Digital security monitoring system, smart home system.
Blackbox.
Network camera.
Eas & accessories, mobile security display unit, RFID label & system, ip security monitoring.
Security products.
Security products, passage control system products.
Binoculars, night vision.
Signal jammer.
Access control system products.
Safety case.
Packaging, document solution, proximity card, security document, non document security, debet card, identity card.
Fiber Perimeter Intrusion Detection Systems PIDS, or Perimeter Intrusion Detection System, is an effective solution designed to detect unauthorized access or intrusion attempts at the physical boundaries of a facility, such as a building, industrial site, military installation or other sensitive area. Protect and secure your premises before intruders enter the property by installing security sensors in the perimeter area. Benefits of PIDS 1. Detect intruders early in an intrusion The perimeter is the first point of entry to the site. By detecting intruders at the perimeter, it is possible to respond as early as possible before the intruder reaches the building. 2. Improve security quality and reduce human error Many sites have perimeter security with only security guards or security personnel and surveillance cameras (CCTV). It is difficult for security personnel, especially those responsible for large premises, to see everything without overlooking emergencies and always responding immediately. There is also the possibility of human error. And monitoring often becomes lax when security guards are working shifts. Security sensors reduce human error, such as neglect, and work 24/7 to maintain the same quality of security. 3. Improve security efficiency and take immediate action in case of intrusion By dividing the perimeter into zones and installing security sensors in each zone, it is possible to identify where intrusions are occurring. In addition, by integrating the security sensors with the surveillance camera system, when the sensors detect an intrusion, they will trigger the linked cameras to perform actions such as real-time pop-up or PTZ camera control on the screen in the surveillance room. On-site security personnel can then act quickly by dispatching security guards for on-site inspection, alarming the police/owner or issuing voice warnings remotely. It realizes operational efficiency for reliable response in emergency situations. 4. Long-term fixed cost savings Increasing security costs year after year is a problem for which a solution must be found. Hybrid security using the PIDS solution can reduce long-term security fixed costs by replacing some of the security guards with alarm systems (security sensors).
Type Fabricated Material Stainless Steel Thickness 55mm Color Grey,Grey Feature Accurate Dimension Position Exterior Finishing Polished
Radiation Detectors A radiation detector is a device that measures nuclear, electromagnetic, or optical radiation. Nuclear radiation detectors identify nuclear radiation by measuring the emission of ionizing radiation of alpha particles, beta particles, and gamma rays. A nuclear radiation detector, also known as a Geiger counter, consists of two main components: the processing electronics and the Geiger tube. Geiger tubes are filled with low-pressure inert gases such as helium, argon, or neon. If radioactive radiation occurs, the noble gases become ionized. An anode inside a Geiger tube records the number of ionized particles that is numerically related to the intensity of radioactive radiation. The radioactivity measurements are then displayed on the LCD screen of a Geiger counter or nuclear radiation detector. Measuring nuclear radioactivity and classifying nuclear radioactivity values is very important. For example, terrestrial gamma radiation is typically measured at 0.03 - 0.3 �µSv/h (microsieverts per hour). This "normal" range of oscillations is determined by naturally occurring radioactive elements in the ground, such as uranium and potassium. To calculate this factor, cosmic radiation must be taken into account. For example, taking cosmic radiation into account, the maximum radioactivity content at the Schneefernerhaus, Germany's highest environmental research station, is equal to approximately 110 �µSv/h. At PCE Instruments you will find three types of Geiger counters or nuclear radiation detection equipment to help you measure radioactivity: 1) alpha radiometers, 2) meters for detecting alpha, beta and gamma radioactivity, and 3) wearable Radioactive meter on the body.
Supply UAV jamming accessories Jamming module-unit price is between US$50-1200, excluding international shipping costs. Jamming antenna-unit price is between US$25-80, excluding international shipping costs.
Golf Course Perimeter Protection System Golf course security teams need to protect the course from theft, vandalism and intruder threats. Protecting a golf course can be a complex issue because of the size of the golf course; it is difficult to monitor the entire area all the time. Another challenge in protecting a golf course is that the power supply does not reach every point on the perimeter, which forces limitations on the types of security measures that can be taken. Most golf clubs protect the main building and entry points; however, due to the large size of the golf course, intruders can enter through any number of entry points. The Raycom golf course perimeter protection system is an outdoor ground security system that can be integrated with any existing security system, burglar alarm or CCTV system. Raycom's ground sensor technology consists of 4 or 8 sensing units (geophones) and analyzers. Raycom stand-alone buried seismic detectors are installed underground and are capable of recognizing footsteps and vehicle movement. The system is designed to pick up only safety-related vibrations; it does not sense earthquakes. Raycom golf course perimeter protection system is a perimeter ground system that is resistant to extreme environmental conditions such as weather and temperature changes, and can operate in a variety of terrains undisturbed by vegetation or strong winds. In contrast to other technologies such as leaky coaxial RF, Raycom seismic detectors can work on any ground without preparation or any special conditions. The system has been developed to the highest standards and does not require any maintenance to operate.
Our organization is engaged in offering a wide range of Automatic Swing Gate. All the swing gates offered by us are developed and designed using superior grade raw material in accordance with industry laid norms and guidelines. These automation swing gates are widely used in houses, offices and gardens. Further, our entire range is stringently tested on the basis of well defined quality parameters so that only high quality material is delivered at clients location within the scheduled time limit. Features: Open and close single or both the gate by remote control. With 1 point for light to be operated with same remote. Can be integrated with most of access control system (RFID, Biometric etc) Can be paired with upto 50 remote to operate the swing gate operator Safely 12volts DC motors eliminating the dangers of electric shock hazard. Overload sensor provide instant stop upon contact with obstacle. Rechargeable back-up battery for 42 hours or 30- cycles when power failure. Remote control transmitter and receiver with code encryption technology. Soft start and stop. The Swing arms are installed above the ground, eliminating common problems of water getting into the motors like underground motors have. It provides multiple mounting choices (swing in/out) Weather resistant housing (IP 54 Protection) Optional Features: Mobile App based barrier Open/ Close- Bluetooth Technology GSM based remote mobile app/ SMS/ Missed Call barrier Open/Close Long Rangle Vehicle identification and barrier Close/ Open- No waiting in queue.
Perimeter Detection Systems Raycom utilizes Perimeter Intrusion Detection Systems (PIDS) to ensure organizations are completely secure and help reduce operational risk. As threat levels continue to increase, it is becoming critical for organizations to properly protect their assets. This starts at the perimeter of their sites, and there has never been a more important time to deploy a robust, reliable and secure detection strategy to reduce operational risk. Timely and highly accurate location information about potential intruders ensures a quick and appropriate response to minimize damage. Ensure that your perimeter intrusion detection system is fully integrated into your security solution, providing real-time data. Thus creating the ability to track and respond to intruders. Fiber optic technology is fast becoming the technology of choice. Especially for organizations looking to deploy a cost-effective, reliable solution and significantly reduce the entire lifecycle cost of ownership. Raycom's family of advanced fiber-optic intrusion detection solutions provides covert buried and fenced or wall-mounted detection through a single detection unit. With fully scalable systems for sites ranging from less than 5 kilometers to more than 100 kilometers, Raycom has a solution for you. Resistant to cable cuts and vandalism All Raycom PIDS detection units are available in 1-channel or 2-channel models. 2-channel models will continue to provide uninterrupted detection along the perimeter. This is true even if the cable is cut or damaged. Lower cost of ownership Overall lower installation and maintenance costs compared to alternative technologies. In addition, no power supply is required on site. Minimize nuisance alarms Utilizing artificial intelligence technology, our market-leading detection algorithms are able to develop acoustic fingerprints of different events. This allows differentiation between genuine security risks and irrelevant ambient noise Multiple fence types Due to its unique configuration capabilities, the Raycom solution is suitable for every fence type without compromising location accuracy or event categorization capabilities. Positioning accuracy Advanced signal processing technology combined with intelligent algorithms can quickly and accurately identify the exact location of a potential threat within �±5m. Integration Our advanced software seamlessly integrates with a wide range of commonly used third-party systems. This provides operations teams with real-time information from a range of devices through a single interface. Covert Buried Detection Our buried solutions are fully covert and can detect people and vehicles long before they enter the site, ideal where there is a lack of physical boundaries.
We have established ourselves as renowned organization, involved in manufacturing, supplying and trading a wide gamut of Barrier Gate. These barriers are manufactured using high grade raw material which we procure from certified vendors of the market. All the barriers offered by us are designed in compliance with international quality standard norms. Due to various excellent features such as low maintenance and high durability, our entire range of road barriers are widely demanded by our valuable clients and corporates. Features: Resistant to heavy impacts and shocks High flexible performance Effective Shield Safe and Secure features Optional Features: 1. Mobile App based barrier Open/ Close- Bluetooth Technology 2. GSM based remote mobile app/ SMS/ Missed Call barrier Open/Close 3. Long Rangle Vehicle identification and barrier Close/ Open- No waiting in queue.Boom Barrier
Home Office Restaurant Cordless Wireless Fire Smoke Detector: Our company has gained name and fame for offering Smoke Detector to the clients. This product is can easily detect particles of smoke that are too small to be visible. This product can detect smoke into the open chamber and in small office and homes. This product can transmit information to control panel, which helps in detecting the area affected by fire. Features: Quality-approved High smoke sensitivity Advanced detection
