type Sealed spherical roller bearing with two rows of rollers,the features is the bearings with extended width , BS2-2309-2CS, the prefix BS2 means the dimension series, 2CS=2RS means NBR seal. Besides,we can also provide HNBR seal, FKM seal. Our BS2-2309-2CS bearing design structure is the same as SKF BS2-2309-2RS/VT143, as per your requirement, we can change BS2-2309-2CS bearing seals and structure and Lubricant filling to Customization production. Enough stock for WSBC BS2-2309-2CS bearing to ensure fast delivery, high quality and favourable price to help you save much cost. If you have inquiry or want know more about WSBC BS2-2309-2CS bearing, pls do free to contact me.
Single Row Tapered Roller Bearing 32940 Inner Ring: 200.000mm Outer Ring: 280.000mm Width: 51.000mm Width of Inner Ring: 51.000mm Width of Outer Ring: 39.000mm Chamfer of Inner Ring: 3mm Chamfer of Outer Ring: 2.5mm Basic Dynamic Load Rating: 460KN Basic Static Load Rating: 950KN Limited Speed (rpm): 950(grease)/1300(oil) Gross Weight: 9.5kg Tapered roller bearings have tapered inner and outer ring raceways between which tapered rollers are arranged, optimizing rolling conditions. Tapered roller bearings are utilized in applications where there is a combination of radial and axial (thrust) loads. Tapered roller bearings are separable and have the following components: outer ring, inner ring, and roller assembly (containing the rollers and a cage). The non-separable inner ring and roller assembly is called the "cone", and the outer ring is called the "cup". Internal clearance is established during mounting by the axial position of the cone relative to the cup. It is important to note that tapered roller bearings are predominantly sold as individual components. Therefore, it is important to know the part number of both the cup and the cone, as they will most often differ and there are often many cup/ cone combinations available. While feasible to replace only the cup or the cone when replacing a tapered roller bearing, it is not recommended as it greatly decreases bearing life. Tapered roller bearings are used in numerous applications and are capable of high loads and speeds. The predominant use is in any wheel application, where the tapered roller bearings are normally arranged in back to back pairs where they support axial and radial loads in both directions. Tapered roller bearings are available in a wide array of both inch and metric sizes.
Single Row Tapered Roller Bearing 30226 Inner Ring: 130.000mm Outer Ring: 230.000mm Width: 43.750mm Width of Inner Ring: 40.000mm Width of Outer Ring: 34.000mm Chamfer of Inner Ring: 4mm Chamfer of Outer Ring: 3mm Basic Dynamic Load Rating: 387KN Basic Static Load Rating: 539KN Limited Speed (rpm): 1620(grease)/2200(oil) Gross Weight: 7.02kg Single row tapered roller bearing can support a combined radial and axial load. If either a radial load or bi-directional axial load is to be carried, a pair of bearings must be used in a "face-to-face" or "back-to-back" mounting. The axial load carrying capacity of the bearings is largely determined by the contact angle. If the contact angle is larger, then the axial load carrying capacity is higher and vice versa. During equipment assembly, single row bearings can be set to the required clearance (endplay) or preload condition to optimize performance.
Sealed spherical roller bearing with two rows of rollers , sealed with contact seals on both sides , the features is to reduce maintenance costs , increase working life ,save grease and protect the environment .2CS=2RS means NBR seal. Besides,we can also provide HNBR seal,FKM seal. Our 23026-2CSK bearing design structure is the same as SKF 23026-2CS5K/VT143 , as per your requirement , we can change bearing seals and structure and Lubricant filling to Customization production. Enough stock for WSBC 23026-2CSK bearing to ensure fast delivery,high quality and favourable price to help you save much cost . If you have inquiry or want know more about WSBC 23026-2CSK bearing,pls do free to contact me.
Sealed spherical roller bearing with two rows of rollers , sealed with contact seals on both sides , the features is to reduce maintenance costs , increase working life ,save grease and protect the environment .2CS=2RS means NBR seal. Besides,we can also provide HNBR seal,FKM seal. Our 23026-2CSK bearing design structure is the same as SKF 23026-2CS5K/VT143 , as per your requirement , we can change bearing seals and structure and Lubricant filling to Customization production. Enough stock for WSBC 23026-2CSK bearing to ensure fast delivery,high quality and favourable price to help you save much cost . If you have inquiry or want know more about WSBC 23026-2CSK bearing,pls do free to contact me.
Sealed spherical roller bearing with two rows of rollers , sealed with contact seals on both sides , the features is to reduce maintenance costs , increase working life ,save grease and protect the environment .2CS=2RS means NBR seal. Besides,we can also provide HNBR seal,FKM seal. Our 24026-2CS bearing design structure is the same as SKF 24026-2CS5/VT143 , as per your requirement , we can change bearing seals and structure and Lubricant filling to Customization production. Enough stock for WSBC 24026-2CS bearing to ensure fast delivery,high quality and favourable price to help you save much cost. If you have inquiry or want know more about WSBC 24026-2CS bearing,pls do free to contact me.
Spherical Roller Bearing 24030C3 Inner Ring: 150.000mm Outer Ring: 225.000mm Width: 75.000mm Chamfer: 2.1mm Basic Dynamic Load Rating: 592KN Basic Static Load Rating: 1144KN Limited Speed (rpm): 1404(grease)/1902(oil) Gross Weight: 10.4kg Brass Cage Spherical roller bearing consists of an outer ring with spherical raceway and an inner ring with double-raceway, one or two cages, and one group of spherical rollers. Due to the center of spherical raceway of outer ring which is coinciding with the center of bearing, this makes it have a self-aligning capability. If there is a deflection of the shaft or housing or misalignment of their axes, it is automatically corrected the excessive force which is not applied to bearings. Spherical roller bearing has a high load carrying capacity for radial load and axial load in two directions. Spherical roller bearing is especially suitable for carrying heavy loads and impact loads, but this type of bearing permits a lower limiting speed. The permissible aligning angle of the spherical roller bearing working in normal conditions is 1°~2.5°. If bearings of this type have seals, then this function would be reduced. Spherical roller bearings are widely used in Steel Industry, Mining & Construction, Papermaking Machinery, Wind Turbines, Gearboxes, Electric Motors, Pumps & Compressors and Injection Molding Machines, etc. Multiple cage designs are available. Spherical roller bearings with hardened steel cages deliver greater fatigue strength, increased wear-resistance and tougher protection against shock and acceleration. Spherical roller bearings with brass cages provide extra strength and durability in the most unrelenting conditions, including extreme shock and vibration, high acceleration forces and minimal lubrication.
Spherical Roller Bearing 23072B Inner Ring: 360.000mm Outer Ring: 540.000mm Width: 134.000mm Chamfer: 5mm Basic Dynamic Load Rating: 2510KN Basic Static Load Rating: 5280KN Limited Speed (rpm): 724(grease)/952(oil) Gross Weight: 125kg Brass Cage Spherical roller bearing consists of an outer ring with spherical raceway and an inner ring with double-raceway, one or two cages, and one group of spherical rollers. Due to the center of spherical raceway of outer ring which is coinciding with the center of bearing, this makes it have a self-aligning capability. If there is a deflection of the shaft or housing or misalignment of their axes, it is automatically corrected the excessive force which is not applied to bearings. Spherical roller bearing has a high load carrying capacity for radial load and axial load in two directions. Spherical roller bearing is especially suitable for carrying heavy loads and impact loads, but this type of bearing permits a lower limiting speed. The permissible aligning angle of the spherical roller bearing working in normal conditions is 1°~2.5°. If bearings of this type have seals, then this function would be reduced. Spherical roller bearings are widely used in Steel Industry, Mining & Construction, Papermaking Machinery, Wind Turbines, Gearboxes, Electric Motors, Pumps & Compressors and Injection Molding Machines, etc. Multiple cage designs are available. Spherical roller bearings with hardened steel cages deliver greater fatigue strength, increased wear-resistance and tougher protection against shock and acceleration. Spherical roller bearings with brass cages provide extra strength and durability in the most unrelenting conditions, including extreme shock and vibration, high acceleration forces and minimal lubrication. Spherical roller bearings are available with a cylindrical bore for cylindrical type mounting, a tapered bore for tapered type mounting. To order tapered bore spherical roller bearing, add the suffix K( 1:12 ) or K30 ( 1:30 ) to bearing number (e.g., 23152K, 24172CAK30). An oil groove and holes are provided in the outer ring to supply lubricant and the bearing numbers are suffixed W33
Spherical roller bearing Part no.:22322 Inner ring: 110.000mm Outer ring: 240.000mm Width: 80.000mm Chamfer: 3 Basic dynamic load rating: 761kn Basic static load rating: 1062kn Limited speed (rpm): 1728(grease)/2240(oil) Gross weight: 18.1kg Brass cage Spherical roller bearing consists of an outer ring with spherical raceway and an inner ring with double-raceway, one or two cages, and one group of spherical rollers. Due to the center of spherical raceway of outer ring which is coinciding with the center of bearing, this makes it have a self-aligning capability. If there is a deflection of the shaft or housing or misalignment of their axes, it is automatically corrected the excessive force which is not applied to bearings. Spherical roller bearing has a high load carrying capacity for radial load and axial load in two directions. Spherical roller bearing is especially suitable for carrying heavy loads and impact loads, but this type of bearing permits a lower limiting speed. The permissible aligning angle of the spherical roller bearing working in normal conditions is 1� ~2.5�. If bearings of this type have seals, then this function would be reduced. Multiple cage designs are available. Spherical roller bearings with hardened steel cages deliver greater fatigue strength, increased wear-resistance and tougher protection against shock and acceleration. Spherical roller bearings with brass cages provide extra strength and durability in the most unrelenting conditions, including extreme shock and vibration, high acceleration forces and minimal lubrication. Spherical roller bearings are available with a cylindrical bore for cylindrical type mounting, a tapered bore for tapered type mounting. To order tapered bore spherical roller bearing, add the suffix k ( 1:12 ) or k30 ( 1:30 ) to bearing number (e.G., 23152k, 24172cak30).
Double Row Tapered Roller Bearing NA74525/74851CD Inner Ring: 5.250in/133.350mm Outer Ring: 8.500in/215.900mm Width of Outer Ring: 4.1875in/106.362mm Width of Inner Ring: 3.1875in/80.962mm Chamfer of Inner Ring: 0.14in/3.5mm Chamfer of Outer Ring: 0.06in/1.5mm Basic Dynamic Load Rating: 495KN Basic Static Load Rating: 985KN Gross Weight: 13.5kg Double row tapered roller bearings can support the combined load which is mainly consisted of radial load. It can restrict the axial displacement of the shaft or housing in the two directions and thus can be used as a bidirectional locating bearing. Double row tapered roller bearings can carry heavy radial and axial loads and are stiff, the axial load carrying capacity of tapered roller bearings increases with increasing contact angle, and are easy to be mounted and dismounted. Double row tapered roller bearings can be used in a preload situation to obtain higher rigidity and better running accuracy of the shaft. CJB provides both back-to-back arrangement (using one double cup and two single-row cones) and face-to-face arrangement (using two single-row cups and one double cone ). Their main use is in gearboxes, hoisting equipment, rolling mills and machines used in the mining industry.
Spherical Roller Bearing Part No.: 23226MBC3W33 Inner Ring: 130.000mm Outer Ring: 230.000mm Width: 80.000mm Chamfer: 3 Basic Dynamic Load Rating: 725KN Basic Static Load Rating: 1160KN Limited Speed (rpm): 1404(grease)/1904(oil) Gross Weight: 15.9kg Brass Cage Spherical roller bearing consists of an outer ring with spherical raceway and an inner ring with double-raceway, one or two cages, and one group of spherical rollers. Due to the center of spherical raceway of outer ring which is coinciding with the center of bearing, this makes it have a self-aligning capability. If there is a deflection of the shaft or housing or misalignment of their axes, it is automatically corrected the excessive force which is not applied to bearings. Spherical roller bearing has a high load carrying capacity for radial load and axial load in two directions. Spherical roller bearing is especially suitable for carrying heavy loads and impact loads, but this type of bearing permits a lower limiting speed. The permissible aligning angle of the spherical roller bearing working in normal conditions is 1°~2.5°. If bearings of this type have seals, then this function would be reduced. Spherical roller bearings are widely used in Steel Industry, Mining & Construction, Papermaking Machinery, Wind Turbines, Gearboxes, Electric Motors, Pumps & Compressors and Injection Molding Machines, etc. Multiple cage designs are available. Spherical roller bearings with hardened steel cages deliver greater fatigue strength, increased wear-resistance and tougher protection against shock and acceleration. Spherical roller bearings with brass cages provide extra strength and durability in the most unrelenting conditions, including extreme shock and vibration, high acceleration forces and minimal lubrication. Spherical roller bearings are available with a cylindrical bore for cylindrical type mounting, a tapered bore for tapered type mounting. To order tapered bore spherical roller bearing, add the suffix K� ( 1:12 ) or K30� ( 1:30 ) to bearing number (e.g., 23152K, 24172CAK30). An oil groove and holes are provided in the outer ring to supply lubricant and the bearing numbers are suffixed ?W33�.
Four roller tapered bearing Part no.: m244249d/m24421/m244210d Inner ring: 220.660mm Outer ring: 314.325mm Width of outer ring: 239.712mm Width of inner ring: 239.712mm Chamfer of inner ring: 1.5 Chamfer of outer ring: 3.3 Basic dynamic load rating: 2310kn Basic static load rating: 4620kn Gross weight: 57.5kg Inch size four row tapered roller bearings with imperial dimensions are constructed of two double row inner rings and two double row outer rings, combine the inherent high-load, radial/thrust capacity and direct/indirect mounting variables of tapered roller bearings into assemblies offering maximum load rating in minimum space. Inch size four row tapered roller bearings are pre-adjusted clearance, matched bearing assembly, all the parts are numbered to ensure the correct installation sequence
Double Row Cylindrical Roller Bearing NNU4952/W33 Double Row Cylindrical Roller Bearing Part No.: NNU4952/W33 Inner Ring: 260.000mm Outer Ring: 360.000mm Width: 100.000mm Outside Diameter of Inner Ring: 289.000mm Chamfer: 2.1 Basic Dynamic Load Rating: 981.75KN Basic Static Load Rating: 2310KN Limited Speed (rpm): 1512(grease)/2016(oil) Gross Weight: 29.2kg Brass Cage, With An Oil Groove and Lubricating Holes Double row cylindrical roller bearings are divided into bearings with cylindrical bore and tapered bore (add K behind bearing type). This type of roller bearings have compact structure, good rigidity, heavy load carrying capacity, and little distortion under loads. Because of their second row of rollers, double row cylindrical roller bearings are suitable for heavy radial loads. Double row cylindrical roller bearings are applicable for the machine tool spindle. Tapered inner bore could fine adjust clearance, simplify positioning fixture and be convenient to mount and dismount. Depending on the existence of ribs on their rings, double row cylindrical roller bearings are classified into NN, NNU types. Type NN double row cylindrical roller bearings have two integral flanges on the inner ring, a flangeless outer ring and a center flange in the middle. Double-row cylindrical roller bearings permit axial displacement in double directions of the housing relative to the shaft. Type NNU double row cylindrical roller bearings have two integral flanges on the outer ring, a non-contacting inner ring and a center flange in the middle. Double row cylindrical roller bearings permit axial displacement in double directions of the housing relative to the shaft. Therefore, this type of bearing is suitable to be used as non-locating bearings.
Stern tube white metal bearing : This product is vessel stern tube bearing made of white metal ,This bearing is suitable for vessels of different sizes whose lubricating medium is oil . This bearing consists of two parts . Stern tube front bearing and stern tube rear bearing . We can supply two types of this stern tube bearing . :type A and type B . If you have any other requirments , we can make a special design .
The materials of Biaolong bearing are applied in stern fin and intermediate shaft bearings of all kinds of ships whose materials have commonalities of all the gliding bearings and are applied in all the open lubrication systems and closed lubricating systemsï¼?It is a polymer material can used stern tube,shaft and rudder,as the differences of using fields and lubricating mediumsï¼?multi-copolymer can meet its special requirements
Deep groove ball bearing Part no.:61856 Inner ring:280.000mm Outer ring: 350.000mm Width: 33.000mm Chamfer: 2.1 Basic dynamic load rating: 145kn Basic static load rating: 220kn Limited speed (rpm): 1728(grease)/2128(oil) Gross weight: 7.17kg Deep groove ball bearings are the most common type of rolling bearings. Deep groove ball bearings are mainly used for pure radial loads, but also can stand small radial load. Because of their low torque, they are highly suitable for applications where high speeds and low power lose are require. Deep groove ball bearing structure is simple, and manufacturing costs is low, widely used in transmission, instrumentation, motors, household electrical, internal combustion engines, transportation vehicles, agricultural machinery, construction machinery and engineering machinery. For deep groove ball bearings, pressed cages are usually used. For large size bearings and high-speed applications, machined brass cages are used
Single row tapered roller bearing Part no.: 30228 I.D: 140.000(mm) O.D: 250.000(mm) Width: 45.750(mm) Width of inner ring: 42.000(mm) Width of outer ring: 36.000(mm) Chamfer of cone: 4 Chamfer of cup: 3 Basic dynamic load rating: 439 kn Basic static load rating: 627kn Limited speed (rpm): 1512(grease)/2090(oil) Gross weight: 8.8kg
Tapered bore four row cylindrical roller bearing Part no.: 801669 I.D: 181.500(mm) O.D: 260.000(mm) Width: 168.000(mm) Chamfer of inner ring: 1 Chamfer of outer ring: 1 Tapered bore: 1:12 Gross weight: 27.5kg Usually large size four row cylindrical roller bearings are used as rolling mill bearings, mainly used by heavy engine machines, such as, in a rolling mill, mining, metallurgy, plastics machinery, large cold and other heavy machinery
Part no.:24038 cck30c3w33 Inner ring:190.000(mm) Outer ring: 290.000(mm) Width:100.000(mm) Chamfer: 2.1 Basic dynamic load rating:1027 kn Basic static load rating: 1980kn Limited speed (rpm): 1026(grease)/1456(oil) Gross weight: 24.5kg steel cage, 1:30 tapered bore, c3 clearance, with an oil groove and holes Spherical roller bearing has a high load carrying capacity for radial load and axial load in two directions.Spherical roller bearing is especially suitable for carrying heavy loads and impact loads, but this type of bearing permits a lower limiting speed. The permissible aligning angle of the spherical roller bearing working in normal conditions is 1 , 2.5. If bearings of this type have seals, then this function would be reduced.
Angular contact ball bearing Part no.:509098a Inner ring:175.000(mm) Outer ring: 235.000(mm) Width of outer ring:27.000(mm) Width of inner ring: 30.000(mm) Chamfer: 1.8 Gross weight: 3.4kg Machined brass cage Angular contact ball bearings are also called angular contact radial thrust ball bearings. Angular ball bearings are particularly suitable for carrying axial load in one direction together with radial load, or accommodate axial loads in one direction only. Because of their design, when axial load is applied, an axial force component is produced; two opposed bearings or a combination of more than two must be used. The axial load carrying capacity of angular contact ball bearings changes along with contact angle. The larger the contact angle, the better the axial load carrying capacity is. Angular contact ball bearings are mainly used in machine spindle, gearbox, reducer and supercharger
