Specification SSAW Steel Pipe Process: Spiral Submerged- Arc Welded Steel Pipe Usage: Used for low pressure liquid delivery, such as water, gas, and oil; construction and piling Standard: API 5L, API 5CT, ASTM A252, ASTM 53, EN10217, EN10219, BS 5950, ASTM A572 , JIS, IS, Certificate: EN10217, EN10219, API 5L PSL1/ PSL2, API 5CT Out Diameter: 219.1mm ?3048mm Wall Thickness: 5.0mm-30mm Length: Up to 70m Steel Grade: API 5L: GR A, GR B, X42,X46, X56, X60,X65,X70 ASTM A252 GR 1, GR 2, GR 3 ASTM A53: GR A, GR B, GR C, GR D BS 4360: Grade 43, Grade 50 EN: S275, S275JR, S355JRH, S355J2H Surface: Fusion bond Epoxy coating, Coal Tar Epoxy, 3PE, Vanish Coating, Bitumen Coating, Black Oil coating as per customer?s requirement Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test. Mill Test Certificate: EN 10204/3.1B Wall Thickness ASTM A252 Piling Pipe ASTM A252 Piling Pipe STEEL GRADE ASTM A252 GR 1, GR 2, GR 3 STEEL CHEMICAL COMPOSITION The steel shall conform to the following requirements as to chemical composition: Phosphorus, maximum (%) : 0.050 MECHANICAL PROPERTIES STEEL GRADE Yield strength, min. psi (MPa) Tensil strength, min. psi (MPa) Elongation in 2 in., min. % GRADE 1 30,000 (205) 50,000 (345) 30% GRADE 2 35,000 (240) 60,000 (415) 25% GRADE 3 45,000 (310) 66,000 (455) 20% TEST REQUIRED Chemical Analysis, Mechanical Test, Visusal Inspection , Tension Test, Dimension Check EN10219 Struture Pipe EN10219 Struture Pipe STEEL GRADE EN10219 S235, S275, S355,etc STEEL CHEMICAL COMPOSITION STEEL GRADE % by mass, Maximum C Si Mn P S N S235JRH 0.17 - 1.40 0.040 0.040 0.009 S275JOH 0.20 - 1.50 0.035 0.035 0.009 S275J2H 0.20 - 1.50 0.030 0.030 - S355JOH 0.22 0.55 1.60 0.035 0.035 0.009 S355J2H 0.22 0.55 1.60 0.030 0.030 - S355K2H 0.22 0.55 1.60 0.030 0.030 - MECHANICAL PROPERTIES STEEL GRADE Yield strength, min. psi (MPa) Tensil strength, min. psi (MPa) Elongation in 2 in., min. % Minimum Impact energy KV J at test temperature of -20 0 20 S235JRH 235 360 24% - - 27 S275JOH 275 430 20% - 27 - S275J2H 355 510 20% 27 - - S355JOH 355 510 20% - 27 - S355J2H 355 510 20% 27 - - S355K2H 355 510 20% 40 - - TEST REQUIRED Chemical Analysis, Mechanical Test, Visusal Inspection , Tensile Test, Dimension Check, NDT ,Impact Test
Specification Seamless Steel Pipe Process: Seamless Steel Pipe (SMLS STEEL PIPE) Standard: API 5L, API 5CT, ASTM A106/A53, ASTM A519, JIS G 3441, JIS G3444, JIS G3445 DIN 2391, EN10305, EN10210, ASME SA106, SA192, SA210, SA213, SA335, DIN17175, ASTM A179? Certificate: API 5L PSL1 / PSL2, API 5CT, ISO 9001-2008 Out Diameter: 1/8 ? 36inch (10.3-914.4mm) Wall Thickness: 1.73-40mm Length: Random Length, Fixed Length, SRL, DRL Steel Grade: API 5L :API 5L: GR B, X42, X46, X56, X60, X65, X70 ASTM A53/A106: GR A, GR B, GR CASME SA106: GR.A, GR.B, GR.CASME SA192: SA192ASME SA209M: T1, T1a ASTM A335:P1, P2, P5, P9, P11, P22, P23 ASTM A333:Gr.1, Gr.3, Gr.4, Gr.6, Gr.7, Gr.8, Gr.9, Gr.10, Gr.11 Mill Test Certificate: EN 10204/3.1B Wall Thickness API 5L Line Pipe API 5L Line Pipe STEEL GRADE API 5L PSL1/PSL2 GR B , X42, X46, X52, X60, X65, X70 STEEL CHEMICAL COMPOSITION STEEL GRADE % by mass, Maximum C Si Mn P S GR B 0.28 0.40 1.20 0.030 0.030 X42 0.28 0.40 1.30 0.030 0.030 X46 0.28 0.40 1.40 0.030 0.030 X52 0.28 0.40 1.40 0.030 0.030 X56 0.28 0.40 1.40 0.030 0.030 X60 0.28 0.40 1.40 0.030 0.030 X65 0.28 0.40 1.45 0.030 0.030 X70 0.28 0.40 1.65 0.030 0.030 MECHANICAL PROPERTIES STEEL GRADE Yield strength, min. psi (MPa) Tensil strength, min. psi (MPa) Elongation in 2 in., min. % GR B 245 415 X42 290 415 X46 320 435 X52 360 460 X56 390 490 X60 415 520 X65 450 535 X70 485 570 TEST REQUIRED Chemical Analysis, Mechanical Test, Visusal Inspection , Tension Test, Dimension Check Bend Test , Flattenting Test, Impact Test, DWT Test, NDT Test Hydrostatic Test, Hardness Test..... ASTM A106 Steel Pipe ASTM A106 Steel Pipe Grade and Chemical Composition Grade C= Mn P= S= Si= Cr= Cu= Mo= Ni= V= A 0.25 0.27-0.93 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08 B 0.30 0.29-1.06 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08 C 0.35 0.29-1.06 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08 Mechanical Properties: Grade Rm Mpa Tensile Strength Mpa Yield Point Elongation Delivery Condition A =330 =205 20 Annealed B =415 =240 20 Annealed C =485 =275 20 Annealed
Proudct name:professional production and sales of manufacturers of high strength drill pipe, drill pipe, drill pipe short coat Standard:api spec 5d Grade:e-75 x-95 g-105 s-135 Wall thickness: 7.11 - 10.92 mm
High-frequency welded pipes are generally straight-slit, but straight-slit welded steel pipes are not necessarily high-frequency welded. The high-frequency straight-slit electric resistance welded steel pipe is formed by the skin effect and the proximity effect of the high-frequency current after the hot-rolled coil plate is formed by the molding machine, and the edge of the tube blank is heated and melted, and pressure welding is performed under the action of the pressing roller to realize the production. The high-frequency resistance welded steel pipe is different from the ordinary welded pipe welding process. The weld is made of the base material of the steel strip body, and the mechanical strength is better than that of the general welded pipe. The surface is smooth, high precision, low cost, and has low weld seam height, which is beneficial to the coating of 3PE anti-corrosion coating.
The hot expanded seamless steel pipe is relatively low density but the contraction of the strong seamless steel pipe can be referred to as thermal expansion. The roughing finishing process for expanding the diameter of a pipe by a cross-rolling method or a drawing method. Steel pipe thickening in a short period can produce non-standard and special types of seamless tubes with low-cost and high production efficiency, the current international developments in the field of tube rolling.
Longitudinal submerged arc welded is produced by using a single medium and thick plate as the raw material, pressing (rolling) the steel plate in a mold or forming machine into a tube blank, using double-sided submerged arc welding, and expanding the diameter. The steel plate feed amount can be automatically adjusted according to different steel grades, wall thicknesses, and plate widths. At the same time, the deformation compensation function effectively avoids the adverse effects of mold deformation on the forming and ensures the flatness of the full length of the steel plate during the pressing process. The feeding step is uniform during forming, ensuring the roundness of the tube blank and the flatness of the welding edge. The finished product has a wide range of specifications, and the weld has good toughness, plasticity, uniformity, and compactness. It has the advantages of large pipe diameter, pipe wall thickness, high-pressure resistance, low-temperature resistance, and strong corrosion resistance.
Spiral welded pipe(SSAW pipe, also called HSAW pipe). The pipe is formed by spiral submerged arc welding technology. Spiral welded pipes are formed using narrower plates or hot rolled coils, which lowers their production costs significantly. The welding line is shaped like a helix. The spiral welding process permits the production of large-diameter pipes suitable for transporting large volumes of oil and gas. Some SSAW pipes were historically limited to low-pressure applications.
For water delivery and constrctions
galvanized steel pipe for water delivery and constructions
Welded Pipe For Constructions
We are professional in fabricating various of Perforated Filter Cylinders with high precision perforated metals.Since this plate mesh cylinders are not easy to change shapes,they are widely used in petroleum,chemical,oil cooler,food and pharmacy,etc.
Product : Pipe couplers (Pipe clamp) Steel grade : SPFH540 Size : 48.6*48.6 / 48.6*60.5 / 60.5*60.5 Pipe couplers are our flagship items since Hory has been producing it in 2010. Currently supplying it to several countries as 'Japan', 'Thailand', 'Russia', 'Cambodia', 'Vietnam', 'Philippines' as well as 'U.S.A'.
Product : Steel pipe (Galvanized) Size : 1.8thk, 2.0thk, 2.3thk Pipe is our flagship items since Hory has been producing it in 2010. Currently supplying it to several countries as 'Japan', 'Thailand', 'Russia', 'Cambodia', 'Vietnam', 'Philippines' as well as 'U.S.A'.
#LSAWsteelpipe Here are the LSAW steel pipes that will be ship to the Mexico offshore oil development project. #LSAW #weldedsteelpipe #oiltransport #oilsteelpipe
#Steelpipeexport API 5L ASTM A53 GR.B ERW 8''x0.25''x20'. These ERW steel pipe will be shipping to Chile for energy construction project
The alloy steel pipe widely used in the industry daily manufacturing and transport project. But some people don't know the alloy steel pipe advantages. Click here to know more.
Drilling steel pipe is widely used in energy project drilling. What are the common problems in the construction of ultra-long-distance horizontal directional drills? Here are some tips.
Anticorrosive technology of spiral steel pipe In the process of anti-corrosion spiral steel pipe, there are two-cloth and three-oil anti-corrosion, that is, three times of epoxy coal tar anti-corrosion paint and two layers of glass cloth. People are also used to call three-oil and two-cloth anti-corrosion spiral steel pipe.
#OCTGsteelpipeexport All the standard sizes OCTG with plastic bag package. Their get ready for shipping. For the Oil drilling project in Mexico.
We offer a wide range of sizes, weights, grades, and connections (API, semi-premium, premium, semi-flush, and flush) of #ERW and seamless pipe. #steelpipe, #smlspipe #seamlesspipe #steelfactory #steel
