It consists of polymer sheet, polymer hot melt pressure sensitive adhesive layer and isolation film.
Advantage:
1. High tensile strength and high elongation.
2. Small size change rate.
3. Good low temperature flexibility.
4. Resistant to plant root penetration.
5. Eco friendly.
Application:
Basement, roof, air defense, pipe gallery and tunnel.
Specification:
1. Thickness: 1.2/1.5/1.8mm
2. Width: 1000/2000mm
3. Length: 20m
Advantages of SBS Self Adhesive Waterproofing Membrane 1) Unique self-healing function 2) Strongcohesion with base surface 3) Superiorbond strength between membrane and membrane 4) Excellentelongation that can adapt base surfacedeformation and cracking 5) Simple in construction Application of SBS Self Adhesive Waterproofing Membrane 1. Building roof (Non-outer appearances) 2. Basements, tunnels, pools and other water projects 3. Non-exposed roofing projects that can not use fire to performance
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Based on SBS modified bitumen waterproofing membrane, it uses butyl and butylbenzene as the self-adhesive material. Advantage: 1. Convenient construction due to cold application. 2. Excellent adhesion to the base. 3. High tensile strength and elongation. 4. Excellent tear and weather resistance. Application: Roof and basement of industrial and civil buildings, municipal engineering, reservoir and swimming pool. Specification: 1. Thickness: 3/4/5mm 2. Width: 1000/2000mm 3. Length: 10m
Supplier: Waterproof materials, waterproof membranes, bitumen membrane, PVC, TPO, EPDM, self-adhesive membrane, waterproof coatings, PU liquid, spray polyurea, polymer cement, asphalt shingles
Waterproofing membrane is mainly used in building walls, roofs, tunnels, highways, landfill sites and other places. It is a flexible building material product that can be curled into rolls to resist external rainwater and groundwater leakage. As a non leakage connection between engineering foundation and buildings, it is the first barrier of the whole project waterproofing and plays a vital role in the whole project.
TJ 441 Self-Adhered Polymer Modified Bitumen Waterproof Membrane is based on SBS elastmoeric modified waterproof membrane,laminating with a special PET film,which can be categorized into two types--N and PY. N has PE(Polyethylene),PET,and D(Non-PET film with adhesion in double side);PY has PE,S(sand),AL(Aluminum Foil),D;Its characteristics lie in suitable for wet substrate,no need to find flat substrate and painted surface disposal,free torch heat,integrating with the mortar or concrete perfectly. It's safe and environmental protection. Features: Supreme adhesion integrates with the substrate forever with special patent formula Suitable for various substrates enables to lower resource waste massively and save the cost and time Unique operation craft of wet treatment,free from primer,no need of heat melt Size Available Width-3.28ftï¼?1m Length-32.8ft(10m) 49.2ft(15m)65.6ft(20m) Thickness- N(1.2mm,1.5mm,2mm) G (2mm,3mm,4mm) Packaging,storage and shipping Product is packed into rolls with plastic woven bag Avoid sunlight and rain,store it under current and dry. The temperature should lower than 50 ,putting it upright and keep the story less than 2 TJ-789 TPO Waterproof Membrane TPO Waterproof Membrane takes TPO elastomer as base material,adding fire retardant filling,anti weathering pigment filling,anti oxidization agent and light stabilizer,through high speed mix,melting extrusion,and calendering into waterproofing sheet material. Firstly developed in the early 20 centuries,it is extensively used for rooftop waterproofing projects under the installation of mechanical fasteners. With the combination of the great anti-weathering of EPDM and the weldability of PVC sheet,it defines the leading position in waterproofing industry TPO waterproof membrane has 0% plasticizer and no chloride,generating zero harmful gas when welding Application: Extensively used for the waterproof projects of industrial and residential buildings and public constructions Installation Guide 1. Substrate Requirements: Clean,no bugle and pointy object 2.Installation Steps(Mechanical Fastener) Substrate Clean Pave PE film Pave Insulation board Pre-applied TPO Mechanical Fasten TPO Hot air Welding TPO Detailed Spots Strengthening Test Check 3. Installation 1) Clean the litters,dust on the substrate 2)Pave a layer of PE film,the overlap uses butyl adhesive tape to glue 3)Pave Extruded polystyrene foam insulation board(XPS),using exclusive fasteners to fasten the board 4)Pre-applied TPO membrane: Lay the TPO membrane on the insulation board in accordance with the snap line,paving direction should be perpendicular with the wave of profiled steel sheet,dispose the loose TOP membrane as the outline on the insulation board. Membrane remains flat and even,overlap is 12cm and appropriate trim is needed 5)Fasten the TPO membrane: Align edge of mark line 30mm install the fasteners and elastics 6)Membrane Overlap: One piece membrane laid on the other,use the automatic hot air welding machine to weld 7) Detailed Spots Strengthening: Trim adequate TPO membrane for detailed spots,use portable hot welding machine weld on the TPO membrane 8)TPO membrane edge treatment: Use batten to fasten the edge along with sealants
Jute (including kenaf) was an important foreign exchange earner for the producing countries during '60s. Even during the '70s, jute was an important commodity for most of the producing countries. However, during the '80s, bulk handling techniques and synthetic substitutes entered the market and jute started losing its predominant position in the market.
For your water applications and water animal breeding, you may need PE Water Membrane used for potable water, wastewater, fish and frog raising. Request an online quotation for PE Pond Liners via our E-catalogue: Our PE film: Is flexible, strong & durable film Has elongation under stress to maintain the integrity Resists from puncturing, tearing, or cracking Resists to UV exposure & low and high temperatures Resists rodent & insect attacks We also manufacture Greenhouse Plastic, Ground Cover Film as well as other horticultural films.
It uses polypropylene and rubber as the main raw material with various anti-oxidants, anti-aging and anti-UV additives. Advantage: 1. Excellent weather resistance, aging resistance, high tensile strength and elongation. 2. Wide temperature range from-40â?? to 100â??. 3. Good solderability and plasticity. 4. Eco friendly. Application: Basement, tunnel, grain depot, subway, reservoir, exposed roof, planted roof and driving roof. Specification: 1. Thickness: 1.2/1.5/1.8/2.0mm 2. Width: 2000mm 3. Length: 20m
