Cemented carbide is the term which refers to sintered composite materials composed of at least one metal carbide constituent. Tungsten Carbide (WC), Titanium Carbide (TiC),Tantalum Carbide (TaC) are common constituents. Our tungsten carbide rods are made of optimum quality raw material WC, which acts as hard phase, and the binder agent Cobalt. With powder metallurgy HIP technology, carbide rods are sintered with homogeneous microstructure including little or even no porosity, to a great extent, increasing the whole performance and properties such as hardness and bending strength. Our HF30U solid rod obtains 93 HRA hardness and at least 4000 MPa transverse rupture strength.
Ures: Material: high density tungsten alloy Density: 12.5 to 18.5g/cc Diameter: 1-100mm Composition: 27 to 97% w, w-ni-fe or w-ni-cu Surface: polish Export standard packing, plastic bags inside, wooden box outside (heat treated)
We produce different sizes and different shapes of tungsten carbide pins, studs, nails for the tyre stud, spike, shoes, horses,buses, trucks, etc. 1. Type: threaded ball studs, Flat studs,screw tire studs 2. Apply for: all kinds of cars, such as truck, racing car, general car, bicycle, alpenstock 3. Advantage: -- pure raw material -- easily installed&removed -- recycling use -- sizes & types are available -- good wear resistance -- strict tolerance controlled -- virgin raw material -- zinc plated for rust protection -- directly factory sale with good price -- short and on time delivery -- all the specifications can be used in cars -- samples will be given upon the inquiry All factors of the list are absolutely important on the winter tire studs, but it is not essential. Professional manufacture for snow studs, tyre studded scews, antiskid boots nails: New type snow screw car tire studded pin, easy to install and remove without assembling tools. using in different season, after winter weather can take them off for next turning. Choosing the screw studs only to based on depth of your tire thread.
Feature: -100% virgin raw material -Double Cut -First choice for general machining -Improves ease of control -Increases metal removal rate -Breaks swarf into small manageable pieces -Aluminium Cut -First choice for non ferrous materials and plastics -High helix and large flute volume for rapid metal removal
We are a manufcturer from China, produce Grade YG6 and YG6X tungsten carbide strip for cutting and wear plates, both unground blanks and ground item. Strips sold to Europe, Asia, South America..
We company can manufacture tungsten carbide strips/bar/plates/tubes according customers'requirements. 1. High hardness after quenching and tempering 2. Excellent wear resistance 3. Excellent hot-work performance
Tungsten rod is produced by pressing and sintering into billets, which are worked by rolling or swaging into rod. ess , excellent wear resistance , high ultimate tensile strength , extension of good , low vapor pressure , heat resistant, good thermal stability , easy processing, corrosion resistance, good shock resistance , high radiation absorption capacity , excellent impact resistance and crack resistance , and non-toxic environmental protection is consistent with international environmental protection standards Appliance of tungsten heavy alloy rod These kinds of rods could be machined further, which are usually used to making the parts of counterweights for oil logging, artillery, rocket, satellite, aircraft, boats; radiation shielding, military defense appliance, armor-piercing bullet, welding rod, the aerospace, mechanical manufacture, extrusion die, also for some sports fields, such as darts, billets, golf club, etc. Exporting standard wooden case or barrel packaging
Carbide round bars have superior hardness, flexural strength, concentricity and straightness. 1. The round bar is press molded by molding and extrusion. 2. The cemented carbide round bar is sintered by a low-pressure sintering integrated furnace, thus the overall performance is high. 3. The rough tungsten-cobalt carbide round bar, or the outer diameter of the round bar can be refined and polished according to any tolerance. The common tolerances are h6, h7, -0.005, etc., and the round bar end chamfer can also be processed. 4. Carbide round bar is suitable for the processing of general steel, cast iron, stainless steel, heat resistant steel, nickel base and titanium alloy. Recommended for general purpose carbide tool materials such as twist drills, end mills, taps, and gun drills. 5. Round rods with diameters from 0.3 to 40mm are available in lengths up to 400mm. We can also provide products according to your drawings.
We produce tungsten carbide drawing dies in various type such as R, W, S series, Grade YG6 and YG8, various sizes.
