PTC heater element is used for wax heater with its special characteristics of self-regulating,rapid heating and easy for mounting.. This PTC heater assembly is used for wax warmer,scent warmer and depilatory etc. Neon lamp is an option for replacement of LED dimensions of PTC heater element is upon specific requirements of customer temperature range from 80 to 300Celsius Different lamps are to be made with your requirement. Aluminium profile and power cords are also available for wax heater
Melting machine.
PTC heaters for floor standing and central air conditioner are constituted by PTC components, which are connected with heat sink strips by insulation layer, which is replaced by Aluminum tube in JX series. Parallel rows are added to increase windward surface so as to increase power with size unchanged. All products has outstanding performance in electrical strength, heating up and safety. Besides, we also design and produce customized products. Parameters: Item Parameters Rated Voltage (V) 12~380V Rated Frequency (Hz) 50(60) Size of radiator (mm) 200~700 Rated power range (W) 500~3500 Power tolerance (%) +5~-10 Insulation resistance (M¦¸) >=100 Electric Strength (V/min) 1500 PTC withstand voltage (V) 450 Power decay rate (%)
Specifications: 1) defrosting heater: applicable to indirect-cooling refrigerator, cooler, air-conditioner, pipe heater and some home appliance. 2) material: quartz tube 3) ambient temperature: -60ípc ~ +85ípc 4) resistant voltage in water: 2, 000v/min (normal water temperature) 5) insulated resistance in water: 750mª+ 6) power error (resistance): ía7% 7) firmness of connection end: í²50n 8) heavy duty glass construction 9) protective oxide coated element wire for long-term heater life 10) high temperature molded silicone end caps 11) special hard end caps 12) can be manufactured to proper length Any
Specifications: 1) defrosting heater: applicable to indirect-cooling refrigerator, cooler, air-conditioner, pipe heater and some home appliance. 2) material: quartz tube 3) ambient temperature: -60c ~ +85c 4) resistant voltage in water: 2, 000v/min (normal water temperature) 5) insulated resistance in water: 750mª+ 6) power error (resistance): a7% 7) firmness of connection end: ²50n 8) heavy duty glass construction 9) protective oxide coated element wire for long-term heater life 10) high temperature molded silicone end caps 11) special hard end caps 12) can be manufactured to proper length Any
Drum heater: Through heating up the liquid in the barrel, the coagulation can be easy to take Out, such as the adhesive agent in the barrel, bituminous, the grease, the pitch, The paint, the paraffin wax, the oil and respectively resin raw materials. The size Can be made as per your requirements. Drum heater and pail heaters drum and pail heaters can provide practical, Efficient means of freeze protection, viscosity control and maintenance of Materials at elevated temperatures. Drum and pail heaters conduct heat Through the drum wall to the product inside. Adjust the thermostat to Automatically maintain the correct temperature. We have alll kinds of drum and Pail heaters for various sizes, from 5-gallon drum and pail up to a 55-gallon Drum and pail. Drum heaters can operate at higher temperatures and work faster On metal drums. We also have more gentle drum heaters for your plastic and fiber Drums. Heating element in durm heater is laminated between two layers of 0.6mm Fiberglass reinforced silicon rubber and has an adjustable thermostat that goes From 50íp f to 410íp f (10íp c to 210íp c). Each heater band is equipped with a Six-foot cord set (230 volt heater bands without a plug). A built-in metal Screen is grounded electrically for safety. All heaters are high potential Dielectric tested at 1500 volts at the factory. Drum heaters are available with Either a 115 or 230 volt rating. Drum and pail blanket heaters Drum blanket heaters provide more efficient, more uniform heating with better Temperature control. Rugged aluminized cloth has 1" of fiberglass insulation for Less heat loss and increased worker safety. Provides outstanding freeze Protection, as well as temperature and viscosity control. Velcro fasteners make Installation easy for a single person. Any
1) floor heating mat:the latest innovation of heat insulation consisting of extruded polyester (xps) 2) two different sized thicknesses 1200x600mm x 6mm or 10mm 3) easy to roll out onto your surface area. 4) easy to cut to suit your room 5) waterproof 6) thermal conductivity w/mk 0.029 7) can withstand loads of 30 tonne per m2 8) 60% increase in home heat efficiency Technical data Floor heating mat Max power loading - 150w/m2 or 200w/m2 Diameter - 3.0mm - 4.0mm 230v supply Twin conductor heating cable with single 3m í¦cold tailí¦ connection lead Any
1). The leads material: pvc or silicon rubber 2). Pvc heat resistant temperature: 105oc Silicon rubber heat resistant temperature: 180oc 3). Ambient temperature : pvc is -40oc~+85oc Silicon rubber is -60oc~+85oc 4). Resistant voltage in water: 2000v/min(normal water) 5). Insulated resistance in water : 100 mega ohm 6). Tolerance power(resistance) : GípÇ7% 7). Fastening intensity of terminal: Gíp¥50n 8). It is widely used on refrigerators, air-conditioning and many home appliances We can make different size heater and heating wire according to your requirements such as different voltage, different power, different length and different width. Refrigerator heat
High frequency induction heating equipment Power: 7kw/30kw Frequency: 50-200k Application: brazing, hardening, forging, melting Feature: Igbt inversion technology Good for smaller parts Heating rapidly Customized coil according job detail Good at hardening
Special induction equipment Other application Shrinkage fitting, water boiling, bolt heating, steel plate heating, stub drying, railway rivet heating etc. Xrf sample preparation equipment Duolin induction power supplies provide heating solutions to various applications.
Equipment Main Characteristics Our company established in 1995, has more than 10 years experience in making resistance welding machines and induction heating equipment. To meet the demand of heating needs, we developed the KIA-1KW mini induction heater with our partner This device adopt Electro-Magnetic induction theory, can fast heat small metal parts on auto or machines. Mainly used for heating Rusted/ Frozen/ Corrosive Bolt, Nut, Fasteners, Suspension Nut, Gears, Pulley, and Bearings etc. Meanwhile, it also can help removing stickers on cars. Heating Abilities: In around 30 seconds, it can heat a 20mm diameter bolt to a temperature above 300 C, maximum temperature can reach around 750 C. The advantage if using this device is it is totally flameless, comparing with traditional way of heating by fire, it is much safer and of higher work efficiency, without the worry of harming the adjacent area. Light weight, do not need water cooling, and very easy to use. Main technical parameters Model Number KIA-1KW Certificate CE(EMC,LVD),UL,CCC, Available for COC, POVC Rated Voltage 110V/220V AC 50/60Hz Rated Power 1000W Induction Coil Diameter Quantity 30mm2(PCS), 40mm 2(PCS), 50mm 2(PCS), Spare Wire 2(PCS) Heating Bolt Diameter 5-40mm Plug Type Type H, Type B, Type G, Type E Net Weight 1.3KG Heater Dimension 30cm 6.8cm 6.8cm
