MPS-31, defoamer is water-dilutable silicone emulsion containing silicone 30% active defoamer. Silicone mps-31 defoamer, it is formulated with carefully selected ingredients, which, at the prescribed level, are suitable for use in all industry 31 defoamer has excellent emulsion stability. Even diluted emulsions need only an occasional stirring to remain dispersed.
It is a kind of fast acetic curing( based on polysiloxane), anti-fungi silicone sealant, which cures with atmospheric moisture to foam a high strength rubber seal with excellent adhesion to many surface such as glass, glazed surfaces, metals, most plastics, tiles, wood, concrete etc. GORVIA silicone sealant has excellent physical properties that are designed to provide outstanding durability and excellent UV resistant and weather resistant performance, multi-purpose and ready-to-use.
It is based on moisture curing polyurethane, containing safety propellant, is used to seal gaps and crevices with very high expansion yield UP TO 65 LITERS, the post-expansion is quite low to prevent deformation. The foam that dispenses from aerosol can is moisture cured and draws humidity from the air for pipes, windows and doorframes. Foam can be cut once fully cured, provides excellent bond to lumber, plywood, concrete, metals, masonry and other substrates.
GS-Series N302R is a Neutral Cure GS-Series N302R (non-acid, based on polysiloxane), single component silicone sealant with High tensile strength, high modulus, it is sag resistant and rainwater accessories and will not corrode zinc or zinc/aluminum galvanized steel. It has excellent physical properties that are designed to provide outstanding durability and excellent UV resistant and weather resistant performance, multi-purpose and ready-to-use.
We can supply A grade 156 mm Mono and Multi crystalline silicon solar cells (3.8W-4.0W,efficiency 16.6%) with high quality and best price for large quantity.For specifications,price and futher information,please freely contact us through email.
512 Silicon Sealants Suppliers
Short on time? Let Silicon Sealants sellers contact you.
We can supply 156 mm Mono and Multi crystalline silicon solar wafers (A grade) with high quality and best price for large quantity.For specifications,price and further information,please freely contact us through email.
Withstand temperature up to 650F(34C)
The surface drying time is 2-5mintues
Suitable for all vehicles & make any gasket instantly
Low volatile & valve covers
Intake manifold
Oil pump flanger
Transmission
Water pump.
25gm, 50gm, 70gm 85gm, 100gm, alum blister tube.
15gm, 32gm, 50gm, 70gm, 85gm, 100gm, 300ml tube with box or tube with blister card.
All the shapes of rubber seals can be able to be extruded,including D section,P sections,E section, L section,U- channel,bubble section,key-hole section,triangle sections,etc ,or custom rubber seal.
Material could be in EPDM Rubber,Silicone rubber,Viton Rubber,Foam rubber,PVC,TPE,etc.Co-extruded rubber seals can be available.
Superior adhesion on glass, vitrified surfaces, ceramic tiles, most woods, many plastics, most paints and for Do-It-Yourself applications (car, boat, caravan, house etc.).
Ready gunnability at low (+5ªC) and high (+40ªC) temperatures
Superior flexibility at low (-50ªC) and high (+100ªC) temperatures
Colors Available :Grey, white, black and clear.
Product Data (Uncured)
Density at 25ªC (Method - ISO 1183-1 A) - 0.98~1.05g/ml
Skin forming time at 23ªC/50% r.h. v 25 minutes
Consistency (Method - ISO 7390, Profile U 20) v Non-sag
Extrusion rate at 23ªC (Method - PV 08127) v 800 ml/min.
Product Data (Cured) after 4 weeks¦ storage at 23ªC/50% r.h.
Tensile strength (Method - ISO 8339) v 0.6N/mm2
Hardness shore A (Method - ISO 868) v 18
Elongation at break (Method - ISO 8339) v 200%
Modulus at 100% elongation (Method - ISO 8339) v 0.36 N/mm2
Tear strength (Method - ISO 34, method C) v 4.0 N/mm.
24 cartridges in one box.
1 x 20' will accommodate 2000 cartons.
G1200 Silicone Sealant is a one-component sealant of high modulus, moisture curing, weatherproof, waterproof, low temperature resistant and anti-aging properties. It can be used for assemble and replacement of windshield glass, back window glass and side window glass for automobiles.
The brand KNG 995 structural silicone sealant is mostly used for bond and seal of structural device for glass curtain wall, aluminum curtain wall, stone curtain wall, lighting top and metal constructional engineering. It can be used for the second seal for hollow glass and seal for industry.
The brand kng 995 structural silicone sealant is mostly used for bond and seal of structural device for glass curtain wall, aluminum curtain wall, stone curtain wall, lighting top and metal constructional engineering. It can be used for the second seal for hollow glass and seal for industry.
KNG+ 7132 is an acetoxy curing 100% silicone sealant, which has perfect adhesion with glass and has been especially formulated for glazing and aquarium construction. It can be widely used on windows frames, glass aquariums, repairs gaskets in dryers, ovens, refrigerators and washing machines and repairs rips in awnings.It will not adhere to concrete, cement products, zinc or copper containing metals, marble, limestone or lead and can not be painted over. It is also not suitable for use on oily woods such as cypress, teak or cedar and not suitable for use on roofs and gutters as it will cause corrosion. when used on polyethylene, polypropylene or Teflon, Pre-test plastics is necessary.
Features:
Superior adhesion on glass and glazing surfaces
UV and weather resistant remaining flexible, not shrinking, cracking or drying out
High-Temperature resistance - approximately -40+C +120+C
Superior flexibility +25% joint movement capability & up to 600% Ultimate elongation.
Makes leakproof joints in gear & crank cases,
Manifolds, cylinder heads and radiator hose connections.
Bond will not be permeated by water, oil, gas or anti-freeze
Brush-on sealer for paper, cardboard, and felt gaskets
Fast drying, hard setting
Resists most petroleum products and shop fluids.
RTV Silicone anti-mildew sealant is used as general adhesive/sealant indoor and outdoor, suitable for:
1. Kitchens, baseboards, walls and tiles,sinks(washbasin), bathtub, closet combination and cracked places
2. Showers, lavatories, bathtubs and floors
3. Bathroom fixtures, fiberglass spa units
4. Refrigerator and freezer liners (however, not FDA-approved for food-contact application)
5. Sealing, bonding and repairing other construction materials including aluminum,marble and coated glass
6.Automobile sound proof, dust and water insulating.
280 or 300ml/pc,plastic cartridge
24 pcs/case
OUTER CARTON MEAS. 31X20X24cm
ONE 20'GP CAN CONTAIN 1900 CTNS.
CAS NO: 63148-57-2
Apperance & Property:Colorless transparent liquid
Hydrogen Content (%):1.58-1.60
Viscosity (25 C, mm 2/S): 20.00-30.00
Flash Point C: 120 C
Volatile Component%: 3.00
Packing & Transportation: 200L per plastic barrel/ iron barrel 1ton IBC stored in a cool,ventilated warehouses.Away from fire and hot sources. Require sealed packing. And the temperature of warehouse should not be more than 30ípC. Prevent from direct sunlight.
