Flushing Oil

Sino-NSH-LF oil flushing system is used to remove harmful contaminants for a large oil system, such as hydraulic control systems, rotating equipment lubrication system, and turbine/generator unit, etc. It will keeps the equipment operating at peak performance and reducing the potential for failure. NSH oil flushing system adopts American advanced fast flushing the system, It not only can purify particles, fibers, clay, or even water and a variety of pollutants in the oil, but also a large number of oil need for rapid purification of the occasion. LF series has high efficiency, low cost, easy operation, safety and reliability.

Portable Oil Filtering and Flushing Machine for Series JL Portable Oil Filter Machine Portable Oil Filtering and Flushing Machine for Series JL Application Series JL portable oil filtering machine can do precision filtering, remove the tiny or big sized impurity, particleï¼?sediments,and sludes from waste oils.  Such asl lubricant oil, hydraulic oil,turbine oil,gear oil,and industrial oils etc. It can also as a pre-filter for all oil treatment equipments  Series JL Oil Flushing machine is composed of high pressure pump, oil storage tank and precise filtering, this machine is an ideal machine for cleaning the dirty oil pipes of those hydraulic equipments,Gear ,turbine equipments as well as collecting and purifying the waste oil come back from the pipes. It can efficaciously remove impurities including sludge and carbon matters from oil, so as to recover the oil nature and make the machine work normally and effectively, for maintaining the hydraulic equipment from blocking and corrupting by impurities. It will greatly prolong the oil and equipments service life. Feature 1.Using high-quality filter, pollutant carrying capacity, corrosion resistance, high temperature resistance, high mechanical strength, high precision filtering 2.The oil can get to the new oil standard after filtering the mechanical impurities in it 3.Provide the best performance and the most compact design 4.High efficiency, low noise, long life

LUBENZ SP FLUSHING OIL is a solvent free, fast acting, engine cleaning formulation that removes engine depos- its, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes. The solvent free formulation protects gaskets and seals from damage during the cleaning process. for more information, please contact us.

Vacuum Turbine Oil Polishing and Flushing Machine for Series TY Vacuum Turbine Oil Purification Plant Vacuum Turbine Oil Polishing and Flushing Machine for Series TY Application: TY Series Vacuum Turbine Oil Polishing systems can remove free, emulsified, and dissolved water quickly and effectively to improve system performance and reduce your operating and maintenance costs. It aims at turbine oils nature of high water content, easy emulsifiable and high impurity content, and make the oil recover to the new oil's nature. It can also mounted on high pressure pump for flushing requirements Series TY oil purifier is widely used for filtering turbine lubricating oil in electric power, metallurgical, chemical engineering industries. It is good at emulsion breaking, dehydration and removing soap, gelatin, acid, pigment and metal particulates in emulsified turbine oil and low-viscosity lubricating oil as well as turbine oil used in other machinery and electric power equipment. Feature: 1. Breaking emulsification thoroughly with high- molecule polymeric material. 2. Dewatering very effectively with once and for two steps dehydrating method. It can thoroughly clear away the liquid water, free water and 80% dissolved water 3. With distinctive removing impurities technique filtering through double FH trapezoidal network and absorbing by high polymer material, this machine can make the Ã?3 equal or surpass 200 and make the cleanness lower grade 6(NAS1638). 4. With the trapezoidal, spiral, automatic back flushing system. 5.With the advanced dielectric condensation devices. On-line oil purification can be carried out with turbine or water turbine automatically without any person. Technical Parameter item unit TY-10 TY-20 TY-30 TY-50 TY-100 TY-150 TY-200 Flow rate L/h 600 1200 1800 3000 6000 9000 12000 Working vacuum degree Mpa 0.06 0.095 Working pressure Mpa 0.3 Running temperature 40 70the temperature of turbomachine below 55 Heating power KW 14 16 18 30 45 55 60 Total power KW 16 18 20 33 48 61 71 Inlet/outlet caliber mm 25 25 25 32 42 50 50

Supplier: Lubricants, base oil, motor oil, gear oil, hydrolic oils, flushing oils, brake fluid, greases

Supplier: Used engine oil, used, new transformer oil, used, new hydraulic oil, furnace oil, mixed hydrocarbon oil, flushing oil, base oil , fuel oil , rubber processing oil, used cooking oil

The main function of Lubricating Oil Purifier is to purify the contaminated lubricating oil, motor oil, gear oil, hydraulic oil, compressor oil, turbine oil and restore its original performance, it is a professional oil filtration machine. In the purification processing the filter residue accumulation, resistance increased, flow rate slow, should stop work to cleaning residue. When Lubricating Oil Purifier removes impurity, pay special attention to filter on the stainless steel wire mesh deformation or damage, otherwise, when installed filters again, the purity of the filtered medium can not meet the design requirements, compressor, pump, instruments and other equipment will be destroyed, once found that stainless steel wire mesh deformation or damage should be replaced immediately. The filter element of Lubricating Oil Purifier is composed of special materials, is easily damaged parts, need special protection; When fine filter work after a period of time, the filter to block a load of a certain amount of impurities, the pressure will increase, flow rate will decline, need to remove the impurities in the filter system in time, at the same time to clean the filter element.

Turbine oil is usually use in gas turbines, and other applications requiring supreme quality turbine oil. Turbine oil cleanliness continues to cause concern because to have optimum performance the oil has to be significantly clean. The current inventions of Turbine Oil Purification Plant are widely categorized under different types of filtration methods depending on its objectives or applications. The existence of iron components in industrial turbine oil makes magnetic filter is the effective tools for capturing as well as recycling of small sized magnetic particles. Turbine oil correction can be quite exhaustive and detailed in nature. Series TOP Turbine Oil Purification Plant is special designed for turbine oil, lubricating oil and cooling oil to removing a large amount of moisture and impurity. Such as power plants, power station steam turbine in the process of running, moisture, dust and impurities will be mixed in the turbine oil, will accelerate the oxidation of oil, and changed with foam, fouling and oil sludge, cause the oil emulsified serious, and lead to oil-water separation more difficult, reduce the oil performance of lubrication, speed, cooling etc. Meanwhile caused the metal parts of turbine steam to corrosion, bad for the safe operation of steam turbine. So TOP Turbine Oil Purification Plant is a special maintenance equipment for power plant and power station.