LUBENZ FLUX BRAKE FLUID 3 DOT 3 are supreme performance hydraulic brake fluid based on polyethylene glycol ether technology to provide a high level of brake and clutch performance in automotive and commercial vehicles. They are designed to meet or exceed the general requirements of most builders of automotive disc, drum and anti-skid brake systems and clutch systems.
LUBENZ SP FLUSHING OIL is a solvent free, fast acting, engine cleaning formulation that removes engine depos- its, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes. The solvent free formulation protects gaskets and seals from damage during the cleaning process.
SYNTHECH MOTOR OILS SAE 5W-20 / 5W-30 / 5W-40 / 10W-30 / 10W-40 / 20W50 API SN/CJ-4, SN/CF, SM/CI-4, SM/CF LUBENZ INFINITY SM series is designed with semi-synthetic base stocks and advanced technology additive system to provide very high level of engine protection and performance. It is suitable for higher mileage gasoline fueled automobiles and light duty trucks requiring an API SM/CF specification, where very high viscosity index oils are preferred to provide longer oil drain intervals in modern engines and better oil consumption control in older vehicles where oil usage (burning) is an issue. for mor information, please contact us.
We supply Bitumen in Bulk Vessel, Jumbo Bag, Barrel packing.
It is used to shrink pvc seal of filled lpg cylinder. 1000*1000*1000
As agreed. As agreed
Bamboo Tar is a viscious liquid which can be used for pest control and can even fray away snakes, it can also be used for preserving wood, for construction purpose, for insulation of ceiling.
It is used in gear oil and anti-wear hydraulic oil. Recommended dosage:  about 1.5%.( wt%) Solubility: Insoluble in water, soluble in most organic solvents such as ethanol and benzene store in a cool and ventilated warehouse. Stay away from sparks and heat sources. Keep the container sealed. It should be stored separately from oxidants, acids, and edible chemicals, and should not be stored together. Equip corresponding types and quantities of fire-fighting equipment. The storage area should be equipped with emergency response equipment for leaks and appropriate containment materials.The shelf life is approx. 24 months
Application &typical recommended dosage: PIB1300 is specially designed for Ashless Dispersants, Gasoline Detergents,, 2-stroke Engine Oil, Supercompressor Oil, Hydraulic Oil, Gear Oil, Metal Working Liquid, Lubricant Grease, Tail Grease etc, also used for sealant, coating, adhesive. 10%--60% Benefits: Good oxidative stability Good emulsification, compatibility and fluidity High temperature decomposition No sulfur, nitrogen and oxygen Storage: In accordance with local regulations, store in original container protected from direct sunlight in a dry, cool and well-ventilated area. Keep container tightly closed and sealed until ready for use. Package: 180kg/drum
SHIPMENT LOAD 2,000,000 BARRELS PER VESSEL SPECIFIC GRAVITY: 0.8459 API AT 60 DEG. F: Min 33.0 - Max 37.00 +/- 5% (ASTM D-1298) WATER CONTENT BY DISTILLATION: 0.2% (ASTM D-4006) POUR POINT DEGREES F: BELOW 40 (ASTM D-97) SULFUR WEIGHT %: 0.14 (ASTM D-139) SALT CONTENT PARTS PER BILLION: 3.0 (ASTM D-526) REID VAPOR PRESSURE (P.S.I.G.): 6.52 (ASTM D-529) KINEMATIC VISCOSITY @ 30 DEG. C: 2.2 (ASTM D-523) DISTILLATION INITIAL BOILING point (IBP): 35 DEG. C (ASTM D-86) DISTILL TO 75 DEG. C VOL. %: 7.0 DISTILL TO 175 DEG. C VOL. %: 35.5 DISTILL TO 250 DEG. C VOL. %: 51.5 DISTILL TO 300 DEG. C VOL%: 60.5 COLOUR: Dark Brown
Runlube 829 refers to 5,5'-dithiobis-1,3,4-thiadiazole-2(3h)-thione ,also called Vanlube 829 CAS: 72676-55-2. It is an anti-wear EP additive containing sulfur. It can be used as extreme pressure additive for lubrican greases and Also used in rubber industry. Chemical Name: DMTD dimer Storage: In accordance with local regulations, store in original container protected from direct sunlight in a dry, cool and well-ventilated area. Keep container tightly closed and sealed until ready for use. Package:  25kg/drum with pallet
Application: Runlube 8088 white is a synergistic compound of high purity inorganic materials containing sulfur and phosphorous. It can be used as a solid lubricant and many other fields of application to replace MoS2 in grease and plastic , masterbatch etc. The key benefits are: A significant reduction of coefficient of friction and wear An improvement of emergency running properties An improvement of sliding, rotating friction and durability The formation of stable layers of different contact surfaces over a wide temperature and pressure range Excellent tribological characteristics White color Storage:� In accordance with local regulations, store in original container protected from direct sunlight in a dry, cool and well-ventilated area. Keep container tightly closed and sealed until ready for use.
Application: RP7100 is a liquid rust preventive additive that contains a minimal amount of wax giving good barrier properties for improved rust protection along with low viscosity.Which can often be blended into many diluents with little or no heating required resulting in lowered energy use and faster process times. RP7100 is a premium thin-film, water displacing rust preventive that provides excellent protection against salt and humid atmospheres when formulated in petroleum solvent and or oil solutions. RP7100 is designed specifically to offer the quickest demulsification time while providing excellent solubility and stability in the widest ranges or solvents, oils and blends. When formulated and tested in the B-117 salt atmosphere test, RP7100 has demonstrated over 72 hours of protection yet the film is easily removed. RP7100 also provides excellent water separating and displacing properties. It is non-staining on a variety of ferrous and non-ferrous metals. RP7100 does not contain barium or other heavy metals. Benefits: Liquid at room temperature and easy to use Excellent salt spray and humidity protection Excellent water-displacing and water-separation No barium or other heavy metals Non-Staining Storage:� Store in a dry place at room temperature approx. 24 months Package: 200kg/barrel Handling:  Consult material safety data sheet (MSDS) for additional handling information of  RP7100.
Application: RP7188 is a liquid rust preventive package which contains a minimal amount of which includes the Barium soap of an oxygenated Hydrocarbon Formulations based on this material deposit a thin waxy film that provide exceptional protection to Ferrous metal surfaces. RP7188 is capable of exceeding 72 hours protection in salt spray environments as measured by ASTM B117. In addition products prepared using RP7188 offer outstanding water displacing, water seperating and non staining properties. Benefits: Liquid at room temperature and easy to using Excellent salt spray and humidity protection Excellent water-displacing and water-separation Non-staining - safe for use coiled or stacked parts Storage:� Store in a dry place at room temperature approx. 24 months Package: 200kg/barrel Handling:  Consult material safety data sheet (MSDS) for additional handling information of  RP7188.
Oil spill dispersant utilizes the molecular interaction principle to pull apart oil spills from the state of aggregation to the smaller oil water emulsion in the molecular state to make the oil spills on the water surface uniformly dispersed into the water system, so as to eliminate the oil spill pollution on the water surface. This product can be widely used in waters of seas, harbours, oil ports, wharfs and other site where there are oil spill to be disposed of. It is particularly suitable for the open water system and on the occasion where the sea conditions is rough, oil spills cannot be recovered, or the oil spills is too thin to recover. Blend of dispersants and solvents, converts hydrocarbons into fine emulsions Very effectively disperses mineral oils, crude oils, residual fuel oils, diesel fuel oil, kerosene, white spirit and lubricant oils Diminishes the overall damage to the environment Does not contribute to pollution Biodegradable, Non-toxic product Ready to use product Model Number Dimension Package HAODA-OSDP101 25L/Bin Plastic Bin
Oil Separator Element 1613688000 for Atlas Copco Screw Air Compressor Repair Part 2901021300 2901021301 1613688001.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
Ingersoll Rand Replacement Screw Air Compressor Part (54595442) Air Oil Separator.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
Replacement For Atlas Copco Mobile Machine Air Oil Separator 2911011700 1604132880 2205176172 2911011701.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
Oil Separator 6.2013.0 6.3623.0 6.1965.0 for KAESER Compressor.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.