Seamless Steel Pipe (Hot Rolled / Cold Drawn Process) Size: OD: 13.72 mm - 914.4 mm;  WT: 1.65 mm - 22 mm;  Length: 0.5 m - 20 m Standard & Material: API 5L: GR B, X42, X46, X56, X60, X65, X70, ASTM A53/A106: GR A, GR B, GR C ASME SA106: GR.A, GR.B, GR.C ASME SA192: SA192 ASME SA209M: T1, T1a ASME SA210: GR.A1, GR.C ASME SA213: T2, T5, T9, T11, T12, T22 ASME SA335: P2, P5, P9, P11, P12, P22, P91 Usage: Chilled Water Pipe, Drinking water Pipe, Waste Water Pipe, Structural Tube, Fluid Pipe, Boiler Pipe, Oil and Gas Transportation Pipe, Mechanical Structure Pipe Pipe fittings : Tee, Reducer, Flange, Elbow, cap, weldolet, coupling, sockolet.
Our steel Pipes are supplied and exported by us all over a
Product: ERW (Electric Resistance Welded ) Steel Pipe, HFW Pipe, ERW Black Pipe Application: Used for Oil/Gas/Water transmission,Machinery Manufacturing
EN 10083-2 C45E Carbon Steel Pipes We are suppliers of piping and tubing material that are applicable in industry and construction purposes. EN 10083-2 C45 is a Euronorm Standards Quenched and tempered steels. It is one such variant that delivers different piping requirements in different industries and has proven its worth through its substantial quality and ability to be used in multiple applications. It is easy to spot and distinguish as it has a dull appearance similar to a matte finish. It looks like a cast iron pot and is not shiny. It composition is made of iron and carbon but it has more of carbon content and this higher carbon content gives it unique characteristics, which includes more malleability and durability. It also has a better heat distribution and lower melting point. All these features make it useful in a number of industries and has a number of commercial applications in different industrial sectors.
Chhajed Steel And Alloys Pvt Ltd is a provider of ASTM A672 Carbon Steel Gr CC65 Pipes. Our products are manufactured under strict process control and monitored throughout the production process. At Chhajed Steel & Alloy Pvt Ltd, we manufacture ASTM A672 CC65 specified pipe. Under the standard ASTM A671, the specification requirements are covered for electric fusion welded steel ASTM A671 Gr CC65 EFW Pipe. Welding operations can be carried out on this specified ASTM A671 CC65 Electric Fusion Welded Pipe with the addition of a filler metal. It is important to note that these steel grade ASTM A671 Gr CC65 Cl22 EFW Pipes have been designed to be used for applications involving not only atmospheric temperatures, but also for lower temperature environments.
Unit Pipe Length 6 meter Size/Diameter 150mm Grade C Material Heavy Thickness 6mm Shape Round Brand Apollo Color Silver GI Pipes Galvanised Iron (GI) Pipes are manufactured using mild steel strips of Low Carbon Steel Coils. The strips are passed through a series of fin rolls to give them a circular shape. The slit ends of the strips are then welded together by continuo Additional Information: Delivery Time: 24 Hour
BS EN 10210 Pipe Factory: EN 10210-1, EN 10210-2, S235JRH, S275JOH, S275J2H, S355JOH, S355J2H, S355K2H Steel Pipe, Hot Finished, for Railway Station. Product: EN 10210-1/2 Structural Steel Pipe. Grade: S235JRH, S275JOH, S275J2H, S355JOH, S355J2H, S355K2H. Manufacturing process: Hot finished. Size ranges: Round pipe: O.D 21.3-1219 mm; Thickness: 2.3-25 mm. Square pipe: O.D 40*40 mm-400*400 mm; Thickness: 2.6-20 mm. Rectangular pipe: O.D 50*30-500*300 mm; Thickness: 2.6-23.5 mm. Application: Applied to bridge, railway station, airport, bus station. etc.
ASTM A52 ERW Pipe Company: Cold Drawn ERW Pipe, Hot Dip Galvanized, ASME SA52, ASTM A52, API, BS, DIN, JIS, 1/2-10 Inch, THK 0.5-16 mm, Brown Painting. Product: ASME SA52 ERW Galvanized Pipe. Thickness: 0.5-16 mm. Standard: API, ASTM, BS, DIN, JIS. Material: ASTM A52 or ASME SA52. Finish: Brown painting. Outer Diameter: 1/2-10 IN. Treatment: hot dip galvanized. Length: 5.8, 6 meters. Manufacturing: Cold Drawn.
ASTM B423 Alloy Steel Pipe Supplier: ASTM B423 UNS N08825, N08221, N06845 Steel Pipes, Seamless, OD 1/8-30IN, WT SCH 5S, 10S, 40S, 80S, Cold, Hot Finish. Product: ASTM B423 Alloy Steel Pipe. Grades: UNS N08825, N08221, and N06845. Outer Diameter: NPS 1/8-30IN. Wall Thickness: SCH 5S, 10S, 40S, 80S. Manufacturing: cold and hot finish. Application: Used for general corrosive service.
Types: Galvanized welded steel pipe, galvanized seamless steel pipe Materials: Carbon steel Connection type: threaded Size range:1/8³-36³ Schedule: sch40, sch80, sch120, sch160, XH, XXH Length of the galvanized tubes - in diameter 4 16 mm 6000 + 100 mm - in diameter 18 42 mm 6000 + 50 mm Tolerances of the zinc coated tubes - tolerances of the outside diameter: - diameter between 4 30 mm ±0,08 mm - diameter between 35 38 mm ±0,15 mm - diameter up to 42 mm ±0,20 mm - tolerances of the inside diameter are according to EN 10305-4 - tolerance of the wall thickness ± 10% The Steel grades for the zinc coated tubes E 235+N and E 355+N Building and structural material .Mechanical and general engineering purposes Manufacturing of Bus Body, Railway Boogies In Telephone department as Conduit Pipes Material Inspection (Steel Pipe) Hanging Degreasing Rinsing Pickling Washing Dipping Fluxing Hot Air Drying Inside and Outside Hot-dipped Galvanizing Blow Cooling Passive and Rising Unloading Inspection and Trimming Type Identification Packaging and Storing and Transportation Size: OD: 21.3mm ~ 610mm;WT: 0.5mm ~ 20mm;LENGTH: 0.3mtr ~ 18mtr, Ramdon Length, Fixed Length, SRL, DRL Standard & Grade: GB/T 3091 Q195/Q215/Q235/Q345, BS 1387, EN 39, EN 1139 S235JR/S275JR, ASTM A53 GR. A/B/C, JIS G3444 STK 400/STK 500 Ends: Square Cut/Threaded, Burr Removed
Size: OD: 13.72-4064mm / WT: 1.65-40mm,Length: 0.5mtr-20mtr Standard & Grade : API5L,ASTM A106/A53, DIN2391, ASTM A179/A192, EN10210,EN10208 Ends: Square Ends/Plain Ends (straight cut, saw cut, torch cut), Beveled/Threaded Ends Carbon steel pipe is used for conveying oil , gas and other fluids. Standard: API SPEC 5L,ISO 3183,ASTM A 53M,ASTM A 106M,JIS G 3454,JIS G 3455, JIS G 3456 Standard: API SPEC 5L,ISO 3183,ASTM A 53M,ASTM A 106M,JIS G 3454,JIS G 3455, JIS G 3456 Uses: For conveying gas, water and oil either in the oil or natural gas industries Dimension: SMLS: 10.3~1016 1.7~52mm WELD: 219~2134 5~52mm
Seamless boiler tube and pipe sizes OUTER DIAMETER (OD) 10,2 139,7 mm (from 26.9 mm manufactured as hot rolled) WALL THICKNESS (WT) 0,5 â?? 16,0 mm (from 2.6 mm manufactured as hot rolled) EUROPEAN STANDARDS EN 10216-2, DIN 2448, BS 3059-1, BS 3059-2, BS 3602-1, BS 3604-1, NF A 49-211, NF A 49-213, UNI 4991, STN a �?SN 42 5715, STN a �?SN 42 5716, PN-H 74252 RUSSIAN STANDARDS GOST 8732 AMERICAN STANDARDS ANSI B36.10, ASME B36.10 Steel grades for tubes intended for pressure equipment Steel for pressure equipment, used at higher temperatures â?? Boiler tubes EN 10216-2 P195GH, P235GH, P265GH, 16Mo3, 14MoV6-3, 7CrWVMoNb9-6, 7CrMoVTiB10-10, 10CrMo5-5, 13CrMo4-5, 10CrMo9-10, 25CrMo4, X11CrMo5+I, X11CrMo5+NT1, X11CrMo5+NT2, X10CrMoVNb9-1 ASTM A 106 Grade A, Grade B, Grade C ASTM A 209 Grade T1, Grade T1a, Grade T1b ASTM A 210 Grade A-1, Grade C ASTM A 556 Grade A2, Grade B2, Grade C2 ASTM A 335 Grade T/P11, Grade T/P12, Grade T/P22, Grade T/P24 ASTM A 213 Grade T/P11, Grade T/P12, Grade T/P22, Grade T/P24 Steel for tubes intended for pressure equipment EN 10216-1 P195TR1, P235TR1, P265TR1, P195TR2, P235TR2, P265TR2. ASTM A 53 Grade A, Grade B Steel for tubes made from fine-grained steel EN 10216-3 P355N, P460N, P355NH, P460NH, P275NL1, P355NL1, P460NL1, P275NL2, P355NL2, P460NL2. Steel tubes for low temperatures EN 10216-4 P215NL, P265NL. ASTM A/SA 333 (A999) Grade 1, 3, 6, 7 ASTM A/SA 334 (A1016) Grade 1, Grade 6 ASTM A/SA 524 (A530) Grade II Steel comparison according to DIN and EN standards. The fine-grained steels are supplied in 4 types of qualities. DIN 17179 Type Marking Steel grades Basic StE 255, 285, 355, 420, 460 High â?? temperature WStE 255, 285, 355, 420, 460 Low â?? temperature TStE 255, 285, 355, 420, 460 Low â?? temperature custom EStE 255, 285, 355, 420, 460 EN 10216 â?? 3 Marking Steel grades Basic P-N 355, 460 High temperature P-NH 355, 460 Low temperature P-NL1 275, 355, 460 Low temperature custom P-NL2 275, 355, 460
ASTM A106 Carbon Steel Pipe For High Temperature ASTM A106 / ASME SA106 pipes are seamless carbon steel pipes used for high tempertaure applications (up to 750 degrees F). These pipes are widely used in the oil & gas, petrochemical, power generation and ship-building industries (examples: refineries, downstream plants, vessels. boilers and towers). A106 pipes are particulary suited whenever the trasported fluid has either high temperature or high pressure (or both combined). ASTM A106 / SA106 pipes are available in size range from 1/2 to 28 inches, and in pipe schedules from 10 to 160. These pipes are supplied either in single random lenght (17-24') or double random lenght (36 -44'). In terms of material grades, A106 pipes are manufactured in grade A, B and C. NPS 1-1/2? and below are available in the hot finished or by cold drawn type. Pipes of NPS 2 inch and above are generally are hot rolled manufatured. A106 pipes are produced out of killed steel. The chemical composition and Machanical Property of the three grades of ASTM A106 is shown in the following table: Chemical composition: Chemical composition, % Element C Mn P S Si Cr Cu Mo Ni V max max max min max max max max max A106 Grade A 0.25 0.27-0.93 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08 A106 Grade B 0.30 0.29-1.06 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08 A106 Grade C 0.35 0.29-1.06 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08 Machanical Property: ASTM A106 pipe Grade A Grade B Grade C Tensile Strength, min., psi 48,000 60,000 70,000 Yield Strength, min., psi 30,000 35,000 40,000 Hdrostatic Test of A106 pipes: The hydrotest shall apply a pressure equal to 60% of the minimum yield strenght for at least 5 seconds at atmospheric conditions. The maximum pressure shall not exceed 2500 psi for pipes up to 3 inches, and 2800 for larger sizes. If additional, non standard, tests are executed, the pipe shall bear an "S" mark on each lenght or pipe bundle. Pipe marking:Each lenght of pipe (or bundle for smaller diameters) shall have the following markings applied: Manufacturer name Material grade(ASTM A106 A / B / C ) Diameter and ANSI schedule (from 10 to 160 and XXS) Pipe lenght Heat number Hydrostatic test pressure or NDE Weight / foot
ASTM A106 Carbon Steel Pipe For High Temperature ASTM A106 / ASME SA106 pipes are seamless carbon steel pipes used for high tempertaure applications (up to 750 degrees F). These pipes are widely used in the oil & gas, petrochemical, power generation and ship-building industries (examples: refineries, downstream plants, vessels. boilers and towers). A106 pipes are particulary suited whenever the trasported fluid has either high temperature or high pressure (or both combined). ASTM A106 / SA106 pipes are available in size range from 1/2 to 28 inches, and in pipe schedules from 10 to 160. These pipes are supplied either in single random lenght (17-24') or double random lenght (36 -44'). In terms of material grades, A106 pipes are manufactured in grade A, B and C. NPS 1-1/2? and below are available in the hot finished or by cold drawn type. Pipes of NPS 2 inch and above are generally are hot rolled manufatured. A106 pipes are produced out of killed steel. The chemical composition and Machanical Property of the three grades of ASTM A106 is shown in the following table: Chemical composition: Chemical composition, % Element C Mn P S Si Cr Cu Mo Ni V max max max min max max max max max A106 Grade A 0.25 0.27-0.93 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08 A106 Grade B 0.30 0.29-1.06 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08 A106 Grade C 0.35 0.29-1.06 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08 Machanical Property: ASTM A106 pipe Grade A Grade B Grade C Tensile Strength, min., psi 48,000 60,000 70,000 Yield Strength, min., psi 30,000 35,000 40,000 Hdrostatic Test of A106 pipes: The hydrotest shall apply a pressure equal to 60% of the minimum yield strenght for at least 5 seconds at atmospheric conditions. The maximum pressure shall not exceed 2500 psi for pipes up to 3 inches, and 2800 for larger sizes. If additional, non standard, tests are executed, the pipe shall bear an "S" mark on each lenght or pipe bundle. Pipe marking:Each lenght of pipe (or bundle for smaller diameters) shall have the following markings applied: Manufacturer name Material grade(ASTM A106 A / B / C ) Diameter and ANSI schedule (from 10 to 160 and XXS) Pipe lenght Heat number Hydrostatic test pressure or NDE Weight / foot
MS Pipe & Fitting
Ms Steel ERW carbon ASTM A53 black iron pipe welded sch40 steel pipe for building material Quick Details Place of Origin: China Application: Structure Pipe Alloy Or Not: Non-Alloy Section Shape: round,square,retangular,oval Special Pipe: Thick Wall Pipe Thickness: 0.5 - 12 mm Standard: ASTM, bs, GB, JIS, ASTM A53-2007, ASTM A671-2006, ASTM A53M-2007, ASTM A513-2007, BS EN10219, GB 18248-2000, GB/T 3094-2000, JIS G3452-2004, JIS G3456-2004, JIS G3466 Technique: ERW Grade: 10#, 20#, 45#, 16mn, Q235, Q195, Q215, ST37, ST52, St37-2, ST35, 10#-45#, 16mn, Q195-Q345, ST35-ST52 Surface Treatment: Oiled/Black painting/Galvanized Tolerance: +/-5% Processing Service: Bending, Welding, Cutting, Painting Type: Welded Steel Pipe Product name: Prices Iron Pipe 6 Meter Welded Steel Pipe Erw Black Square Steel Pipe Out diameter: 10X10~400X400mm Length: 1-12m End protector: Plastic Pipe Cap, Threads, Coupling Pipe ends: Plain end Sample: Free MOQ: 5 Tons Payment: L/C, T/T, D/A, D/P, O/A Packing: Steel belt, Plastic Bag+Bundles or others Permanent Steel Manufacturing Co.,Ltd has been committed to being a major supplier of quality kinds of carbon steel pipe, stainless steel tube, hollow section, numerous types of piping equipment including Bend, Cap, Coupling, Elbow, Reducer, Stub End, Tee, Olet, Joint, Gasket, etc.As a factory,which specializing in the production, processing and sales of various steel pipes and pipe fittings size enterprises, headquartered in Hunan, the production base is located in Shandong and Tianjin. So far, the facility occupies more than 228,000 square feet under roof and includes two working mills and quality assurance chemical- and strength-testing laboratories on site and located on a 2,000-acre site with more than 60 acres under roof, is home to one of the world's largest cupolas; and the Contiarc, the first-of-its-kind continuous arc furnace.Our company has imported the advanced productive equipment and the inspection equipment, we will do the UT testing, RT testing on line, and the Hydrostatic testing during the production. 1.Payment terms:20%+80% TT,100% LC after sight 30-180 days,O/A (Open terms),D/P etc. 2.Quality assurance :We have agents, distributors and authorized partners in more than 80 countries and 140 cities around the world. Any problems about quality, logistics, after-sales within two years, we will help customers deal with and negotiate 24 hours unconditionally and be responsible for all after-sales problems. 3. Certificate of origin:Either from our Singapore base or China to avoid your anti dumping ,if any 4. Other Certificates:API,ISO,CE,EN10204 3.1/EN 10204 3.2,LOADING REPORT/INSPECTION for Free. 5.Biggest advantages:We have invested independent raw material mill
Square tube carbon steel pipe black hollow section carbon steel Q235 square metal tube Grade: A53/ A106/ ASTM252/ ST37 Product Name Carbon Steel Pipe Material A53 Gr.B,A36,ST52,ST35,ST42,ST45,X42,X46,X52,X60,X65X70 Standard API 5L,ASTM A106 Gr.B,ASTM A53 Gr.B,ASTM A179/A192,ASTM A513,ASTM A671,ASTM A672,BS EN 10217,BS EN10296,BS EN 39,BS6323,DIN EN10217 Certificates API 5L,ISO9001,SGS,BV,CCIC Outer Diameter 15mm-1200mm Wall Thickness SCH10,SCH20,SCH30,STD,SCH40,SCH60,SCH80,SCH100,SCH120,SCH160,XS,XXS Length 1m,4m,6m,8m,12m according to buyer's request Surface Treatment black paint,varnish,oil,galvanized,anti-corrosion coated Marking Standard marking,or according to your request.Marking Method:Spray white paint End Treatment Plain End/Bevelled End/Grooved End/Threaded End With Plastic Caps Technique Hot Rolled or Cold Rolled ERW Application Liquid delivery,structure pipe,construction,petroleum cracking,oil pipe,gas pipe Permanent Steel Manufacturing Co.,Ltd has been committed to being a major supplier of quality kinds of carbon steel pipe, stainless steel tube, hollow section, numerous types of piping equipment including Bend, Cap, Coupling, Elbow, Reducer, Stub End, Tee, Olet, Joint, Gasket, etc.As a factory,which specializing in the production, processing and sales of various steel pipes and pipe fittings size enterprises, headquartered in Hunan, the production base is located in Shandong and Tianjin. So far, the facility occupies more than 228,000 square feet under roof and includes two working mills and quality assurance chemical- and strength-testing laboratories on site and located on a 2,000-acre site with more than 60 acres under roof, is home to one of the world's largest cupolas; and the Contiarc, the first-of-its-kind continuous arc furnace.Our company has imported the advanced productive equipment and the inspection equipment, we will do the UT testing, RT testing on line, and the Hydrostatic testing during the production. 1.Payment terms:20%+80% TT,100% LC after sight 30-180 days,O/A (Open terms),D/P etc. 2.Quality assurance :We have agents, distributors and authorized partners in more than 80 countries and 140 cities around the world. Any problems about quality, logistics, after-sales within two years, we will help customers deal with and negotiate 24 hours unconditionally and be responsible for all after-sales problems. 3. Certificate of origin:Either from our Singapore base or China to avoid your anti dumping ,if any 4. Other Certificates:API,ISO,CE,EN10204 3.1/EN 10204 3.2,LOADING REPORT/INSPECTION for Free. 5.Biggest advantages:We have invested independent raw material mill
1.Description 2.Tolerance on OD and WT 3.Size 4.Our Service 5.Package 6.Factory show 7.Projects 8.Quality Control 9.Related products 10.About us Permanent Steel Manufacturing Co.,Ltd has been committed to being a major supplier of quality kinds of carbon steel pipe, stainless steel tube, hollow section, numerous types of piping equipments including Bend, Cap, Coupling, Elbow, Reducer, Stub End, Tee, Olet, Joint, Gasket, etc. The Products from Permanent Steel Manufacturing Co.,Ltd are supplied in accordance with appropriate International Standards as well as Customer Specifications in a large variety of steel grades and dimensions. Permanent Steel Manufacturing Co.,Ltd on a 250,000 m2 area and has three production units: Foundry, Rolling and Extrusion mills. Permanent Steel Manufacturing Co.,Ltd operates under strict quality, environmental, as well as health and safety management systems, in compliance with ISO 9001, ISO 14001 and OHSAS 18001 standards.
1. China supplier hot dip galvanized steel seamless pipe and tube Description of API 5L Grade B Carbon Steel tube supplier 7.Related products 8.Our some project 9.Permanent Steel Manufacturing Co.,Ltd has been committed to being a major supplier of quality kinds of carbon steel tube, stainless steel tube, hollow section, numerous types of piping equipments including Bend, Cap, Coupling, Elbow, Reducer, Stub End, Tee, Olet, Joint, Gasket, etc. The Products from Permanent Steel Manufacturing Co.,Ltd are supplied in accordance with appropriate International Standards as well as Customer Specifications in a large variety of steel grades and dimensions. Permanent Steel Manufacturing Co.,Ltd on a 250,000 m2 area and has three production units: Foundry, Rolling and Extrusion mills. Permanent Steel Manufacturing Co.,Ltd operates under strict quality, environmental, as well as health and safety management systems, in compliance with ISO 9001, ISO 14001 and OHSAS 18001 standards. 10.Our sales team 13.
Model: GJZ (y) 50 (120m) Main Technical Performance of Production Line 1.Overview: the production line is to produce diameter 19 50mm, wall thickness 0.7-2.0mm, special equipment for high-frequency Longitudinal Welded Pipe and corresponding square pipe and special-shaped pipe. The equipment composition is from feeding to cutting and blanking, and the pipe making speed is adjusted accordingly with the change of pipe making specification. 2.Raw Materials: the applicable strip steel materials are hot-rolled or cold-rolled, pre galvanized strip steel coils such as ordinary carbon steel Q195 and Q235 (in accordance with GB700-88 or gb1591-88) 3.Production Capacity: Pipe Making Range NO. Project Numerical Value Remarks 1 OD of round pipe19mm 50mm 2 Wall thickness of round pipe 0.7mm 2.0mm 3 Size of square pipe 15 1 40 40mm  4 Thickness of square pipe 0.7mm 2.0mm  5 Size of square pipe 10 30 30 50mm  6 Thickness of square pipe 0.7mm 2.0mm  7 Speed of pipe making 30M/min 120M/min 8 Length of pipe making 4M 8M 4.Strip Steel Specification (raw material): the applicable strip steel materials are hot-rolled or cold-rolled strip coils of ordinary carbon steel Q195 and Q235, pre galvanized strip steel, etc. No. Projects Numerical Value Remarks 1 Thickness of steel strip 0.7 2.0mm 2 Width of steel strip 60 160mm 3 OD of steel coil 800mm 1500mm 4 ID of steel coil 450mm 550mm 5 Maximum coil weight 2000kgs 5.Square Pipe Production Mode: round to square, angle out 6.Unit Production Mode: continuous 7.Unit Operation Direction: left or right (determined by the process layout of the user's workshop) 8.Bottom Line of Pipe Making: + 760mm (can also be customized according to customer requirements) 9.Welding Mode: high frequency induction welding, 200KW. 10.Speed of Pipe Making: 30-120m / min 11.Total Power of Production Line: 430KW
