Liquefied Natural Gas is becoming one of the most important primary energy sources for 21st century. This is due to the large reserves throughout the world and because it is a relatively clean fuel. Natural gas produces about half the carbon dioxide compared to other fossil fuels, with very few undesirable emissions. Natural gas is the clean fuel choice as it helps solve two major environmental concerns: air pollution and the greenhouse effect. We supply LPG in small packing such as ISO tanks & bulk ...
Cabinet No.0259/3 - MOQ = 200 pcs No.0259/3 Unit Piece Product size 70 x 48 x 80 cm Packaging 1Piece/Package Material PP/ABS Color Blue, Pink, Green, White, Cream, Black V
Product category: 1. According to reinforcement: polyester felt(PY) , glass fiber mat(G) and glass fiber reinforced polyester felt(PY) 2. Acoording to isolation materials: upper surface: polyethylene film(PE), sand(S) and mineral slates(M) 3. According to membrane performace: I Grade and II Grade Features: 1. With high tensile strength, high elongation rate and strong adaptability to the shrinkage deformation and cracking of the infrastructure. 2. Excellent resistant to high and low temperature, applicable for hot and cold regions, especially for cold regions 3. Good resistant to acid and alkali corrosion, weather resistance 4. Construction convenience, hot melt method and cold adhesion method. Usage : SBS elastomeric bitumen waterproof membrane is widely used in all kinds of industry and civil building waterproof and seepage waterproof engineering: roof, basement, subway, tunnel, concrete payment bridges, sewage treatment plant, landfill field, canals, water pool, swimming pool etc.
International Standards Drums / Bulk containers
1. Introduction of waterproof membrane: Sbs modified asphalt waterproofing membrane is made from sbs (styrene butadiene styrene) thermoplastic elastomer modified asphalt as coating material, with high quality polyester felt (py), glass fiber mat (g), glass fiber reinforced polyester felt (pyg) as the fetal base, surface insulation materials as mineral slates, fine sand or pe film etc. 2.Product category: 1).According to the fetal base: polyester felt(py), glass fiber mat(g), glass fiber reinforced polyester felt (pyg). 2).According to the upper surface material: polyethylene film (pe), fine sand (s), mineral aggregate (m) . 3).According to the lower surface material :s, pe. ( sand granules size does not exceed 0.6mm). 3.Application range: 1).They are widely used in all kinds of industrial and civil building roof, basement waterproof and seepage-proof engineering; subway, tunnel, concrete pavement bridges, sewage treatment plant, landfill and so on .Water channel, water pool, swimming-pool and so on. 2).Glass fiber reinforced polyester felt base membrane is suitable for mechanically fixed single-layer waterproofing, but require wind load test. 3).Fiberglass mat base membrane is suitable for general roof and underground waterproof engineering. 4).The waterproof membrane of external leakage project use surface insulation material for the opaque mineral aggregates. 5).The waterproof membrane of underground waterproof project use surface insulation material for fine sand .
ZISTA GROUP was first established in 2005 as a trading group and during the last decade it has been expanding its network and business through China, Hong Kong, Iran, Singapore and several other countries worldwide. Please kindly check our website as below for checking our details and references: www.zista.co We are supplier and provider of all petroleum oils including Bitumen, Base Oil, Slack Wax, Paraffin Wax and Rubber Process Oil (RPO). Zista Group supply of Slack Wax is direct from Iranian Refineries and we have been empowered to develop market for Iranian Base Oil in East Asia. We are in position to supply different grades of Slack Wax as below: GradesAvailable Packaging Slack Wax H-16170 kg New Steel Drums 80 Drums per 20 FCL Slack Wax H-12 Slack Wax H-8 Slack Wax L-14 Zista Group is proud to announce its capability to offer Fixed & Formula prices both for Supply of Slack Wax in order for buyers to be able to manage short term and long term contracts, makes it possible to deliver the product anywhere in the world intact and with certified quality. We shall await to receive your genuine inquiry in order to advance to a long term mutual business, Please do not hesitate to contact us for any further discussions, Regards, Alireza Rahmani
Quick details Condition: New Place of origin: Zhejiang, china (mainland) Brand name: Noelift Model number: Tha10 Type: Powered pallet truck Power souce: Ac motor Rated loading capacity: 1000kg Max. Lifting height: 4500mm Min. Lifting height: 3000mm Fork length: 930mm Fork width: 100mm Overall dimensions: 2536*1080*2247mm Certification: Ce, gost, iso9001 After-sales service provided: Overseas third-party support available Wheel type: Polyurethane Motor type: Ac free maintenance motor Operator type: Standing Color: For your choice Self weight: 2340kg Full load speed: 4km/h Packaging & delivery Packaging details:international packing way, packed with thick plastic film. Product description Electric order picker features 1. Loaded capacity: 1000kg. Optional lift height: 3000-4500mm. 2. Environment-friendly: Low noise and non-pollution electricity enegy adopted ensure noelift electric order picker environment-friendly. 3. Reliability: 3.1:american imported curtis controller, quick reaction, strong ability of accerleration and deceleration control, ensure equipment longer service life. 3.2: eps technology adopted(electric steering system), more convenient and easy to operate. 3.3: bruthless ac driving motor, ensure 30% energy saving, lower maintenance cost. 3.4: mast buffer function can lower noise from impact of buffer mast’s junction points during lifting operation.Chain of anti-fracture. 3.5: equipped personnel safety protection rope to ensure operator's safety. 4. Strict quality inspection system: Iso9001-2008, ce approved.
We are in strong position to supply : Barium petroleum sulphonate Grades: 45% and 55% of purity. Loading from china by sea. For more details, please contact us. Best regards.
We supply fuel additive : Vanadium inhibitor, Two grades, For gas turbine Packing: 250 kg net in steel drum Quantity: 3000mt per month Please contact us for details if you need. Best regards.
Quick details Condition: New Place of origin: Zhejiang, china (mainland) Brand name: Noelift Model number: Ta10-20 Type: Powered pallet truck Power souce: Dc motor Rated loading capacity: 1000kgs-2000kgs Max. Lifting height: 3000mm Min. Lifting height: 1600mm Fork length: 1000mm Fork width: 160mm Overall dimensions: 1585mm*760mm*2060mm Certification: Ce, iso9000, gost After-sales service provided: Overseas third-party support available Semi electric stacker color: Red or yellow Semi electric stacker type: Standing operate Semi electric stacker brake: Electric brake system Packaging & delivery Packaging details:International packing way, packed with thick plastic film. Delivery detail:15days after advance payment Product description 1-2ton semi-electric stacker economic cheaper 10days delivery after advance payment With eps steering system, easier operater Semi-electric stacker, ta series steering wheel pallet stacker, rated load capacity: 1000kg, 1500kg, 2000kg, lift height: 3500mm, used for single face pallet; 1. With eps steering system, easier to operation; 2. Electronic trpe braking; 3. To use intelligent charger, auto analysis the residual energy and optimizing the charging process, without manual operation and extend the battery working life effectivly; 4. Speed limited for high position, to aviod the possibility of products' overturning when high speed in high position; 5. High strength overhead guard to protect the operator
Full ac 4 wheel electric forklift features 1.Loaded capacity: 2ton, 2.5ton, 5ton. Optional lift height: 3000-6000mm. 2. Environment-friendly: Low noise and non-pollution electricity enegy adopted ensure noelift 3-wheel electric forklift environment-friendly. 3. Reliability: 3.1: two of the kinematic each a precursor is independent motor drive, can be separated into gear and motor two parts, each motor driver is a single and complete transmission device, it is superior performance, self-control and safe operation of the strong double driver. 3.2: better stability:low layout for battery , low center of gravity; 3.3: full hydraulic power-assisted steering system, easy to steering and save the energy; 3.4: curves safe control: the speed will automatic reduced when turning, to aviod the possibility of rollover; 3.5: regenerative braking function to increase the working hours for forklift; 3.6: better durability: unitary frame with better strength and rigidity, 3.7: full ac technology with high efficiency and reliability; 4. Used place: Apply to massive stacking level carrying cargo/discharge goods single/double tray, is similar to the flat cement and asphalt pavement. 5. Strict quality inspection system: Iso9001-2008, ce approved.
We are in strong position to supply : Tbn booster, Tbn 400, Calcium sulphonate Top quality, Loading from china by sea. For more details, please contact us. Best regards.
Gasoline and diesel engine oils, ATF, Greases, Hydraulic oils, Brake oils etc.
Scope Lubricant liquid rust meter according to national standard GB / T11143 prescribed design and manufacture of metal corrosion can be determined when the lubricating oil, hydraulic oil, turbine oil and other fats in water Features 1, the LCD screen English display interface, menu prompts input; 2, the use of computer programs temperature control, high precision, good accuracy; 3, user-friendly design, the instrument automatically timed, when the reminder alarm; 4, instrument software interface displays a variety of parameters such as clocks date and current tips; 5,4 group sample design, the user can choose to open any one set of experiments, without disturbing each other according to their own circumstances; Technical Parameters 1, temperature range: room temperature ~ 100 ? 2, temperature accuracy: ± 0.5 ? 3, when the control range: 0 to 99 hours arbitrarily set 4, stirring speed: 1000r / min 5, the maximum power consumption of 2500W 6, Sheng-like holes: 4, customers can turn to any one set of experiments, interfering 7, ambient temperature: room temperature ~ 35 ? 8, relative humidity: =85% 9, the power supply voltage: AC220V ± 10% 50Hz
Zista group was first established in 2005 as a trading group and during the last decade it has been expanding its network and business through china, hong kong, iran, singapore and several other countries worldwide. Please kindly check our website as below for checking our details and references: Www.Zista.Co We are supplier and provider of all petroleum oils including bitumen, base oil, slack wax, paraffin wax and rubber process oil (rpo). Zista group supply of base oil is direct from iranian refineries and we have been empowered to develop market for iranian base oil in east asia. We are in position to supply different grades of base oil as below: GradesAvailable packaging DrumFlexiBulk Base oil sn 150VV Base oil sn 500VVV Base oil sn 600VV Base oil is a commodity which has worldwide consumption and price reference, depending on international references such as argus & icis for the middle east supply. Zista group is proud to announce its capability to offer fixed & formula prices both for supply of base oil in order for buyers to be able to manage short term and long term contracts, while having an open hand in the available packaging and especially flexi bags, makes it possible to deliver the product anywhere in the world intact and with certified quality. We shall await to receive your genuine inquiry in order to advance to a long term mutual business, Please do not hesitate to contact us for any further discussions, Regards, Alireza rahmani
1, in the use of the paving machine, how to do a good job in the maintenance of hydraulic system? Answer: in the use of the paving machine, do a good job in the maintenance of hydraulic system, you can greatly reduce the fault. General should pay attention to the following points: (1) hydraulic oil in hydraulic tank joined the former, should use clean containers of oil, hydraulic oil must be after oil filter filter, then add the hydraulic oil tank; the replacement cycle of the hydraulic oil as the oil quality and (1000h changed once; replacement of hydraulic oil should be in the working temperature; in order to ensure good heat dissipation of the hydraulic system, should also regularly clean hydraulic oil radiator. (2) due to the asphalt paving machine construction environment is generally relatively poor, hydraulic oil filter replacement cycle should also be shortened (generally was750h is appropriate), replacing with a new filter element, when should be checked, prohibited the use of deformed, pollution or rusty filter. (3) in the daily start of the engine work, should be idle for some time after the operation, and then to control the implementation of components, so that the use of hydraulic pump. (4) due to the long-term use, the hydraulic system parameters will change, therefore, should be regularly check the hydraulic system parameter settings, to be adjusted in time.
Specification Value Test Method Penetration @25°C 85-100 ASTM D-5 Specific Gravity @ 25°C 1.01-1.06 ASTM D-70 Softening Point °C 45-52 ASTM D-36 Flash Point °C 225 min ASTM D-92 Ductility @25°C 100 min ASTM D-113 Loss on Heating %wt. 0.5 Max ASTM D-6 Drop in Pen. After Heating % 20 Max ASTM D-6 & D-5 Solubility in TCE %wt. 99.5 min ASTM D-4 Spot Test Negative A.A.S.H.T.O.T 102 Bitumen Penetration Grade 85/100 (also known as 80/100) is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses .
Specification Value Test Method Penetration @25°C 40-50 ASTM D-5 Specific Gravity @25°C 1.01-1.06 ASTM D-70 Softening Point °C 52-60 ASTM D-36 Flash Point °C 250 min ASTM D-92 Ductility @25°C 100 min ASTM D-113 Loss on Heating %wt. 0.2 Max ASTM D-6 Drop in Pen. After Heating % 20 Max ASTM D-6 & D-5 Solubility in TCE %wt. 99.5 min ASTM D-4 Spot Test Negative A.A.S.H.T.O.T 102 Bitumen Penetration Grade 40/50 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses.
Specification Value Test Method Penetration @25°C 60 IS 203 Absolute Viscosity @60°C, Poises 1600-2400 IS 1206 Kinematic Viscosity @60°C, Poises 300 IS 1206 Softening Point °C 45 IS 1205 Flash Point °C 220 IS 1448 Solubility in CS2 %wt. 99.0 IS 1216 Test on residue from rolling thin film oven test Viscosity Ratio @60°C 4 IS 1206 Ductility @25°C 50 IS 1208 VG-20 is usually used for paving in cold climate & high altitude regions
Specification Value Test Method Penetration @25°C 35 IS 203 Absolute Viscosity @60°C, Poises 3200-4800 IS 1206 Kinematic Viscosity @60°C, Poises 400 IS 1206 Softening Point °C 50 IS 1205 Flash Point °C 220 IS 1448 Solubility in CS2 %wt. 99.0 IS 1216 Test on residue from rolling thin film oven test Viscosity Ratio @60°C 4 IS 1206 Ductility @25°C 25 IS 1208 VG-40 is used in highly stressed areas such as intersections, near toll booths and truck parking lots in lieu of old 30/40 Penetration grade. Due to its higher viscosity, stiffer Bitumen mixes can be produced to improve resistance to shoving and other problems associated with higher temperature and heavy traffic loads.
