Scrap vessels.
PRODUCT: Lithium ( spodumene) ORIGIN: Nigeria QUANTITY: Trial Shipment l,000MT within 35 days after received LC, Monthly shipment up to 30,000MT PRICE CIF CHINA: Grade 5.0% - 5.499% price shall be paid at US$460/metric ton Grade 5.5%- 5.999% price shall be paid at US$510/metric ton Grade 6.0%- 6.499% price shall be paid at U560/metric ton Grade 6.5%- 6.99% price shall be paid at US$610/metric ton Grade 7.0%- 7.499% price shall be paid at US$660/metric ton Grade 7.5% - 7.99% Price shall be paid at US$710/metric ton Grade 8.0% - 8.499% price shall be paid at US$760/metric ton Grade 8.5% - 8.999% price shall be paid at US$810/metric ton 2 Grade 9.00% and above price shall be paid at US$860/metric ton QUALITY: Li: 9% BASIS WITH 5% MIN (rejection below 4%) PHYSICAL SIZE: 0 - l00MM 90% MIN (If buyer requires crushing to smaller size then it would require a little higher price) PACKING: Containers loaded in bulk, or in bulk vessel shipment. SHIPMENT: 35 days maximum after received of irrevocable confirmed Letter of Credit PORT OF LOADING: Apapa port Lagos, Nigeria PORT OF DESTINATION: CIF China Port. INSPECTION: CCIC International (CCIC International is a Chinese Inspection Institution) 90 % PAID AT LOADING PORT TO MINER WITH CCIC INSPECTION PAID BY MINER 10% AT UNLOADING PORT WITH CCIC INSPECTION PAID BY BUYER TERM OF PAYMENT*: By 100% Non-Transferable, Irrevocable confirmed Documentary Letter of Credit from a prime bank payable at sight for 90% pro visional (Bill of lading, invoice, packing list, Q and Q) at origin port and 10% at destination. port PROCEDURES: LITHIUM ORE exportation Procedure* THE PROCESS BEGINS WITH DIRECT BUYER TO ISSUE A LETTER OF INTENT WITH THEIR BANKING ON IT TO: MR. .... NIGERIA GRW AGENCY 4, NURUDEEN STREET, OFF AKINREMI STREET, ANIFOWOSHE, IKEJA, LAGOS, NIGERIA. NOTE: (1) THE LC WILL GO TO THE DIRECT MINER (2) GRW HAS A SIGNED AND SEALED MARKETING CONTRACT WITH THE MINER TO HANDLE THE MARKETING OF THE MINEâ??S ORES (3) BUYER CAN BE AT LOADING 3 Then the following is the rest of the procedure: 1. Buyer and Seller Sign Contract. 2. Buyer issues LC draft, and seller issue 2% PB draft 3. Seller confirms LC draft, and Buyer confirms 2% PB draft 4. Buyer issues his irrevocable non-operative Letter of Credit at sight in favor of the seller. (It will be the direct miner) 5. The Seller issues a performance guarantee (2%PB) in favor of the buyer to activate the Letter of Credit. 6. Shipment commences as per agreement. 7. Seller summits documents
Quick details: Place of origin: baku, azerbaijan Material: hdpe Thickness: 2.7-12.5 mm Item: three-layer fiber glass pprc Rating: ip65 Certification: iso9001 Color: white Standard: ohsas 18001 Specification: as your requirement Od: 16-75 mm Length: as your requirement Packaging & delivery: Depends on your order. Description: Pipes made of “random polypropylene” are widely used in modern life. Being light and very durable, this thermoplastic is resistant to solvents, acids and alkali. Pipes made of this material are used at temperatures from -40°? to +95°?. Elasticity of pipe prevents crack formation, when water is frozen inside. We use high quality polypropylene from known manufacturers, such as sabic etc.In the production of fiber pipes.These pipes are produced in the equipments of well-known german companies. We offer to our customers high quality pipes with reasonable prices. Advantages of pipes: • Quality: raw materials used in our factory are mostly produced in europe and correspond the requirements of din, tse, iso 9001 standards. • Reliability: systems assembled from these pipes have high temperature and pressure resistance. • Pipes service life: garantee of these pipes is 50 years and it can be changed depending on used temperature. • Corrosion and chemical resistance: pipes are corrosion and aggressive environment resistant. • Flow rate: due to the smooth inner surface these pipes has increased flow rates • Ecological cleanness: operation polypropylene does not enter into the reaction with water, thereby does not add foreign flavor to water. Its inner surface is lubricous, therefore, formation of bacteria, organic and non-organic sludge is not observed. • Durability: middle layer of high temperature linear expansion of fiberglass prevents pipe bending and significantly increases pressure resistance.
Quick details: Place of origin: Baku,Azerbaijan Material: HDPE Thickness: 1.8-70.5mm Item: PE 100 pipes Structure: Bellows inside and outside Certification: ISO9001 Color: black Standard: OHSAS 18001 Specification: As your requirement OD: 16-1200 mm Length: As your requirement Type: Flexible and Durable Packaging & delivery: Depends on your order. Description: Preparation of ?? 100-based polyethylene Pipes is considered as a beginning of a new phase in plastic Pipes production. These Pipes are considered more contemporary and characterized by high pressure resistance. As distinguished from other brands of Pipes (?? 63, ?? 80), these Pipes with less wall thickness have higher mechanical characteristics. Pipes ?? 100 are applied in the following areas: • Underground and surface drinkable and technical water pipeline network • Water drainage system • Field irrigation systems • Oil fields • Chemical and petrochemical industry • Construction of buildings and industrial facilities • Construction of main and local gas pipelines Advantages of PE100 Pipes: • Durability. ?? 100 Pipes obtain 50 years of minimal guarantee, this duration can be extended during operation. • High shock resistance, cracking resistance • High chemical resistance • Resistance to sunlight • Manufactured in standard sizes and in roll form • Smooth inner surface • Suitable for the usage in seismically active areas • Freeze resistance • Wide range of pressure Range of pipe sizes produced under normal pressure • DN - outer diameter of pipe, (mm) • s - pipe wall thickness, (mm) • SDR - Standard Dimension Ratio • M - Estimated weight (kg/m) 20 bar - SDR 9 DN: 16- 630 mm S: 2-70.3 mm M: 0.09-123 kg/m 16 bar - SDR 11 DN: 20-710 mm S: 2-64.5 mm M: 0.116-131 kg/m 12,5 bar - SDR 13,6 DN: 25-1000 mm S: 2-73.5 mm M: 0.148-214 kg/m 10 bar - SDR 17 DN: 32-1200 mm S: 2-71.1 mm M: 0.193-252 kg/m 9,5 bar - SDR 17,6 DN: 40-1200 mm S: 2.3-68 mm M: 0.281-242 kg/m 8 bar - SDR 21 DN: 40-1200 mm S: 2-57.2 mm M: 0.244-206 kg/m 6,3 bar - SDR 26 DN: 50-1200 mm S: 2-45.9 mm M: 0.308-167 kg/m 5 bar - SDR 33 DN: 63-1200 mm S: 2-36.7 mm M: 0.392-134 kg/m 4 bar - SDR 41 DN: 75-1200 mm S: 2-29.4 mm M: 0.469-108 kg/m
Quick details: Place of origin: baku, azerbaijan Material: hdpe Thickness: 0.9-1.2 mm Item: dip Certification: iso9001 Color: black Standard: ohsas 18001 Specification: as your requirement Od: 12-20 mm Length: 36-40 mm (length of drip component) Drip flow rate: 1.5-4.0 (liter/hour) Distance between drip components: 190-1050 Packaging & delivery: Depends on your order. Description: After cleaning the mixture from sand, clay, water and algae, etc. With the help of special filters, water is transferred in drops directly to the roots of plants through drop irrigation pipes. Drip irrigation pipes can be used in any landscape terrain. Applicaton of this system allows automation of overall irrigation system, which in its turn facilitates to reduce the use of work force. Contrary to surface irrigation method, drip irrigation increases the efficiency factor higher than 95%. Application of drop irrigation components has several positive aspects: • Enables the fertilizer to penetrate with water • Enables maximum equal distribution of water and nutrients • Allows irrigating large territories simultaneously in small portions • As the ground between plants is dry, it prevents the grow of weeds that helps to facilitate pest control. • High pressure is not required in drip irrigation that reduces operating expenses.
Quick details: Place of origin: baku, azerbaijan Material: hdpe Thickness: 1.9-15 mm Item: polypropylene ppr pipesprotection rating: ip65 Certification: iso9001 Color: white Standard: ohsas 18001 Specification: as your requirement Od: 20-90.0 mm Type: pn-10, 16, 20 Length: as your requirement Packaging & delivery: Depends on your order. Description: Advantages of pipes: • Quality: raw materials used in our factory are mostly produced in europe and correspond the requirements of din, tse, iso 9001 standards. • Reliability: systems assembled from these pipes have high temperature and pressure resistance. • Pipes service life: garantee of these pipes is 50 years and it can be changed depending on used temperature. • Corrosion and chemical resistance: pipes are corrosion and aggressive environment resistant. • Flow rate: due to the smooth inner surface these pipes has increased flow rates • Ecological cleanness: operation polypropylene does not enter into the reaction with water, thereby does not add foreign flavor to water. Its inner surface is lubricous, therefore, formation of bacteria, organic and non-organic sludge is not observed.
Quick details: Place of Origin: Baku,Azerbaijan Specification: Depends on your requirement Size: Depends on your requirement Model Number: HDPE Thickness: Depends on your requirement Color: Black,White Material: PE Standard: OHSAS 18 001 Types: Elbows 45,90 dgr., Tee T-Joints 90 dgr., Tee Reducing T-Joints 90 dgr., Pipe Caps, Reducing couplings, Flange Adaptor. Packaging & delivery: Depends on your order. Description: Cast fittings - pipe fittings are manufactured by molding of polyethylene (PE100) under pressure and temperature. Cast fittings are used in cases when you want to change the direction of tubing, tee off, or switch to a different diameter. A significant advantage of cast fittings is their relatively low cost associated with the ease of manufacture. Installation is carried out by butt welding, which reduces the financial costs because practically no consumables required at the same time relatively simple installation. Elbows, flange bushings, reducers, tees and caps, are used in gas and water pipes made of PE100 from 63 to 315 mm.
Toolroom having efficient precise equipment can fast and in workman-like manner to produce production tools: details pressurization from plastic and rubber, including additional remote fueling connecting, moulds for 2 colored founding. demention of pressing details 1000x1200mm, mould weight to 3000 kg, stableness 60-100 thousand snatching. For improvement details setting, appearance qualitative of shape mould elements executed from stainless steel with grade 40×13 thorough work surface polishing. Forms for founding under pressure of from aluminum alloy and zinc alloy. Maximal measurement casts 1000×1200 mm, forms weight to 3000 kg, stableness 50-80 thousand snatching. Different die tooling including die tooling for fine blanking details on moulds threefold actions, providing shear purity not lower RA 1,25 and dimensional accuracy up to 7 finish, which excludes ancillary details mechanical revision (grinding). Labor componentry are practically gapless (gap between labor parts is 0,005mm), executed from steel X 12M, maximal sizes of operating groove500x600mm, stamp stab-leness up to 300 thousand snatching. For stamp stableness decreasing it is possible variant labor componentry with hardmetal alloys usage. Instrumental equipped by highly productive equipment and unique machine CHPU Fanuc. For increase of durability of casting forms lowtemperature galvanization is applied. Plant has unique site of fine blanking on presses of triple action with force of slash form 50 up to 240 tn per sec. Enterprise has facility to get orders for manufacture of blanking, pressforms and forms for casting under agreed prices. Term of manufacture is from 1 up to 6 months depending on complexity of arming. The workshop realizes complete cycle of pressforms casting. Projection of arming is realized by appliance of engineering modeling programs. Development of technologic programs of mechanical processing Manufacture of details on boring, turning machine Milling, thermal treatment, profile, round, optic, coordinate polishing, erosion weaving, wire cuts Benchwork, polishing and mounting Besides pressforms the workshop manufactures stamps, appliances, spare parts to equipment and other items. Subsidiary services operate, also repair, service of the equipment, tool grinding. Personnel of technical department and of the workshop possesses great experience in projection and manufacture of pressforms. Documentation in technical department on arming passes agreement, and technical development. Technological programs of machine processing are established, tool of second tranquility is projected.
Naphthenic acids and their derivatives are widely used in more than 40 sectors of national economy. Naphthenic acids in a form of lead, manganese, zinc, ferrum, aluminium, chrome salts and in a form of other derivatives, are used in preparation of paint driers, varnishes, paints. Free naphthenic acids are used as a part of inks and improves their mobility. These acids are also used as thinner for aniline colorants, sleeper impregnation material preserving wood from rotting. Both free and derivative naphthenic acids have effective fungicidal, insecticidal, bactericidal and preservative parameters which are used in weed and pest control, for impregnation of wood, sail fabric, canvas, rope, tarpaulin, fishing gear and other materials regularly affected by moisture, bacteria, pest, etc. Lead, chrome, cobalt and manganese salts of naphthenic acids are used as antistatic, antideteriorant and antifoam additives for fuel, jet engine fuels and oils. Lubricating and emulsifying materials used for cooling of shearing machines, pasting, lubrication grease for high-pressure plants, demulsifiers brea-king petroleum and oily emulsions are based on naphthenic acids. Simple and compound ethers of naphthenic acids are used as plasticizers for production of polymeric materials, general rubber goods, polyvinylchloride plastic, hydraulic liquids, etc. Naphthenic acids are successfully used even at cleaning of rareearth elements, extragens of radioactive materials, catalysts, oxidation and oxonation processes, agricultural growthregulating substances, drying accelerators for glassreinforced polyesters, etc. In order to meet consumer needs for naphthenic acids, “KARVAN-L” company has developed technology and established commercial installations for output of high-purity acids.
Specifications: API GL-5 Packaging: 1 L metal container 12 units / case 4 L metal container 4 units / case 20 L plastic container 1 unit / case 208 L drum - TECHNOL GEAR OIL 80W-90 GL-5 is an extreme pressure gear oil produced using selected high quality mineral base oils to fulfill stringent requirements of manual gearboxes, transfer boxes, rear axles, and differentials of passenger, commercial and industrial vehicles which require API GL-5. Its high viscosity index ensures excellent lubrication of moving gear components and improves gear shifts at very low and very high temperatures and its high thermal stability provides protection against deposit formation. This fluid has excellent antioxidant, antiwear, antifoaming, anticorrosion, antirust and load carrying properties.
Packaging: 0.9 kg plastic container 12 4 kg plastic container 1 15 kg plastic container 1 175 kg drum - TECHNOL LITOL-24 is a multipurpose lithium grease formulated with high quality mineral base oils and a lithium soap thickener. It is suitable for use in plain and rolling bearings, sliding surfaces, friction units of wheeled and tracked vehicles, industrial, agricultural, and construction equipment and marine machinery for various purposes under extreme operating conditions. This grease possesses high viscosity and exhibits outstanding resistance to oxidation, wear, corrosion, and rust. It has been formulated to provide excellent protection against high temperatures, extreme pressure, and shock loads. It is recommended for use in the temperature range from -40 C to 120 C.