1. Smooth surface, light weight, anti-aging, anti-corrosion 2. Always used on truck body, container, inside board of the refrigerator, ceiling panels, commercial, civil construction and public facilities interior walls and ceiling. Modified car, or other special purpose transport outer panels etc.
1.Eco-friendly No formaldehyde, no benzene, make your house healthy and confortable 2.Interlocking Easily installed &remove , and combined closely 3.5 years warranty Long service life, usually around 30 years. If any problmes (excluding artificial damage) in 5 years, we can supply new ones. 4.Aritistic Wood or rock surface
Anti-aging, wind resistant, the using life can up to 30 years. Frp sheet has an excellent aging resistance performance, it has already made consensus in this area. Using frp produces water collecting gutter, we can say that it takes full use of frp material advantage, nothing goes to waste. General steel gutter is limited within 3 meters, increased the interface construction cost and difficulties. Our gutter is produced by automatic continuous forming production line, no length limitation, reduces the number of interfaces, convenient to install and waterproof, effectively reduce construction cost. Chemical resistance performance is significantly better than inorganic materials such as stainless steel products.
FRP is also known as GRP sheet, which full name is fiberglass reinforced polyester (plastic) sheet. As a new material, Greater than that of steel products and aluminum products in specific tenacity. Products in the ultra-low temperature or high temperature will not happen brittle fracture, deformation and to prevent heat transfer. For that, FRP is widely used in so many industry. 2.FRP Sheet features: A. High mechanical strength and good impact toughness B. Roughness surface and easy to clean C. Corrosion resistance, wear resistance, yellowing resistance, anti- aging D. High temperature resistance E. No deformation, low thermal conductivity, excellent insulation properties
1. Smooth surface, light weight, anti-aging, anti-corrosion 2.Can be any color 3. Always used on truck body, container, inside board of the refrigerator, ceiling panels, commercial, civil construction and public facilities interior walls and ceiling. Modified car, or other special purpose transport outer panels etc.
Also known as grp sheet, which full name is fiberglass reinforced polyester (plastic) sheet. As a new material, greater than that of steel products and aluminum products in specific tenacity. Products in the ultra-low temperature or high temperature will not happen brittle fracture, deformation and to prevent heat transfer. For that, frp is widely used in so many industry. 2.Frp sheet features: A. High mechanical strength and good impact toughness B. Roughness surface and easy to clean C. Corrosion resistance, wear resistance, yellowing resistance, anti- aging D. High temperature resistance E. No deformation, low thermal conductivity, excellent insulation properties
Frp is also known as grp sheet, which full name is fiberglass reinforced polyester (plastic) sheet. As a new material, greater than that of steel products and aluminum products in specific tenacity. Products in the ultra-low temperature or high temperature will not happen brittle fracture, deformation and to prevent heat transfer. For that, frp is widely used in so many industry. 2.Frp sheet features: A. High mechanical strength and good impact toughness; B. Roughness surface and easy to clean; C. Corrosion resistance, wear resistance, yellowing resistance, anti- aging; D. High temperature resistance; E. No deformation, low thermal conductivity, excellent insulation properties
Lakdek Roofing Lakdek Roofing is available in three profiles in non colour and colour bonded steel. This is for industrial, Commercial and domestic applications. Product Specifications Feeding Width - 1000mm Effective Cover Width - 840mm Rib Height - 25mm Tensile Strength - G550 (Nominal sheet depth) Coating Class - AZ 150 Recommended Total Coated Thickness - 0.47mm and 0.40mm Recommended Screw - Steel Frames - 12 x55/ 12 x 50 Timber Frames - 12 x 68mm
Lakdek Corrugated Roofing Sheet Product Specifications Feeding Width - 1200mm Effective Cover Width - 988mm Rib Height - 19mm (Nominal sheet depth) Tensile Strength - G550 and G350 Material - Zn/Al - GI Standerd Total Coated Thickness - 0.12mm up to 0.47mm
Lakdek Roofing (3) of colour bonded, (Zinc Aluminium) Alloy Coated Roofing, and Cladding in Sri Lanka is suitable, for a wide range of heavy duty roofs., Lakdek Roofing (3) is ideally suited to, carry large volumes of water on roofs, with a pitch as low as 1° degree. The, unique fastener system by using a roof, connector provides easier and faster, installation., Lakdek Roofing (3) is available in, fifteen attractive colours and could be, manufactured to customized lengths. Product Specifications Feeding Width - 1000mm Effective Cover Width - 600mm Rib Height - 88mm Tensile Strength - G550 Coating Class - AZ 150 Recommended Total Coated Thickness - 0.35mm up to 1.20mm
Mold: lg-840 Width: 900mm Effective width: 840mm Length: cutomized Thickness: 0.8mm - 3.0mm Color: blue, translucent, green, white, ect
Mould:840 Width: 900mm Effective width: 840mm Thickness: 0.8mm-3.0mm Length: customized Color: blue, green, translucent, dark blue, white
Lightweight cement board is ideal substrate withstands prolonged exposure to moisture in both interior and exterior applications. Suitable for use in many interior and exterior applications, even in challenging conditions. Weight 50% less than other cement board on the market. be "1-person" lift board.Easy-cut and fast installation
Metal Ceiling framing system for False ceiling consists of 4 components; Ceiling Section, Intermediate Sections, Periemeter Channel and Ceiling L Angle. These Ceiling channels are made from Galvanized Iron and do not rust or corrode over time
Fibre cement cladding can be made waterproof with the application of a liquid or membrane waterproofing treatment. Because of its water resistant properties, fibre cement cladding is often used as external cladding and for internal wet area applications
Type: Steel plate Thickness: 0.40mm,0.42mm,0.5mm Standard: AiSi Width: 1000-1220mm Length: 1800-2000mm, 1.8- 5meters or as client's request Certificate: API, ce, RoHS, SNI, SASO, PVOC, SONCAP, SABS, sirm, tisi, KS, JIS, GS, ISO9001 Pattern: Steel Coil Tolerance: �±1% Processing Service: Welding, Punching, Cutting, Bending, Decoiling Alloy Or Not: Is Alloy Delivery Time: 15-21 days Surface: chromated,passivation treatment,oiling Spangle: reuglar spangle Color: RAL Color Grade: SGLCC
On commercial buildings, the roof serves as much more than just a protective covering. Commercial rooftops house much of a building's equipment and material necessary for functioning, including pipes for gas, HVAC, and plumbing. You can help protect your building's pipes and your rooftop with non-penetrating rooftop supports system, which include roof pipe supports, duct supports, access ramps, maintenance platforms, equipment supports and more. To ensure optimal performance and sustainability, non-penetrating rooftop supports systems are constructed from high quality steel components for insurmountable strength. All steel is hot-dipped galvanized to deliver a level of durability that even the most severe weather conditions cannot deteriorate. Each base is injection molded and specifically designed to handle the precise dead weight of pipes and equipment while allowing for variations in load distribution. By eliminating penetrations in your roof's protective membrane and building a product that is specifically designed to outlast industry standards.
Used for wall decoration, renovation, etc., divided into several uses: ceiling, partition wall, interior and exterior wall decoration, floor partition, etc.
Standard Size:1220 2440mm/ 1220 1830mm and customize Thickness:3mm. 5mm, 8mm, 10mm, 15mm, 18mm, etc. Material:PVC Color:White Certificate:ISO9000, ISO 14000, SGS Density:0.45, 0.5, 0.55, etc. Lead time: Sample order 2tons kgs 10-15 days, bulk order 10tons 5 days, 20tons 5-15 days.
GP Sheets Size 0.35-1.25mm(Thickness) 900/1000mm(Width) 1800-3600mm(length) Mass of coating(both sides included)grams per square metre(GSM)-120/180/275/350/450 GC Sheets Size 0.5-1.25mm(Thickness) 810/910mm(Width) 1800-3600mm(length) Mass of coating(both sides included)grams per square metre(GSM)-120/180/275/350/450 MOQ:30-50 Tons
