Crane rail pad
MK2 Crane rail pad is located between a rail and the steel soleplate which improves the performance of crane rails.Cranes
apply high forces to the structures on which they are mounted.The MK5 pad significantly reduces the stress between the rail and its support. The CRANE pad is one of the three key ingredients in achieving a reliable track.
Rail pad should be narrower than the rail it is supporting (nominally 5mm). The pad is normally supplied in 12 meter lengths. The flutes of the pad are placed facing upwards. The pad may be cut to precise length of rail. It can be cut with a hacksaw or jigsaw. No installed length of pad should be less than the spacing between three pairs of crane rail fixing clips. Before installing Mark 2 pad, the supporting area should be clean and free of oil, grease or any projections likely to damage the pad. It is preferable that the steel structure below the pad is not painted. If the rail is to be welded the pad should be protected from excessive heat during welding by being removed under the weld or by being protected with a thermal barrier. Our technical department will be pleased to advise on the suitability of Mark 2 pad in specific installation conditions.
Crane rail pad
MK2 Crane rail pad is located between a rail and the steel soleplate which improves the performance of crane rails.Cranes
apply high forces to the structures on which they are mounted.The MK5 pad significantly reduces the stress between the rail and its support. The CRANE pad is one of the three key ingredients in achieving a reliable track.
Rail pad should be narrower than the rail it is supporting (nominally 5mm). The pad is normally supplied in 12 meter lengths. The flutes of the pad are placed facing upwards. The pad may be cut to precise length of rail. It can be cut with a hacksaw or jigsaw. No installed length of pad should be less than the spacing between three pairs of crane rail fixing clips. Before installing Mark 2 pad, the supporting area should be clean and free of oil, grease or any projections likely to damage the pad. It is preferable that the steel structure below the pad is not painted. If the rail is to be welded the pad should be protected from excessive heat during welding by being removed under the weld or by being protected with a thermal barrier. Our technical department will be pleased to advise on the suitability of Mark 2 pad in specific installation conditions.
Inner tubeoil resistant synthetic rubber
Reinforcementone or two steel wire braid
Coveroil and weather resistant synthetic rubber
flame resistant cover is availableupon request
Working temperature 40F to 212F40C to 100Cwith petroleum base hydraulic fluids
9641 Rubber Items Suppliers
Short on time? Let Rubber Items sellers contact you.
Performance of silicon carbide burner tube
Silicon carbide burner tube has the advantages of rapid cooling and heating resistance, oxidation resistance, high strength, no slag falling, no cracking, long service life and convenient replacement. It is an ideal fire spraying kiln for roller kiln, tunnel kiln, shuttle kiln and so on.
Main uses of silicon carbide burner tube
Silicon carbide burner tube is suitable for ceramic, chemical, glass, metallurgy and other fields. It can effectively control the balance of temperature in the kiln by using burner tube for industrial kilns such as natural gas, liquefied gas, gas and diesel oil.
Specification of silicon carbide burner tube
According to the drawings or requirements provided by customers, our company can design and produce reaction sintered silicon carbide burner tube and fire nozzle that meet the needs of customers.
Fluorine rubber plate is a product used for punching various seals, sealing rings, steel film shirts, aerospace and aviation fields with high oil resistance, flame resistance, high temperature resistance and strong corrosion resistance.
Features of fluororubber plate:
1. The plate is flat and smooth: the new material has smooth surface, heat resistance and deformation resistance, acid and alkali resistance, high and low temperature resistance.
2. Plate cutting is smooth: fluororubber has good wear resistance, good insulation performance and excellent aging resistance.
3. Product performance and use: high tensile strength and elongation, excellent chemical stability, outstanding oxidation resistance.
4. Excellent high temperature resistance of plate: 180 C for long-term use, 200 C for short-term use, and elastomer is a better medium resistance.
Material Rubber
Usage/Application Industrial
Color Black
Packaging Type Box
I Deal In New Only
innovated skirt sealing system is simple yet effective in making conveyor loading stations completely spillage free.
Side Skirt Sealing :
Skirt sealing is generally provided on both sides of the skirt board; however, for conveyors that are inclined upwards or for those handling fines, sealing of the rear of the belt is necessary.
Rear Skirt Sealing :
Rear skirt sealing is provided with a fixed length backing Skirt plate that is based on belt width. The height of the rubber blocks are 100 mm more than the standard size of the side skirt sealing to compensate for trough height.
To order, select the options mentioned here to suit specific conveyor application. In case your order does not specify these details, supply will be with Standard Model Backing Plate of Type L, using carbon Steel material and Rubber Blocks.
Anti-static rubber plate is also called anti-static table mat, and insulating rubber plate is mainly divided into two layers. The surface is a static dissipative layer, the bottom is a conductive layer, and the rubber is added. It is made by a variety of processes.
Product details
Specification of anti-static rubber plate:
Specification of the whole block:
Length: 1m/1.2m
Width: 500mm/600mm/800mm/1000mm
Thickness: 2mm/3mm
Full volume specification:
Length: 10m
Width: 1m/1.2m
Thickness: 2mm/3mm
The above are conventional sizes. If you need other sizes, please contact customer service
Product features:
Processing with new materials, without mixing recycled materials
The surface layer is a power dissipation layer, and the bottom layer is a conductive layer, with good anti-static performance
Good chemical stability, suitable for various acid and alkali environments
Anti-static rubber plate black bottom grid layer with good conductivity
The front bright light layer dissipates electricity and is easy to clean
Non-standard customization to meet your different needs
Application of anti-static rubber plate:
Table mats in production workshops and laboratories of microelectronic industries such as electronic semiconductor devices, electronic computers, electronic communication equipment and integrated circuits
It is used for bedding desktop, assembly line worktop, shelf and making floor mats, and is suitable for different conditions and different environments
9641 Rubber Items Suppliers
Short on time? Let Rubber Items sellers contact you.
