Product DescriptionWe are a leading Suppliers GP Plus, BSealant, GP Silicone Sealant is a high-quality,elastical one-component joint sealant based onsilicones.Characteristics:- Very easy application- Permanent clear, UV-resistant- Stays elastic after curing- Very good adhesion on many materials- Typical acetic smell- General sealing for automotive applicationsApplications:Building- and construction jointsGlazing and connection jointselastic joints in coldstore and container applicationsSealings in air condition systemsGeneral sealing for automotive applications.
euroking weatherproofing silicone sealant 789 A one part, neutral cure, architectural grade sealant designed for general weathersealing. It easily extrudes in any weather an quickly cures at room temperature to produce a durable, flexible silcone rubber seal.
Features:
Fire resistant sealing and filling of joints and seams or in certain areas where fire resistance is required. Fire resistant tested according to EN 1366-4 until 60 minutes in a gap of 20mm wide. Combine with Silicone Sealant until 180 minutes in a gap of 40m wide. Ensure that you choose the correct fire resistance for your application by consulting the classification and test reports.
FEATURES
Waterproof and Plugging Spray is specially designed for waterproof repair products for pipe roots, nozzles, corners, cracks, slotted wiring and weak leak points in waterproof construction. It is easy to operate and suitable for painting tools that are difficult to reach narrow and complex spaces. This product is professionally designed with anti-corrosion and anti-rust functions .
APPLICATION
1.Leakage plug of family toilets, kitchens, pipes, and walls.
2.Rush repair and leak plugging of building construction projects, rapid repair of roads .
3.Emergency repair and plugging of civil air defense or tunnel engineering .
4.Quick repair of prefabricated components in prefabricated pipe component factories .
5.Emergency repair and water supply engineering of pipe joints of water supply companies .
6.Leakage plug of building floor, basement and other building projects.
High Tempreture Silionce Sealant
Formulated In The USA
Manufactured In The Sultanate Of Oman
Take Above 280 Celcious Tempreture
GROSS WEIGHT 330GMS
Gasket Maker
Butyl Caulk Sealant is a neutral sealant compose of single butyl rubber with excellent properties of anti-aging/corrosion/oxidation, water resistance, tightness; wide range stretch of deformation and crack especially under low temperature circumstance.
Application:
Applies to all kinds of seams, holes and cracks in steel roofs; sun panels; windows and doors.It is also used widely for the car industry.
Tech Data:
Solid: 83%
Gravity: 1.4 0.1g/cm3
Service Temperature: -40 to 180
Lifetime: 20 years
Viscosity: 1800 300 dpa.s
UV Resistance: 2000 hours
Size: 300mL/cartridge or 25kg/drum
Introduction:
Homey p35 polyurethane sealant for construction, is one-part room temperature moisture
Curing polyurethane with high adhesion strength, aging resistant, vibration exhaustion resistant,
Low, temperature resistant and free-corrosive properties, is excellent where gap filling requirements are needed.
Typical uses:
, precast panel, wood, aluminium
, pvc joinery seams
, curtain wall, bakes clay and concrete roof tiles
Cas no.:, 9009-54-5
Other names:, pu adhesive sealant
Mf:, mixture
Einecs no.:, 230-391-5
Place of origin:, china(mainland)
Classification:, other adhesives
Main raw material:, polyurethane
Usage:, construction, woodworking, other
Brand name:, homey
Model number:, p35
Type:, polyurethane sealant
Component:, one component
Hs code:, 3506100010
Curing system:, moisture
Volume:, 310ml
Color:, white, grey, black
Performance:, low temperature resistant, vibration ehaustion, anti-aging
Oem:, available
Price:, negotiable
Shelf life:, 9months
Storage:, store at 25, , or below
Packaging details:, 310ml;24pcs/ctn
20' container 24pcs/ctn, 2000 cartons without pallet, 1440 with pallet
Anti-fungal GP silicone sealant bathroom using silicone sealant is a one part, fast curing and permanently flexible silicone sealant; it has excellent waterproof performance, the sealant also is also a type of anti-fungal able to use in bathroom and kitchens. It has excellent tensile and compression restoring ability. It has strong adhesion to glass, PVC, ceramic, concrete, wood, metal, tiles, vinyl and most building material.
Use: For sealing, repairing, glazing and mending of bathtubs, shower stalls, bathroom vanities, kitchen counters, aquarium, auto windscreen, glazing for window panels, wood or metal frameworks bonding, sealing air-conditioning systems, draught proofing, skylights, port lights, back lights etc.
Acetic gp silicone sealant is one-part room temperature acetoxy silicone sealant. It has excellent weather ability, waterproof and good adhesion to most construction materials. It is suitable for sealing, repairing, glazing and mending of glass, auto windscreen, glazing for window panels and other general building materials bonding.
Description
Our insulating glass silicone sealant is a neutral curing silicone sealant with high modulus and high strength, purposely designed for glazing insulating glass. It has the advantage of low air permeability. Our insulating glass silicone sealant works with two-component mixing equipment and the two components react quickly after mingled in scale, then cures to elastomer.
Applications
As a secondary edge adhesive sealant in insulating glass units.
White color
1. Application
*Sanitary sealing around sinks, tubs, urinals and wirlpools
*Sealing for kitchen, skirting lines, furniture, ceramic tiles.
*Sealing for windows and doors with anti-mildew requirements.
2. Product features
*One component, excellent extrusion, easy to use
*Excellent mildew resistence standard
*Ecofriendly with low VOCs
*Resists staining, spotting, and color changes
3. Packing specification
*Cartridge: 240ml/260ml/280ml/300ml
*Sausage: 590ml
1. Application
* Suitable for construction&home decoration
*Sealing for window frames and glazing, architraves, etc.
*Applicable to fish tank sealing
2. Product Features
*One component, excellent extrusion.
*No-sag, ready to use
*Good adhesion to a broad substrate range such as glass, upvc, etc.
3. Packing Specification
Cartridge: 240ml, 260ml, 280ml, 300ml
Application:
Suitable for all kinds of glass curtain wall, sunroom, high-grade doors and windows, weather-resistant seal. Also suitable for sealing and bonding of solar cell installations.
Features:
1) One-component, excellent extrusion.
2) No sagging, easy for construction.
3) Good adhesion to large substrate.
4) Good weather resistance and UV resistance.
5) Implementing standard GB/T 14683-2017, 25HM
Application:
Suitable for sealing of various installations of windows and doors.
Features:
1) One-component, excellent extrusion.
2) No sagging, easy for construction.
3) Good adhesion to large substrate.
4) Good weather resistance.
5) Implementing standard GB/T 14683-2017, 25HM
Acrylic sealant is a one component, paintable and flexible, mildew resistant acrylic sealant formulated for sealing of gaps and joints where slight movement or vibration causes conventional, non- elastic fillers and putties to crack and fall out. It had good adhesion to most porous surfaces without primer and is economy yet environmental friendly that can be cleaned up with water.
CHARACTERISTICS:
1.Excellent flexible.
2.Paintable.
3.Ready to use.
4.It can be cleaned with soap and water.
5.Durable waterproof and anti-mildew.
6.Non slump - can be applied to vertical surface.
7.No pollution and low odor.
8.It can be used indoor decoration and construction purpose.
MAIN USE:
For caulking, sealing and decoration uses in waterproofing, gap filing, wood frame joints, doors & windows sash, drywall, plaster,marble, tile & brick works, painters sealant for interior works.
COLORS:
White, black, grey and other colors based on customer's requirement.
PACKING:
It is available in 300ml disposable plastic cartridges, and 590ml sausages.
STORAGE:
When stored at 27 or lower temperature in the original unopened container, it has a shelf life of 9 months from the date of manufacture.
MAIN USE:
1.Specially used for windshield and side glass of bus, car, railway vehicle (metro, high-speed rail), ship, spaceflight, engineering machinery vehicle, carriage and special vehicle.
2.For glass steel and plastic accessories (car roof, side body and car front).
3.For metal, plastic, and glass which requires high tensile strength and elasticity, the bonding can bear high mechanical deformation force.
CHARACTERISTICS:
1.One component formulation.
2.Modest hardness after curing.
3.Flexible, durable and excellent extruding performance.
4.No need primer to glass.
5.No sagging, no pollution and corrosion to base material and environment.
6.Excellent sealing performance, excellent water and aging resistance.
PACKING:
It is available in 300ml cartridges, and 590ml sausages.
COLORS:
Black & other OEM colors.
STORAGE:
When stored at 25 or lower temperature in the original unopened container, it has a shelf life of 12 months from the date of manufacture.
Neutral silicone sealant
1.Manufacturer of silicone sealant in over 15years.
2.We insist on good quality with competitive price to make clients satisfied.
3.Final price will be determined by more details confirmed.
4.Free samples available,delivery cost is to be paid by clients.
5.OEM/ODM available.
6.Health and safety considerations
7.LT: 7-15days.
CHARACTERISTICS:
1.Good weather resistant ability.
2.One-component,moisture curable,excellent thixotropy,easy to apply.
3.Persistent water proofing.
4.Good adhesion, excellent adhesion to most building materials.
MAIN USE:
It's suitable for the sealing of the joints of all kinds of architectural doors and windows, and the assembly and sealing of doors and windows glass. Not suitable for structural bonding.
COLORS:
Clear, white, black, grey and other colors based on customer's requirement.
PACKING:
It is available in 280mm and 300ml disposable plastic cartridges, and 590ml sausages.
TRANSPORTATION:
This product is transported by non-dangerous goods.
STORAGE:
When stored at 27 or lower temperature in the original unopened container, it has a shelf life of 12 months from the date of manufacture. INT-795 clear sealant has a shelf life of 12 months from the date of manufacture.
512 Silicon Sealants Suppliers
Short on time? Let Silicon Sealants sellers contact you.
