Specification Item Top Grade First Grade Qualified Grade Appearance (Visual Inspection) Gray-white or white powder Initial M.P.,íµí¦ 99.0 98.0 96.0 Loss on Drying%,í_ 0.20 0.30 0.50 Ash%,í_ 0.20 0.30 0.40 Residues%, 240um:0.5 240um:0.5 100um:0.1 Properties: A slight odor. Specific gravity:1.31-1.34.soluble in benzene, chloroform,carbon disulfide; insoluble in water. Application: A medium fast primary accelerator suitable for NR, IR, SBR, NBR, HR and EPDM. An outstanding delayed action accelerator. Be top effective and safe when used at ordinary processing temperatures, causing no scorches. Vulcanized show excellent physical property and quick complete. Usually used alone, when activated by DPG, TMTD and TMTM. Storage: The product should be storaged in the dry and cooling place with good ventilation. Notes: The product could be oiled and pelleted upon customers request. Package: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag.
Specification Item First Grade Qualified Grade Appearance (Visual Inspection) ííWhite powder Initial M.P.,íµí¦ íí142.0 140.0íí Loss on Drying%,í_ íí0.40 0.50íí Ash%,í_ íí0.30 0.40íí Residues(150)%, íí0.50 0.50íí Properties: No odor and poison.Irritating to the skin and the respiratory tract. Specific gravity: 1.38-1.44. Solluble in chloroform, acetone,benzene;hardly soluble in carbon tetrachloride, ethyl alcohol &insoluble in water or gasline. Application: Can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most sulphue-cures elastomers. Scochy and gives fast cure rates. Produces an excellent vulcanisation plateau with good heat aging and compression set resistance in sulphurless and EV a retarder in the vulcanisation of polychl or oprene rubber with ETU. Storage: The product should be storaged in the dry and cooling place with good ventilation. Notes: The product could be oiled and pelleted upon customers request. Package: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag.
Properties: Amber to brown flake or granular. Gravity 1.05, soluble in benzol, chloroform and acetone, nonsoluble in water, but little soluble in petroleum hydrocarbon. Application: The product is mainly used for natural rubber, butadiene nitrile and chloroprene rubber etal, Used in tyres, industry rubber and so on. Storage: Keep container tightly closed in a cool, well-ventilated place. Packaging: 25kg bag. Polypropyrene knitted bags lined with polyethylene bags.
DMDBH curing agent Apperance: past Assay: 45% CAS: 78-63-7 Molecular weight :290.4 Active oxygen content peroxide :11.02% Cas no. :78-63-7; 68083-18-1 Einecs/wlincs no. :201-128-1 Tsca status : listed on inventory DMDBH is a bifunctional peroxide which is used for the crosslinking of silicone rubber Appearance : Transparent evenly paste Assay : 43.0-45.0% Density, 20ípC : 0.870 g/cm3 Flashpoint : 56ípC Freezing point : 6ípC Due to the relatively unstable nature of organic peroxides a loss of quality can be detected over a period of time. To minimize the loss of quality, we recommend a maximum storage temperature (TS max.) for each organic peroxide product. For DMDBH TS max.= 30 ípC When stored under the recommended storage conditions, DMDBH will remain within the specifications for peroxide of at least 6 months after delivery. Thermal stability Organic peroxide are thermally unstable substances, which may undergo self-accelerating decomposition. The lowest temperature at which self-accelerating decomposition of a substance in the original packaging may occur is the Self-Accelerating Decomposition Temperature (SADT). The SADT is determined on the basis of the Heat Accumulation Storage Test. Organic peroxide are thermally unstable substances, which may undergo self-accelerating decomposition. The lowest temperature at which self-accelerating decomposition of a substance in the original packaging may occur is the Self-Accelerating Decomposition Temperature (SADT). The SADT is determined on the basis of the Heat Acumulation Storage Test. For DMDBH SADT: 80ípC Packing and For DMDBH, the standard packaging is 18kg/drum. Transport Safety and handling: Keep containers tightly closed. Store and handle DMDBH in a dry well-ventilated place away from sources of heat or ignition and direct sunlight. Never weigh out in the storage room. Void contact with reducing agent (e.g.amines), acids, alkalines and heavy mental compounds (e.g. accelerators, driers and metal soaps.) Applications DMDBH is used for the crosslinking of silicone rubber. Rubber compounds contain DMDBH have excellent scorch safety. Safe processing temperature: 135ípC (rheometer ts2> 20 minutes) Typical crosslink temperature: 175ípC (rheometer t90 about 12 minutes) 18kg/pail
1. Product name: Rubber Accelerator CZ (CBS) 2. Chemical name: N-Cyclohexyl-2-benzothiazole sulfenamide 3. CAS No. 95-33-0 4. Chemical Formula: C13H16N2S2 5. Specification Appearance: yellowish or off-white powder or granule Initial melting point (centigrade degree): 98.0min. Loss on drying: 0.30%max. Ash: 0.30%max. Sieve residue 100 mesh: 0.05%max. 6. Package: 25kg in kraft paper bag net each lined with PE bag inside. 7.Application: It is used as a after a effect accelerator giving a good scorch delay and a fast cure rates Vulcanizates obtained with CBS shows excellent physical properties. It is mainly used in making tyres, rubber tubes, shoes, rubber belt, wire and so on. 25kg net kraft paper bag with PE bag inside or as clients' options.
IPPD 1. Product nameú¦4010NA( IPPD) 2. Chemical nameú¦N-Isopropyl-N-phenyl-phenylenediamine 3. Molecular formula: C15H18N2 4. CAS No.: 102-72-4 5. Specification Appearance: Purple to grayish brown particles Content: 97.0%min. Initial melting pointíµ: 70min. Loss on heating: 0.30%max. Ash content: 0.30%max. 6. Package: 25kg/bag. Or as customers requirement. 7. Application: IPPD is a common widespread high efficiency antioxidant synthesis of natural rubber and other rubber products, high performance for avoid ozone,flex crach,and it is also a good protecting agent for heating, oxygen, light etc. Widely used for tires, inner tubes, rubber hose adhesive tape etc. 25kg net kraft paper bag with PE bag inside or as clients' options.
Properties: It is yellow to brown schistose or granular solid, synthesized by formaldehyde, modifying agent, active agent and parasubstituted alkylphenols which have different number of carbon atom in the alkyl groups. Applications:The super tackifying resin has the characteristics of long-term effective, nice moisture stability and high viscosity-promoting ability. It's viscosity-promoting ability is similar to para-tertbutylphenolaceylene resin and superior to para-tert-butylphenol(or para-tert-octylphenol) formaldehyde resin. This product should be added under the temperature higher than it's softening point in the early period of mixing, to ensure the resinf+s homodisperse and to get the best viscosity-promoting effectiveness. It can save the use level of processing oil to a certain degree. The recommended dosage is 2-5 phr. Storage: Kept in dry and ventilating place, protected from heat and fire, the storage life is 18 months. The products that exceed storage life and qualified can be used. Package: Packed in knitted bags lined with a layer of kcraft paper bag and a layer of plastic bag. The netweight is 25kg per bag.
Used as a conventional compound chemical peptizer, non-toxic and harmless to human body for no containing of penta chloro thio phenol, It may effectively promote the molecular chain breakage of rubber during mastication and prevent free radicals from recombination to large molecules, which can effectually improve the effect of crude rubber plastication and stability of plasticity, and enable good dispersibility for other compounding ingredients to ensure the homogeneity of different parts during plastication for the same batch of compound mixed material as well. 25kg/bag(paper-plastic compound bag).
Gas release 275-285m/gf Decomposing temperature f, 205 f Heating decrement fn0.3% Ash content fn0.2%. Packing: carton box Gw:26kg; nw: 25kg Measurement: 380*310*360 15.3t/20gp.
Rubber Vulcanizing Agent (Insoluble Sulfur)OT20 (IS-HS-7020 highly thermal stability) Technical Specification Appearance: Yellow Powder (Non-flying) Sulphur Content (%): 80.0¦1.0 Insoluble Sulphur Content (% min.): 72 High temp. Stability (% min.) (105℃*15min): 75 Oil Content (%): 20.0¦1.0 Acid Content (As H2SO4), % max.: 0.05 Heating Loss (60℃*2h), % max.: 0.40 Ash, % max.: 0.15 Fineness(100mesh), % min.: 99.8. Application: Insoluble sulphur OT20 (IS-HS-7020) had been widely used in natural rubber and a variety of synthetic rubber. They are made with Tire and rubber products such as: Rubber Belt, Rubber Pipe and Sealants etc. They are specially used in Radial Truck Tire making. Product Standard: (Enterprise standard) Q/320206GAD03-2008. OT20 Introduction Rubber Vulcanizing Agent OT20. Insoluble Sulfur can improve the resistance to both fatigue and ageing of all kinds of rubber products. It is used as the best vulcanizing agent for rubber. And it is widely used in the manufacture of the rubber chemistry such as tire, rubber pipe, shoes, cable and wire, insulating materials, latex, and all kinds of automobile rubber parts, especially for radial tires. Advantages of Insoluble Sulfur: The rubber no need spout frost during storage time. The Insoluble Sulfur is able to keep the unanimous features of the rubber material, and prevent the pollution to rubber product and the models With Insoluble Sulfur, there will be no transferring phenomenon between rubber layers that protects the moulding stickiness of the surfaces Reduce coking while mix smelting and storage Shorten vulcanization time, reduce the dose of sulfur and improve the property of anti-aging of the product . Packing: Packing and storage: IS8510 is packed in a25 kg bag with PE lining and stored in a ventilated cool, dry place under normal conditions. Storage temperature should be less than 40f¦. Keep away from a fire heat and moisture. It cannot be stored together with amine and alkalescences, preventing blocking from stacking. Guaranteed storage is half a year.
Rubber Chemicals Micronized Sulphur [Sulphur Powder 325 Mesh] Insoluble Sulphur Complete Range of Anti Oxidants and Accelerators Carbon Black Zinc Oxide Precipitated Silica Hydrocarbon Resin / Petroleum Resin.
Rubber crum powder 30 and 40 mesh 40 kg
Specification: Appearance: grye purple to brown purple granule Initial melting point: 70.0 min Loss on heating: 0.50 max Ash: 0.30 max 20/25kg each, kraft bag
Appearance: grey-purple to brown-purple granule Initial melting point í²45.0 íµ Loss on heating ín0.50% Ash ín0.30% 20/25kg each, kraft bag
Product name: ble Cas number: 68412ú¡48ú¡6 Specification: Appearance: puce sticky liquid Viscosity pa.S 2.5-7.0 Ash: 0.3% max Application: rubber antioxidant ble is a general anti-aging agent for rubber products. Rubber antioxidant ble has fine protective effects to thermal-oxidative aging; flex cracking, fatigue aging as well as a certain effect to ozone aging and weathering aging. Rubber antioxidant ble can also be used as stabilizing agent for synthetic rubber such as sbr, br etc. Meanwhile, rubber antioxidant ble can promote the adherence of the gross rubber with the metal wire cord and other framework materials. Main rubber additives: ippd(4010na), 6ppd(4020), tmq, pan, pbn, ble, sp, 2246, dotg, tbbs, cbs, dbha(2000), si69 Place of origin: China 200kg¿miron drum;18kg/carton
Ruuber powder
Rubber Accelerator XT580 ( Typeó=) Chemical Name N --aliphatic benzothiazoles sIfenamide + retarde Properties Grey white or light yellow powder , atoxic , no --nitrosamine . no --carcinogenic effect . Application its curing rate 15 similar to that of NS It ' 5 suitable for NR and SR in radial tire manafacture. 25kg per PE bag
Antioxidant 2246 Chemical Name 2 , 2 í»--methylene bis ( 4 --methyl --6 ¿Ctert butyl phenol ) Properties White crystal powder . it 15 a general non --staining phenol --like antioxidant . Application Its It 15 widely used in NR , SR and latex articles as well as various Synthetic materials and petroleum products . In particular , it is applicable for light or colorful rubber and latex --dipped articles because of its non --discoloration . It ' s also an excellent antioxidant for many knids of plastics , such as ABS PE and cellulose resin etc 25Kg per PE bag
Moca Moca polyurethane curing agents , and new curing agent Moca-wh Chemical name: 4.4- methylene- bis- (ortho-chloroaniline) Cas no: 101-14-4 Applications: curing agent for polyurethane elastomers and cast polyurethanes.Curing agent for epoxy urethane resin. Moca- wh is used for pu product that requirs high hardness and wearability with light color. Give mal to henrychina2008 at sina dot com. If you have interest.
Ebonite dust brown ultra fine Ebonite dust is ultra fine with ash contents less than 1.5 25 kgs paper bags
