Double side planer: Its high speed feed up to 40M/min. High production ! Increasing your production profit ! There are two outfeed rollers and two table rollers provided at the outfeed end of the top cutter-head. All rollers are powered to assure more porwerful and stable feeding performances. The powerful 5HP feed drive motor combined with inverter and gear reducer will handle the most demanding work. Its high speed feed up to 40M/min. It can provide extra powerful workpiece feeding and permit high-speed planning easily.
Two sided planer: In the field of woodworking, for wider double side processing, we would like to provide you except the sanding machine another choice-1020 m/m (40!¡l) gtm-1020w Double surface planer. For ensure the smoothly processing, series gtm-1020w is designed supplely the feed- in from tip plug, and multi-spindle power transports feed-out. Our durable spiral cutter can cut woods in low noise and not easy to cause a stain on woods. Gtm-1020w could complete double surface processing at one time with fast feeding (7m ~ 20 m/min). For the clamp board width within 1m, the light sanding after double side planning could reach the effect of one side sanding and one side surfacing. Gtm-1020w contains several special parts that the traditional double side planer lacked, plus decades of professional planer machine produce experience to design and manufacture reliable products, no doubt that !¡±gtm-1020w!¡l will be your best choice! Please visit our web site for more information. Price, moq, deliver time are negotiable, please contact us for correct quotation and product details.
Wooden toothpick making machine.
FrameCut from the whole steel plate Cylinder diameter220mm Cylinder structureSolid Cylinder stoker200mm Hydraulic systemTaiwan HeatingElectric heating, nano technology Vacuum pumpImport.
Outer size (length*width*height): 9930mm*2230mm*2150mm Inner size: 2550mm*1270mm Weight: 10t Maximum working height: 50mm General power: 46.5kw. Outer size (length*width*height): 9930mm*2230mm*2150mm Inner size: 2550mm*1270mm Weight: 10t
High frequency vacuum dryer is smaller type fast dryer, suitable for hard or thick wood drying, it is a best choice for hard wood furniture company. High frequency dryer applies both high frequency and vacuum condition. 1.Character: High frequency heating: high frequency power acts only on the moisture of the wood, it penetrates the wood and where there is water or moisture, there is high frequency power. So it dries: fast and uniform Vacuum condition: At vacuum condition, the water is vapor at very low temperature, so this eliminate the problem of sparking or splitting problem for hard wood, especially for the type of extremely hard wood that likely to spark if drying temperature is too high. Further more , vacuum condition create a minus pressure in the tank, this minus pressure suck the water or moisture out of the wood fast 2 sagas high frequency dryer is plc automatically controlled , high frequency and vacuum pump is start and puse automatically during drying, water come out of the wood is automatically released by water control system to a water holding tank. Weight calculating system get the data of weight change of the wood, by this, the moisture content with-in the wood is readable. Very precise fiber glass(optical fiber) temperature sensor make sure the wood drying at right temperature to eliminate any chance of split or spark on the wood. Plastic and foam, seaworthy package Dimensions of tank: 1300mm Gross weight:9400kgs
Danyang dingjian tools co., ltd. Was founded in 1991 and is located in danyang city, one of the biggest manufacturing base for cutting tools in china. As a leading professional cutting tools supplier in china, our main products include drill bits, saw blades, hole saws, tool bits, screws, shovel, wrench, reamers and other cutting tools, We has a batch of skilled workers, experienced technicians and senior engineers. We also introduce advanced automatic equipment for research, development and manufacture. Meanwhile, we are punctilious in pursuit of raw materials, process of manufacture and test of quality, trying our best to reduce the cost and supply customers with high-quality products at low prices. We have been supplying quality tools and accessories for trading and construction companies for years. There is no service we do not bend our backs to perform. We have created a reputation in our field as a company which can compete in quality, price along with timely delivery. For the last we know the needs of our customers and therefore work hard to fulfill their requirement and to see that they are satisfied. It is our firm belief for our customers that we cannot spell s_ccess without "u".
Dcx 2000 series computerized frame paperboard cutting machine Max cutting speed 600mm/s Max moving speed 4500mm/s Max cutting thickness 3mm Cutting angle 45/55 Effective cutting range 1200*800mm Resolution ratio
Feature: 1.Blade up & down movement by electric control. 2. digital display for saw blade inclination angle(0-45 degree). 3. wide duralumin sliding table. 4. high precision steel guide. Main technical parameter for MJ61-32TAS. Dimension of sliding table3200x435mm Gross cut capacity 3200mm Width of cut between saw blade and rip fence 1250mm Saw blade diameter 300mm(250-450mm) Height of cut (300mm) 80mm Speed of main saw spindle 4500/6000rpm Main spindle diameter 30mm Tilting saw blade 0-45-90° Main motor 5.5kw 380V , 50HZ, three phases Scoring saw blade diameter 120mm Speed of scoring saw blade 8000rpm Scoring saw diameter 20mm Scoring motor 1.1kw weight 950kgs Overall dimension 3200x2450x900mm.
Profile : E4E,T&G 2 side, reeded , groove and double profile Conditions : KD MC 12 - 20% Cutting : Quarter sawn and semi quarter sawn. Standart ISPM #13 KD processing and S4S Size : 100 x 1050 x length wood size 110 x 1200 x length wood size buyers order.
Profile : T&G 2 side, E2E, E4E and reeded KD MC 12 - 16% Cutting : Quarter sawn and semi Quarter sawn colour : uniform colour or semi unform colour Unfinish. Standard ESPM #13 KD processing and S4S size : buyer order.
Max. drilling diameter : 35mm Max. drilling depth : H max=60mm Max. processing pitch: 1300x672mm Min.processing pitch: 130x32mm Total number of drilling shafts: 63 pcs Total number of drilling rows: 21x3 rows Installing dia to the drill: 10mm Distance between spindle: 1300mm Working pressure: 0.5~0.6Mpa Total power of motor: 4.5kw Spindle speed: 2840rpm Exterior of machine: 2200x2500x1600mm Weight of machine: 1400 kgs. Packing: wooden case.
1, Using four-edge knife, easy to use and low cost. 2, Knife plate voltage controlled by the hydraulic control, advanced structure, reliable performance. 3, Feed part adopt stepless speed .It has good peeling effect on the cold wood, curved wood, eucalyptus, oak, elm and other tree species has a good hard. 4, Peeling the net high, high productivity, little injury for the wood. Model (slwd)150220260300 Max diameter150mm 220mm 260mm 300mm Knife quantity 4 4 4 4 Main power 4.0kw4.0 kw5.5 kw 5.5 kw Driving power 1.5 kw1.5 kw1.5 kw1.5 kw. Wooden case.
1, Whole machine welded with seamless steel structure which is stable and durable. 2, There axises of X,Y and Z equip dust cleaner system to prolong life-time. 3, Workpieces can be placed at the stop. 4, It is compatible with the process codes of multiple national and international software. Technical data: Machine size : 1440*3040mm Work envelope : 1300*2500mm Respositioning resolution : 0.05mm Resolution : 0.025mm Power of spindle : 4.5kw Spindle speed : 1-1800(2400)rpm Power of horizontal spindle : 6kw Rotate speed of horizontal spindle : 1-1800rmp Max.speed : 30m/min Max.cutting speed : 15m/min Bridge clearance : 200mm Working voltage : AC380v/50HZ Command code : HPGL,Gcode.
Motor 2.2kw Saw Wheel Diameter Ø600mm Saw Blade Speed 10 m/s Max Cutting Depth 260mm Speed of saw wheel 900r/min Table Size 695*610mm N.G.Weight(kgs) 210kgs Table Tilt 0°-45° Overall Size(cm) 1180*720*1850. In wooden box.
Dimensions sliding table: 3200x370mm Cross cut capacity: 3200mm Width of cut between saw blade and rip fence: 1250mm Saw blade Dia.: 300mm(dia.250-dia.350) Height of cut dia.300mm: 70mm Height of cut with saw blade dia.300mm at 45degree: 55mm Speed of main saw blade: 3/4/5000rpm Spindle diameter: 30mm Tiling saw blade: 0-45 degree Main motor: 4kw Scoring saw blade: 120mm Speed of scoring saw blade: 9000rpm Spindle of scoring saw: 20mm Motor: 0.75kw Net weight: 1100kg Gross weight (wooden packing case): 1150kg Overall dimensions: 3180x3200x900mm. In wooden case.
Technical Specifications : Exterior size: 5800(Double plate 8800) mm, 1500 mm, 1400mm Working plate inner size: 2550mm, 1150 1300 mm (if producing the door, you choose 1150mm;if producing cabinet, you choose 1300mm) Maximum height of the work piece:50mmincluding height of Magnetic block or bottom plate Rating working pressure: -0.095Mpa General Power: 15kw Actual power consumption: about 5kw Weight: 2.5T Top temperature:180. EPE film+preservative film 3.2X1.8X2M 2500KG.
Technical Specifications : Exterior size :10030mm, 2230 mm, 2150mm Working plate size:2580mm, 1270mm inner size Suitable for cabinet, the width of PVC film should be 1400mm Maximum height of the work piece :50mm including bottom plate Rating working pressure: Positive pressure 0.6Mpa Negative pressure : -0.095Mpa General Power: 65kw Actual power consumption : About 15kw Weight :12.6T Top temperature:150 EPE film+preservative film, 3.25x2.25x2.05m+2.3x1.25x1.8m 12000kg.
MHS1560*600 Technicial Specifications: Characteristics: Comb tenoning and splicing is an effective way to connect the timbers to a longer length, is able to increase the utility rate of shorter timbers and reduce resources waste. The automatic finger-joint production line features compact structure, rational arrangement, high precision and efficiency, and manpower saving, is widely used timbers processing industry. Model MXZ3515T Auto Finger Shaper (Include Glue Spreading) MXZ3515 Auto Finger Shaper MHZ1560 Auto Finger Joint Assembler Table size (W*L) 850*600mm 850*600mm ---- Max. working size (L*W*H) 850*80*150 850*80*150mm 6200*150*80mm Min. working size (L*W*H ) 200*30*20mm 200*30*20mm 1000*30*20mm Shaper spindle diameter 70 mm 70 mm ---- Shaper blade diameter 160 mm 160 mm ---- Main saw blade size 255 mm 255 mm 355 mm Shaper spindle speed 5000 rpm 5000 rpm ---- Main saw spindle speed 2840 rpm 2840 rpm 3700 rpm Spreader roller speed 58 rpm ---- ---- Total motor power 17.24 kw 16.12 kw 7.7 kw Working air pressure 0.8 Mpa 0.8 Mpa 0.8 Mpa Max. jointing force ---- ---- 7800 kg Max. production rate ---- ---- 31 m/min.
MHS1560*600 Technicial Specifications Characteristics: Comb tenoning and splicing is an effective way to connect the timbers to a longer length, is able to increase the utility rate of shorter timbers and reduce resources waste. The automatic finger-joint production line features compact structure, rational arrangement, high precision and efficiency, and manpower saving, is widely used timbers processing industry. Model MXZ3515T: Auto Finger Shaper (Include Glue Spreading) MXZ3515 Auto Finger Shaper MHZ1560 Auto Finger Joint Assembler Table size (W*L) 850*600mm 850*600mm ---- Max. working size (L*W*H) 850*80*150 850*80*150mm 6200*150*80mm Min. working size (L*W*H ) 200*30*20mm 200*30*20mm 1000*30*20mm Shaper spindle diameter 70 mm 70 mm ---- Shaper blade diameter 160 mm 160 mm ---- Main saw blade size 255 mm 255 mm 355 mm Shaper spindle speed 5000 rpm 5000 rpm ---- Main saw spindle speed 2840 rpm 2840 rpm 3700 rpm Spreader roller speed 58 rpm ---- ---- Total motor power 17.24 kw 16.12 kw 7.7 kw Working air pressure 0.8 Mpa 0.8 Mpa 0.8 Mpa Max. jointing force ---- ---- 7800 kg Max. production rate ---- ---- 31 m/min.
