Tungsten rod can be widely used in illumination, heater and the electronic mechanical engineering, etc. Tungsten rod can be used to make the electricity photo source, the automobile and the tractor light bulb, framework, leading wire, electrode, heater, contact materials and so on.
Tungsten crucibles for quartz melting, sapphire growing furnace and high temperature vacuum furnace are also our main products.(including 35kg,65kg,85kg,120kg) Crucible for sapphire growing 1. Purity: 99.95% 2. Density: 18.3g/cm3 3. Application temperature environment 2300.
Tungsten crucibles for quartz melting, sapphire growing furnace and high temperature vacuum furnace are also our main products.(including 35kg,65kg,85kg,120kg) Crucible for sapphire growing 1. Purity: 99.95% 2. Density: 18.3g/cm3 3. Application temperature environment 2300.
Main Comp. 99.999 Impurities max. K 0.000005 Na 0.00005 Ca 0.00005 Fe 0.0001 Ta0.0001 Pb 0.00001 Cu 0.000007 Sn 0.000005 Ba0.00001 Mn 0.000005 Be 0.000005 Pt 0.00003 Co0.000005 Cd 0.000005 Cr 0.000005 Mo 0.00001 Mg0.00005 Zn 0.00005 Sb 0.00005 Al 0.00005 Ni0.00001 Ti 0.000005 Bi 0.00001 As 0.00005. Purity: WY99.999% Appearance: Grey metal bar Density: 18.2 g/cm3.
Purity: wy99.97%/99.96%/99.95% Appearance: shine with grey or dark grey metallic luster Product specification: 12mm *12mm* (330 to 350)mm Composition analysis (%) Main comp.Wy99.97 Other content : 1 Fe 0.004 al 0.0001 si 0.0017 mg 0.0006 Ca 0.001 ni 0.001 o 0.002 c 0.002 P 0.0008 n 0.0015 pb 0.0001 bi 0.0001 Sn 0.0001 sb 0.001 as 0.001 mo 0.008 Main comp.Wy99.96 Other content¡ì1 Fe 0.0045 al 0.0005 si 0.0015 mg 0.0006 Ca 0.001 ni 0.002 o 0.0025 c 0.002 P 0.0008 n 0.002 Pb 0.0001 bi 0.0001 Sn 0.0001 sb 0.001 as 0.001 mo 0.01 Main comp.W¡§ooy99.95 Other content ¡ì1 Fe 0.005 al 0.002 si 0.003 mg 0.002 Ca 0.003 ni 0.003 o 0.003 C 0.005 P 0.001 n 0.003 pb 0.0001 bi 0.0001 Sn 0.0001 sb 0.001 as 0.002 mo 0.01. Packing: wooden case Quantity: 35 pieces/case Net weight:(29-31.5)kg/case.
Main Comp.W over 99.98% Other Content (less than) Fe 0.0026 Al 0.0006 Si 0.001 Ca 0.001 Ni 0.0009 O 0.0018 Cu 0.0005 N 0.0015 P 0.0001 Sn 0.0001 Sb 0.001 As 0.001 C 0.0001 Mg 0.0006 C 0.002 Bi 0.0001 Mo 0.003 - -. Dia. :17.5mm Length :(720-750)mm Net weight: 3kg/piece Package: wooden case.
Trademark : FW-1 Formula : FW Appearance: Dark gray tungsten powder, light gray tungsten powder for spraying. Applications : Used for large slabs, rhenium tungsten thermocouple material, and contact alloys. Packing : Iron drum lined with double polyethylene bags. Net weight: 100kg or 200kg per drum. Physical properties Model Average size(um) Bulk density(g/cm3) Oxygen content not more than (%) 06 0.6-0.8 1.4-2.2 0.5 08 0.81-1.0 1.7-2.5 0.4 10 1.01-1.5 2.0-2.8 0.3 15 1.51-2.0 2.2-3.0 0.3 20 2.01-3.0 2.6-3.5 0.25 30 3.01-4.0 3.2-4.2 0.25 40 4.01-5.5 3.8-4.8 0.25 55 5.51-7.0 4.0-5.2 0.2 70 7.01-15.0 4.2-5.5 0.2 150 >15.0 4.5-6.5 0.1 Component Analysis (%) Main contents W: 99.95 Contents of other elements Fe 0.0050 Si 0.0020 Ca 0.0020 Al 0.0010 Mn 0.0010 Mg 0.0010 Ni 0.0030 Sb 0.0010 Cr 0.0010 As 0.0010 Pb 0.0001 Bi 0.0001 Sn 0.0003 Cu 0.0007 Mo 0.0050 K 0.0015 Na 0.0015 S 0.0010 P 0.0010 C 0.0050 - - Iron drum lined with double polyethylene bags.
Purity: 99.96% Diameter:17.5mm Length: (720-750)mm Weight: 3kg / pc Packaging: Wooden box Applications: Mainly used for foundry materials, tool bit of processing lathe, and conductors, steel-making burdening and additives, crankshaft and cylinder burdening and electrodes for advanced automobiles; for the manufacture of guns, artillery, rockets, satellites, aircrafts and ships. Component Analysis (%) Main contents: 99.96 Contents of other elements Fe 0.0045 Al 0.0005 Si 0.0015 Mg 0.0006 Ca 0.001 Ni 0.002 O 0.0025 C 0.002 P 0.0008 N 0.002 Pb 0.0001 Bi 0.0001 Sn 0.0001 Sb 0.001 As 0.001 Mo 0.01. Wooden box.
Purity: 99.98% Diameter: 17.5mm Length : (720-750)mm Weight : 3kg / pc Packaging: Wooden box Applications: Mainly used for foundry materials, tool bit of processing lathe, and conductors, steel-making burdening and additives, crankshaft and cylinder burdening and electrodes for advanced automobiles; for the manufacture of guns, artillery, rockets, satellites, aircrafts and ships. Component Analysis (%) Main contents W: 99.98 Contents of other elements Fe 0.0026 Al 0.0006 Si 0.001 Ca 0.001 Ni 0.0009 O 0.0018 Cu 0.0005 N 0.0015 Pb 0.0001 Sn 0.0001 Sb 0.001 As 0.001 Cd 0.0001 Mg 0.0006 C 0.002 Bi 0.0001 Mo 0.003 - - Wooden box.
Due to the manufacturing advantages of tungsten rods, tungsten sheets, tungsten machining parts and tungsten processing equipment, Sunstone established a Division of hot zone of sapphire crystal growing since 2008. Until now Sunstone provided a large number of hot zone parts like crucibles, sheet and rods to Russia, Ukraine, USA, Japan, Korea, Thailand, Singapore Taiwan and Hong Kong. So now we have been gradually formed the capacity of 30 sets hot zone in 35Kg, 65Kg, 85Kg and 120Kg. Sunstone has a sound quality management system of ISO9001 and ISO14001 and get the certification. Sunstone has a excellent testing equipment of physical properties like density, hardness, surface roughness, grain size, tensile strength and other parameters, even ultrasonic NDT. The distinguishing characteristic of Sunstone 's tungsten crucible is high density, high purity and high precision machining. As the whole set of hot zone parts is completed in Sunstone , so the quality between the components is to get a good guarantee. With its excellent quality and reasonable price has been widely recognized by the industry of sapphire crystal growing and hot zone furnace at home and abroad, Sunstone has been designated the sole supplier and leader in domestic and foreign industry. Because of their excellent corrosion resistance again sapphire melt and their high temperature creep resistance, tungsten crucibles are used for sapphire crystal growing in all common processes. Wooden case.
Tungsten, as a high performance material, has unique properties: highest melting point, low vapor pressure, low coefficient of thermal expansion, Tungsten bars or rods is often used for producing ion implantation parts. Tungsten electrode, electric light source parts and electric vacuum components. In high temperature furnace,tungsten rods or bars is used in producing heating elements and heating parts. Surface Finish Black - Surface is "as swaged" or "as drawn"; retaining a coating of processing lubricants and oxides. Cleaned - Surface is chemically cleaned to remove all lubricants and oxides. Ground - Surface is centerless ground to remove all coating and to achieve precise diameter control. Wooden case.
Tungsten rhenium wire(WRe wire) is an alloy wire formed with tungsten and rhenium metals. Tungsten rhenium wire has a lot of advantages such as high strength in room and high temperature, good ductility after recrystallization, large resistivity, low coefficient of resistance, resistant to oxidation and carbonization, anti-"water cycle response" ability and welding performance. In recent years, tungsten rhenium wire are widely exported to Taiwan, Japan, Korea, Russia , Ukraine and other countries because of the sapphire of single crystal growth, so WRe25 (tungsten 75%--Rhenium 25%) with diameter of 0.5mm is the most commonly used . All tungsten rhenium wire is packaged per reel. 400g or 500g per reel. 250-260m per kilograms.
Tungsten rhenium wire(WRe wire) is an alloy wire formed with tungsten and rhenium metals. Tungsten rhenium wire has a lot of advantages such as high strength in room and high temperature, good ductility after recrystallization, large resistivity, low coefficient of resistance, resistant to oxidation and carbonization, anti-"water cycle response" ability and welding performance In recent years, tungsten rhenium wire are widely exported to Taiwan, Japan, Korea, Russia , Ukraine and other countries because of the sapphire of single crystal growth, so WRe25 (tungsten 75%--Rhenium 25%) with diameter of 0.5mm is the most commonly used . Diameter: 0.5mm 400g or 500g per reel. 250-260m per kilograms.
Grade: W-1 Appearance: Silver-gray metal bar Density: 18.0g/cm3 Specifications: 12mm*12mm*£¨510-530£©mm Packing: Metal box Component Analysis (%) Main contentsW£º¡Ý99.999 Impurities Not more than K 0.000005 Na 0.00005 Ca 0.00005 Fe 0.0001 Ta 0.0001 Pb 0.00001 Cu 0.000007 Sn 0.000005 Ba 0.00001 Mn 0.000005 Be 0.000005 Pt 0.00003 Co 0.000005 Cd 0.000005 Cr 0.000005 Mo 0.00001 Mg 0.00005 Zn 0.00005 Sb 0.00005 Al 0.00005 Ni 0.00001 Ti 0.000005 Bi 0.00001 As 0.00005 Box Specifications: (645*290*275)mm Quantity: 27 / box Applications: Mainly used for high standard bearing steel, materials for automobile, heavy industry, rapid transit railway, aerospace, precision equipment, high-tech military weaponry and other high-tech industries, excellent special steel products and barrier layer of integrated circuits with high precision, high reliability, and high added value for manned spaceflight and lunar exploration, and T1 sputtering target. Metal box Box weight: (30-35) kg / box Gross box weight : (34-39) kg / box
Our tungsten copper has good physical and mechanical properties. 1: high electrical conductivity 2: wear erosion Our CuW alloy have high physical and mechanical properties, as well as high thermal and electrical conductivity, these properities make our materials very sutitable for the die inserts and electode facing. Our Copper tungsten alloy are designated as ASTMB702, RWMA Class 10, RWMA Class 11, RWMA Class 12, GB/T8320-2003. We can produce according to your drawing.
Grade NoISO code Density g/cm3Hardness HRATRS MPA N/mm2 SK6XK101.7-15.191.5-921800-1950 SK8K2014.5-14.989-89.52000-2300 SK10XK20-K3014.4-14.790.5-912200-2400 SK15K4013.9-14.287-87.52400-2600 SK10TK05-K1014.6-15.092.3-92.71800-2000 Wooden box
Tungsten dart billet Billet is the raw meterial of barrel which forms the main part of dart. At xiamen eternal tungsten, we can offer various range of tungsten alloy products, including w-ni-fe billet, w-ni-cu billet, w-ni-cu-fe, etc. Also we own mature technique of surface grinding adn centre-less processing. According to customer request
Tungsten carbide.
Tungsten carbide bars hard metal rods.
We produce tungsten carbide drawing dies in various type such as R, W, S series, Grade YG6 and YG8, various sizes.
