Description: the natural rubber sheet, gum rubber sheet are made by ROTOCURE vulcanizing press or plain vulcanizing press with high quality natural rubber(NR). The natural rubber is from the natural rubber tree with middling hardness and high tensile strength, high elongation, good abrasion resistance, elasticity, safety and nontoxicity without smell. The pure natural rubber sheet is also named gum rubber sheet or para rubber sheet. 1-6mm thickness is made by ROTOCURE vulcanizing press with shiny surface, 7-80mm thickness is made by vulcanizing press for get higher thick thickness. Working under the higher pressure, wearing resistant, food grade lining status at the temperature of -35°C - +85°C in air or water. Apply to punch all kinds of seals, gaskets, lining and others applications with its good function, for example of truck lining, drinking water lining, rubber membrane special for PVC vacuum laminating press.
Specifications:
material: pure natural rubber or NR/SBR
quality: industrial grade, food grade
color: black, white, brown, beige, red, green etc.
surface: smooth/smooth, smooth/impression fabric, double impression fabric
tensile strength: 2-24Mpa
hardness: 35, 40, 50, 60, 70, 80+/-5shore A
elongation: 170%-760%
density: 1.05-1.70g/cm3
working temperature: -35°C - +85°C
thickness: 1.0-50.0mm
width: 0.1-3.6m
length: 1.0-20m
Insertion: reinforce to insert 1-3PLY fabric
natural rubber lining sheet:
top: cured natural rubber with red or black
bottom: uncured neoprene rubber with light yellow
quality: industrial grade, food grade
surface: smooth/smooth
tensile strength: 13-18Mpa
hardness: 35, 40, 65+/-5shore A
elongation: 400%-650%
density: 1.05-1.15g/cm3
working temperature: -35°C - +85°C
thickness: 1.0-25.4mm
width: 1-1.5m
length: 10-20m
Physical character: made with high quality silicone rubber on drum-type vulcanizing press or vulcanizing press according to the different request from the buyers. We depend on the advanced manage, innovative technique and strict quality control with excellent silicone rubber material and machine, ravel out the problem of lower smooth surface and high thickness tolerance of Rotocure vulcanizing machine, and also ravel out the problem of restricted width, length and visible joint on press vulcanizing machine. It is triumphantly without joint and with infinite length under the above mentioned excellence. We have the super-wide drum-type vulcanizing press with 4000mm width and high quality products maximum 3800mm width without joint. High quality silicone rubber with good performance of anti-aging, ozone resistance, heat-resistant, electric insulation, oil resistance, solvent resistance, corrosion resistant, nonpoisonous and tasteless, pollution-free. Working in air, water, oil and other medium at the temperature of -60C - +260C(moment maximum 300C) with the high stability, reliability and surface inactive without sticky. Apply to punch all kinds of rubber seal gasket or special for PVC vacuum laminating press, wooden door vacuum laminating press, glass vacuum laminating press, solar vacuum laminating press, hot laminating press and card laminating press etc.
Specifications:
Material: 100% virgin silicone rubber from Germany or China
Quality: high tear resistant or middle tear resistant
Color: translucent, dark red, black, milk white, grey, blue etc.
Surface: smooth/smooth, smooth/impression fabric, smooth/sanded
Insertion: reinforced and insert 1 PLY fabric
Tensile strength: 7-12mpa
Hardness: 15, 20, 30, 40, 50, 60, 70, 80+/-5shore a
Elongation: 350%-760%
Density: 1.25-1.30g/cm3
Tear strength: 26-42n/mm
Working temperature: -60c - +260c(moment maximum 300c)
Thickness: 0.1-30mm
Width: 0.5-3.8m
Length: 1-50m
Grade: industrial grade, food grade
Press: Germany silicone for "+" and "-" press
Chinese silicone for "-" press only.
The pad printing silicon rubber usages:
The silicon rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys, trade makers .Silicon pad printing is a carrier which transfer printing the patterns on the steel plate onto the toys products surface.
Pad printing silicon rubber features:
Pad printing silicon rubber with high print times and abrasion resistance, without any inpurities, with good printing effects, permanent and durable, we can provide all kinds of colors are available and our catalyst is free charged.
Pad printing silicon rubber operation instructions:
Pad printing silicon rubber is two-component silicone, part a is the liquid silicon rubber, part b is the catalyst. The usual mxing ratio for silicone rubber and catalyst is 100 : 2-3, eg. We take 100grams of liquid silicon rubber, then we add 2-3 grams catalyst, mix then evenly and pour it to your mold. Then after 2-4 hours, you will obtain a printing pad.
Frequently asked question of pad printing silicon rubber:
The reasons why the silicon pad has a short service life are listed as follows:
(1)the problem caused by inappropriate filtration of silicone rubber, and impurities in the packaging process due to the uncleanness of barrels and bags.
(2)the short service life of the silicone pad has a close relationship with the adding amount of silicone oil. The more the silicone oil added, the softer the silicone pad will be. The silicone oil will destroy the molecule of the silicone rubber, thereby bringing about the non-durable and easy ageing of the silicone pad.
We have two models on this series , hy968 and hy988 respectively.The model of 988 is a kind of high temperature addition cured silicon rubber with platinum catalyst.It is mainly designed for metallic arts&crafts and food grade mold making.It features with resistance to high temperature up to 300 centigrade to 500 centigrade, which makes up for those products impossible produced by press machine and fills the blank for large lead-zinc alloy crafts and fine pattern products.It is the most advanced htv-2 high temperature silicon in china and the best option for lead-zinc alloy crafts.
The pad printing silicon rubber usages:
The silicon rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys, trade makers .Silicon pad printing is a carrier which transfer printing the patterns on the steel plate onto the toys products surface.
Pad printing silicon rubber features:
Pad printing silicon rubber with high print times and abrasion resistance, without any inpurities, with good printing effects, permanent and durable, we can provide all kinds of colors are available and our catalyst is free charged.
Pad printing silicon rubber operation instructions:
Pad printing silicon rubber is two-component silicone, part a is the liquid silicon rubber, part b is the catalyst. The usual mxing ratio for silicone rubber and catalyst is two to three percent, eg. We take one hundred grams of liquid silicon rubber, then we add two to three grams catalyst, mix then evenly and pour it to your mold. Then after two to four hours, you will obtain a printing pad.
Frequently asked question of pad printing silicon rubber:
The reasons why the silicon pad has a short service life are listed as follows:
(1)the problem caused by inappropriate filtration of silicone rubber, and impurities in the packaging process due to the uncleanness of barrels and bags.
(2)the short service life of the silicone pad has a close relationship with the adding amount of silicone oil. The more the silicone oil added, the softer the silicone pad will be. The silicone oil will destroy the molecule of the silicone rubber, thereby bringing about the non-durable and easy ageing of the silicone pad.
Liquid rtv silicone rubber for sculpture molding feature of liquid rtv silicone rubber for sculpture molding
Liquid rtv silicone rubber for sculpture molding is flowing liquid with general hardness of 22-50 a �� after curing with features:
1)low shrinkage
2)good operation
3)high tear and tensile strength
4)curing agent free
5)easy de-mold
6)high reproduction times
7)resistance to deformation and high-temperature, acid-alkali
Operations of liquid rtv silicone rubber for sculpture molding
If customers want to make large products and large size moulds, the mould should be made of silicone rubber with high hardness. On the contrary, if the mould with fine and precision patterns, it should be made of silicone with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If mould requiring fast drying and demould, more curing is needed.
We are a recycling company in Sri Lanka.
We can supply unvulcanized Rubberized friction Cord (Tyre Cord) 1 x 40 container (22 MT - 27 MT) on monthly basic.
Product name: Neoprene foam/ Neoprene sheet/ Rubber foam/ CR/ CS/ SBR
Made in Taiwan.
Specs category: 51" x 130" , 51" x83"
Hardness( Type C) class: 1~20
Elongation at break classification::150%~700%
Thickness division: 0.5mm ~ 30mm
Features: Close cell structure,Soft, waterproof, high strength, resistance to seawater, shock absorption, chemical and fire.
Application: Laminated with various fabric are suitable for diving suits, wetsuits, surfing suits, water sports, computer bag, fishing boots, horse blankets, medical care and sport protection accessories.
China zhengzhou mason is china's largest manufacturer of rubber expansion joints of the best, our products are sold around the world. Our main products include rubber joints expansion joints, dismantling joints, steel expansion joints.
Rubber joints are made of nbr rubber, ptfe rubber, epdm.
The flange of rubber expansion joints can be made jis flange, din flange, ansi flange and bs4504 flange.
Variety of materials rubber were applied to different media.
Different materials of flanges are applicable to different working environment.
Please choose according to their specific working environment.
China zhengzhou mason is china's largest company of flexiblerubber bellow company , our products are sold around the world. Our main products include flexiblerubber bellow, dismantling joints, steel expansion joints.
Flexible rubber bellow are made of nbr rubber, ptfe rubber, epdm.
The flange of rubber expansion joints can be made jis flange, din flange, ansi flange and bs4504 flange.
Variety of materials rubber were applied to different media.
Different materials of flanges are applicable to different working environment.
Please choose according to their specific working environment.
We are a team of Mechanical Engineers in the field of Manufacturing of different types of Mechanical Parts from almost all material e.g. Steel, Stainless Steel, Aluminium, Brass, Copper, Bronze Etc. using almost all form of material like Bar, Pipe, Plate, Sheet, Casting, Forging through different Engineering Manufacturing process like Casting, Forging, Turning, Bending, Laser Cutting, Plasma Cutting, Etc. Etc. We have developed various types of rubber product Bellow And Flange Cover Set, 'O' Ring, Hydraulic Seal, Bellow, Etc.
We can produce bellow, hydraulic seal, 'o' ring with high accuracy and standard quality. We can use all synthetic rubber such as polyacrlic, GLT viton, EPDM, viton, ECO, NBR, fluoro silicon, HNBR, neoperene, silicon.
Material: epdm
Raw material brand: momentive, dupont, shinetsu, wacker, lanxess
Material standard: astm d2000, sae j200, jis and so on
Size: according to your requirements
Products function: match the male and female auto connectors as a whole set, play a sealing effect.
Mold style: injection
Application: be suitable for auto industry, medical equipment, household appliances, tele-communication, automobile, electronic field and so on
Lead time: according to clients' requirements
Package: pe bag+outer carton or according to clients' requirements
Material:epdm, epdm foam, silicone, fkm
Raw material brand:momentive, dupont, shinetsu, wacker, lanxess
Material standard:astm d2000, sae j200, jis and so on
Size:according to your requirements
Products function:circulation of air, water and oil.
Mold style:extrusion
Application:suitable for automobile chassis system.
Lead time:according to clients' requirements
Package:pe bag+outer carton or according to clients' requirements
9699 Rubber Items Suppliers
Short on time? Let Rubber Items sellers contact you.
