BITUMEN WATERPROOFING SHEETS
FRP Water Proofing
Silage covering is used in silage protection. It's a five layers polythene film, white on the topside to reduce heat build up in the silage and black on the underside to inhibit light penetraction. It can eliminate fungal growing and harmful secondary fermentation. Specification of Popular silage sheet: Popular thickness: 5mil/127mic; 6mil/150mic. Popular width: 10m; 12m, 15m, 16m, 18m Popular length: 30m; 45m; 60m; 90m; 300m Color: White on topside, black downside Material: 100% virgin premium PE+UV protection Film Layer:Five-layer(5-layers) Co-extrusion Advantage of Plastic Silage sheet: a.The competitive price and alternative size; b.UV protection for more than 15months; c.Eccellent anti puncture, abrasion and tear resistance; d.High tensile strength; e.Reduce labour cost and economical storage system; f. Well packaged for roll protection.
SBS Elastomer modified bitumen membrane is SBS thermoplastic elastomer modified asphalt roofing, high-quality polyester felt, glass fiber mat, glass reinforced polyester mat for the child based, sand, mineral therapy, PE film, aluminum as cladding material, the use of special mechanical mixing and grinding of the elastomer modified bitumen membrane. Plastic modified bitumen waterproofing membrane APA0 or APP0, AP0 to modified asphalt roofing, high-quality polyester felt, glass fiber mat for the child based, sand, mineral grains chat, PE coverage of membrane materials, use of advanced technology refined plastic modified bitumen membrane. BRAND:XINLEI SPECIFICATIONS: 1.Width:1m or as customized 2.Length:from 5-20Meters as customeized 3.Thickness:2/3/4/5mm 4.Face:PE film,colorful sand,mineral granules and Aluminium Foil anti-sunshine and anti-ageing
1)Thickness :0.2mm,0.3mm, 0.5mm,0.75mm,1.0mm,1.25mm,1.5mm,2.0mm,2.5mm,3.0mm 2) Width : Within 12 m (1m-12m). 3) Length : 50m-100m/roll. 4) Optional surface: Textured or Smooth surface.  5) Color : Black , White , Green and Blue
JUTE MAT 440gsm Jute Matting 450gsm. Roll size 1.83m x 25m. 100% organic and will break down over time, commonly used to protect soils in areas exposed to wind or heavy rainfall. Has a life expectancy varying from 6 - 12 months depending on climatic conditions. Used for the stabilisation of embankments or batters, and inhibit weed growth during the establishment of revegetation.
As two-component polymer water-borne waterproofing coating, it uses high quality polymer emulsion and cement as main raw materials with various inorganic materials and auxiliaries.. Advantage: 1. Strong adhesion. 2. Strong water resistance. 3. Excellent crack resistance. 4. Suitable for multiple environments. 5. Eco friendly. Application: Roof, wall, kitchen, bathroom, balcony, terrace and other non-exposed waterproofing projects. Reference dosage: 1.0-1.4kg/sqm for 1mm coating Specification: 25kg/barrel (emulsion) & 20kg/bag (powder)
It is made of high elastic silicone fluororubber, styrene butadiene, modified emulsified bitumen and acrylic acid. Advantage: 1. Easy construction and excellent overall waterproof effect. 2. Substitute of SBS/PVC waterproofing membrane. 3. Strong bonding property. 4. Eco friendly. Application: Roof, wall, basement, balcony, kitchen and bathroom of various buildings. Reference dosage: 1.2-1.6kg/sqm for 1mm coating Specification: 20kg/barrel
It is a reactive flexible waterproofing coating with isocyanate and polyether as main raw materials and various additives. Advantage: 1. Single component for convenient construction. 2. Long lasting waterproof without addition and emission. 3. Good film extension and high tensile strength. 4. Excellent weather resistance. 5. Eco friendly. Application: Roof, exterior wall, basement, balcony, kitchen and bathroom of various buildings. Reference dosage: 1.3-1.5kg/sqm for 1mm coating Specification: 25kg/barrel
It consists of polymer sheet, polymer hot melt pressure sensitive adhesive layer and isolation film. Advantage: 1. High tensile strength and high elongation. 2. Small size change rate. 3. Good low temperature flexibility. 4. Resistant to plant root penetration. 5. Eco friendly. Application: Basement, roof, air defense, pipe gallery and tunnel. Specification: 1. Thickness: 1.2/1.5/1.8mm 2. Width: 1000/2000mm 3. Length: 20m
Based on SBS modified bitumen waterproofing membrane, it uses butyl and butylbenzene as the self-adhesive material. Advantage: 1. Convenient construction due to cold application. 2. Excellent adhesion to the base. 3. High tensile strength and elongation. 4. Excellent tear and weather resistance. Application: Roof and basement of industrial and civil buildings, municipal engineering, reservoir and swimming pool. Specification: 1. Thickness: 3/4/5mm 2. Width: 1000/2000mm 3. Length: 10m
It uses EPDM rubber resin as the main raw material with vulcanizing agent, accelerator, softener and reinforcing agent. It is suitable for waterproofing projects in a variety of complex environment. Advantage: 1. Easy construction and excellent overall waterproof effect. 2. Strong bonding property. 3. Good solderability and plasticity. 4. Eco friendly. Application: Basement, wall and roof of industrial and civil buildings. Specification: 1. Thickness: 1.2/1.5/2.0mm 2. Width: 1000/2000mm 3. Length: 20m
It uses HDPE as the main raw materials with various additives. Advantage: 1. Excellent flexibility, impermeability and elongation. 2. Good isolation and penetration resistance. 3. Resistant to acid and alkali. 4. Eco friendly. Application: Basement, roof, tunnel, subway, reservoir dam, landfill and sewage plant. â??Specification: 1. Thickness: 1.2/1.5/2.0mm 2. Width: 2000mm 3. Length: 20m
It uses polypropylene and rubber as the main raw material with various anti-oxidants, anti-aging and anti-UV additives. Advantage: 1. Excellent weather resistance, aging resistance, high tensile strength and elongation. 2. Wide temperature range from-40â?? to 100â??. 3. Good solderability and plasticity. 4. Eco friendly. Application: Basement, tunnel, grain depot, subway, reservoir, exposed roof, planted roof and driving roof. Specification: 1. Thickness: 1.2/1.5/1.8/2.0mm 2. Width: 2000mm 3. Length: 20m
It uses PVC resin as the main raw material with a variety of special additives and anti-aging agents. Advantage: 1. High compressive strength, high elongation and small size change in heat treatment. 2. Good low temperature flexibility. 3. The lap side can be welded with high strength. 4. Chemical resistance. 5. Good plasticity. Application: Waterproof and moisture proof works for roof and underground space of various buildings. Specification: 1. Thickness: 1.2/1.5/2.0mm 2. Width: 1000/2000mm 3. Length: 20m
It uses high-quality butimen with SBS thermoplastic elastomer as modification additive and prepared by special technology. There is reinforcment in the middle and covered with various surface materials. Advantage: 1. Excellent low temperature resistance. 2. High tensile strength and elongation. 3. Excellent tear, corrosion and weather resistance. 4. Hot melt construction with reliable and durable seams. Application: Waterproof and moisture proof works for roof and underground space of various buildings. Specification: 1. Thickness: 3/4/5mm 2. Width: 1000/2000mm 3. Length: 10/15m
This type of membrane switch uses silver paste as the upper circuit layer of the switch. By pressing, the center of the silver paste point is connected to the lower circuit to realize the conduction and trigger signal. Through the "die-pressing" , the silver paste disk of the button of the upper circuit is pressed into a certain spherical crown shape with a mold, and a certain elasticity is generated, so that the button can rebound when pressed, and the circuit is turned on or off. It is also obvious enough to feel the switch closed. Bumping of silver paste requires the use of molds, especially batch orders, and the need to customize the bumping molds can greatly improve the production efficiency and the stability of product quality. The die-pressing silver pad can be designed to be 5mm-11mm, and the recommended size is 8-10mm. The button size will be more suitable for finger pressing.
Plug- in-Card membrane switch, It will design colorless transparent window in the graphic overlay, the bottom of graphic owerlay is isolated, then it is ok to plug in the cards from the card slots in the edge side. The membrane switch is the main body, the cards can be designed in various ways, and the cards can be replaced according to actual use, which can be more flexible used. This type of membrane switch is mainly suitable for supermarket electronic weighing devices. In this kind, the Membrane switches can be used repeatedly. Only the graphics and text of the card need to be changed. JRPanel designs key content, color, effect, etc. according to customer needs, The Plug-in-Card Membrane Switch can only change the design of the cards in the future, it can be used more widely.
Waterproof Membrane Switch The waterproof membrane switch can be used in rainy or humid environment with waterproof and moisture proof effect. JRPanel's unique waterproof technology with 3M300LSE adhesive, the waterproof grade can reach IP66. This product is more used in the kitchen and medical ,outdoor devices.
A new type of electronic keypad operating system that integrates key functions, indicator components, and front panels. The membrane switch is composed of six layers: Graphic overlay, upper-adhesive, the upper circuit, the isolation spacer, the lower circuit and the back adhesive. The contact of the upper circuit is downward, and it is in contact with the point of the lower circuit. The circuit contact bounces back after releasing, then the circuit is disconnected and the loop triggers a signal. The Membrane switch has strict structure, beautiful appearance and good sealing. It has the characteristics of moisture resistance and long service life. It has been widely used in electronic communication, electronic measuring instruments, industrial control, medical equipment, automotive industry, smart toys, household appliances and other more fields.
