Diameter DN3 to DN3000 Accuracy 0.5;1.0 Flow rate range 0.1~15m/s Conductivity =5µm/s Fluid temperature Ordinary rubber liner -20~+60? High temperature rubber liner -20~+90? Ptfe liner -30~+100? High temperature Ptfe liner -30~160? Power supply: 24VDC;220VAC Straight pipe requirements Pipe type: upstream=5D,downstream=3D Connection mode : Flange connection are between flow meter and piping that follows GB11988 rules Explosion-proof grade: Exd?CT4 Display : LED displayer
Technical specification: 1.Accuracy level: 1.0 2.Working pressure: 1.6MPa, 2.5MPa, 4.0MPa or higher 3.Application temperature: -40?~+350? 4.Pressure loss: resistance cd=2.4 5.Power supply: 12-24VDC 6.Explosive proof level: laiiCT6 (essential safety) 7.Data output: low voltage pulse=1V high voltage=6V standard current signal 4~20mA
Pipeline bore (mm) Throttling element 1st choice (set) 50, 80, 100, 125, 150, 200, 250, 300 2nd choice (25), 65, 175, 225, 275, 325 Throttling ß Standard orifice 0.44, 0.52, 0.65 Material 1st choice: 1Cr18Ni9Ti; 2nd choice: 2Cr13 Temperature range ? Water Environment temperature ? 0 ~ 50? Application temperature ? 0 ~ 100? Dry gas 0 ~ 50? -25 ~ 200? Wet gas 0 ~ 50? 0 ~ 500? Steam 0 ~ 50? 100 ~ 450? Pressure range Nominal pressure: 2.5MPa, 4.0MPa Relative Humidity =95% Flowing range Same as the traditional standard orifice flow meter Accuracy 1% Protection level IP65 Power supply 24VDC Holding part material 20# steel, A3 steel (optional), 1Cr18Ni9Ti (optional)
Place of Origin Shenyang, China (Mainlan Brand Beixing Model Throttling: d) Name: Number: device Nominal pressure
Name Model Type Platinum-10% Rhodium/Platinum thermocouple KS-602/604 S Tolerance Recommended Temperature RangeMax Temperature Response Time ±3? 1500-1700? 1800? 4~6s
•Waterproof and designed to float •Easy-to-read Custom Dual-level LCD •On-the-spot measurement •Automatic Temperature Compensation •With Temperature Display •Replaceable pH electrode •Auto power off Housed in a floating waterproof case with dual level LCD display.The tester allows up to two-point calibration. Press the CAL key and the display shows the standard buffer pH needed for calibration. Immerse the pH electrode into the calibration solution as indicated and press the CAL key. The tester is now automatically calibrated.
The PH-097 is an advanced handheld,Housed in a floating waterproof case with dual level LCD display. It can be used for testing the acidity or alkaline levels of almost any liquid, in a wide variety of applications. It also measure temperature in both Celsius and Fahrenheit. The meter incorporates automatictemperature compensation (ATC) to accommodate for discrepancies in temperature that would naturally occur. Though the meter is factory calibrated, it also features digital calibration for easy and precise calibration that will yield better results. This tester will automatically power down 4 minutes after the last key press. This function is helpful to save battery. It can also be turned off manually.
This compact tester features a large easy-to-read LCD. Unlike other pH testers, the pH electrode can be interchanged with any pH electrode of different size and shape. This allows you to use application specific electrodes and saves the cost of a new meter when it is finally necessary to replace an exhausted electrode. The tester is fast, accurate, lightweight. Testing pH has never been easier!
High-precision; small size; simple, easy accessibility and the operation panel that makes machines easy to understand, easy to operate. Automatic temperature compensation, with the help of the temperature probe, can automatically correct the impact of temperature on the pH. Accurate thermometer, the temperature of an independent probe, the sensor can be quickly tested solution temperature. BNC with the composite electrode and 9 V battery, around the world to facilitate the replacement of batteries and electrodes. Economical and practical, fully in line with a wide range of industries need to test.
The KL-98102 is an ideal pocket tester for educational purposes. Designed with a 0.01 pH resolution and one-point manual calibration through easy-to reach trimmers, it immediately displays pH variations to reflect the smallest change in the sample. With only two operation buttons, it allows immediate and precise response in a concise design. This is a rugged unit that can be used again and again. The probe is even durable enough to be used as a stirrer. The HOLD button will freeze the display reading for your documentation requirements.
This instrument and built-in microprocessor chips, good looking, feature rich, easy to use, with the following notable features: 1. High accuracy 0.001 2. new designs, large screen displays 3. User-friendly interface, stability indicating identity 4. Three standard, two-point or single-point automatic calibration 5. Automatic temperature compensation, or manual temperature compensation of 6. Wide range of PH and redox potential measurements
Use the composite electrode, but also for improving the electrode and after-sales service, so that the life of this equipment has greatly extended, Application of advanced electronic technology, high-quality components, with more than 10 years of production experience, and fully ensure the equipment is in power, measurements very steady, measured the scope and application of wide and high accuracy, easy to operate. KELILONG to the new technology, the lowest price and high quality public service users.
Grating: 1800/mm Wavelength range: 190-900nm Spectral bandwidth: 0.1, 0.2, 0.4, 1.0, 2.0nm Wavelength accuracy: 10.15nm Wavelength repeatability: 0.1nm Baseline stability: 002A/30 minutes( static) ; 0.005A/30 minutes.(dynamic) Light source: 6 lamps automatic turret, automatic alignment Power: double ;cathode power built-in high performance lamps Relative humidity: 20-80% Environment temperature: 15 Power requirement: 220V (5%~-10%), 50/60 Hz; 5000VA Size: 980*450*550mm,60kg
VERY SENSITIVE. ACCURACY BETTER THAN 0.02% 100. 20 KG, @ 500 x 300 x 300MM
1:appearance;pure white glass, main body porcelaine; 2.Thin-film switch perfect color assortment, good touch feeling; 3.Tray¡¡édecoration plate are sus304, good texture; 4.Large lcd display with blue back light(color is selected by client) 5.High resolution, fast responce, stable performance; 6.Couting function. 7.Different international weighing units; 8.Tare all the capacity; 9.Stabdard rs232 connecte with pc, printer or other device; 10.Ac-dc alternating, rechargeable battery;
with tare x 2, units, net/gross, print, zero, on, Off function keys straight weighing function, counting function, Check weighing hi©\ok©\lo function, multiple Weighing units available, hold (animal) function power on zero©\tracking, auto©\calibration, auto©power off mode, digital noise filter, full tare, Accumulation memory, programmable capacity And division, low battery indicator and charging Status indicator oiml tc number: dk 0199.371 240mm x 105mm x 180mm (wxdxh) 1.45kg
Ryq-3 turbocharger balancer/ balancing machine Parameter 1.Maximum weight of workpiece: 0.1-3kg 2.Maximum diameter of workpiece: 350mm 3.Distance between two bearing pedestals: 30-450mm 4.Journal diameter on roller carriages: 4-17mm 5.Belt driving diameter: less than150mm 6.Rotation speed when the diameter of operationg transmission is 50mm:400-3000min r/mm 7.Minimum achievable residual unbalance: less than 0.5% 8.Unbalance reduction ratio: 90% 9.Motor power:0.09kw 10.Speed regulation way: frequency conversion speed regulation Plywood box
Yyq-16 belt drive hard bearing balancer/ balancing machine Parameter 1.Maximum weight of workpiece: 0.3-16kg 2.Maximum diameter of workpiece: 500mm 3.Distance between two bearing pedestals: 50-550mm 4.Journal diameter on roller carriages: 5-36mm 5.Belt driving diameter: 15-200mm 6.Rotation speed when the diameter of operationg transmission is 100mm:400-2500min r/mm 7.Minimum achievable residual unbalance: less than 0.5% 8.Unbalance reduction ratio: 90% 9.Motor power:0.18kw 10.Speed regulation way: frequency conversion speed regulation Plywood box
(2) taiwan shangyin advanced screw has excellent performance, sufficient strength, operating sensitivity, high accuracy, speed; noise. (3) the machine adopts u.S. Microe high-precision grating. High-speed non-contact operation, to ensure zero friction and zero machine wear, open-type optical design ensures high performance, periodic error is usually on ¡¨¤ 0.25|¨¬m, linearity error characteristics for each 60mm ¡¨¤ 1|¨¬m. 9. Focus mode: af z-axis. 10. Linear precision: u1 = (1.5+ l/200) |¨¬m. 11. Repeat precision: 2 |¨¬m. 12. Equipped with: pc a 19"monitor * 2. 13. Work piece maximum height: 200mm. 14.Weight limit: 35 kg. 15.Dimensions: 620*840*1020 mm. 16.Machine weight: 330kg 17.Machine positioning accuracy: ¡¨¤ 0.001mm. 18. Three axis velocity:200mm/s. 19. File output formats: stl, obj, iges, dxf, of vrml.. 20. The structure of the machine: 0 precision 100mm thick granite platform fuselage basis. High accuracy, good stability, and not easily deformed, resistant of acid and alkali. 21. Application areas: mechanical, electronic, electrical, aerospace, automotive, military, mold, optical and other industries. 3d optical measuring machine vmu3020 Packaged by free fumigation wooden case
Used profile projector Usages: 1. Profile projector is mainly used for the measurement of the mechanical parts of the length, Warranty: 1. Warranty period: within 12 months from the date of assemble and acceptance, but not exceeding 15 months from the date if shipment. During this period machine failure caused by our side is maintained with free of charge. 2. Extra warranty period: we will take phone and regular visit to users with a combinative after-sale advisory service. 3. We provide life warranty services of machine for users with cost. 4. Our company has spare parts which can be provided for the users with cost. 5. We provided users with after-sales value-added technical service by preferential price for life, such as technical upgrades, retrofit. Used profile projector Free fumigation case