KDE1204PKV1 MS.A.GN 12V 0.8W 2 Wires Cooling Fan Micro mini Fan Use for Mini Case/Router/switch/Diy devices.
Apex Industries is the prominent leading Manufacturer & Exporter of finest quality Air Handling Units (Pure Air Purifier / Treated Air Ventilation System) for Pharmaceutical, Hospital, Modular Operation Theater and other all Air-conditioning applications, Our products construction heaving rigid framework for the unit comprises an assembly of externally chamfered extruded anodized aluminum profiles and nylon glass fiber corner joints, and incorporated with polyurethane foam, 25 mm / 43 mm / 50mm thick pressure injected sandwiched panels, also we makes the entire unit anti-corrosive and sweat free (thermal break). and imported self-drilling and self-tapping galvanized sheet metal screws adds to the aesthetic & more times stronger of the framework.
ZL-3 model steam air heater with upper outlet and lower inlet is consists of 9 parts: steel-aluminum radiator fin tube + electric steam valve + drain valve + insulation box + fan + Fresh air damper + waste heat recovery device + dehumidification fan + electric control system. It is specially designed for supporting downflow drying room/heating rooms. After convert the outside steam heat to heat inside the insulation box through by the fin tube, it�´s mixing with recycle or fresh air, under the action of the fan, it is discharged from the upper outlet into the drying room or heating space. Then cooled air pass through the lower air outlet for secondary heating and continuous circulation. And when the humidity of circulating air reaches the emission standard, the dehumidification fan and fresh air damper will start simultaneously. The exhausted moisture and fresh air implement sufficient heat exchange in the waste heat recovery device, so the moisture is discharged and the fresh air with recovered heat enter the circulation system. Advantages/features 1. Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3. Stainless steel electric heating finned tube, durable 4. Steel-aluminum finned tubes, high heat exchange efficiency. The base tube is made of 8163 seamless tube which is pressure-resistant and durable; 5. Electric steam valve controls the amount of inlet, automatically cuts off or opens according to the set temperature, so that can accurately controls the temperature. 6ï¼?High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. Integrating the dehumidification and fresh air system, heat loss is extremely small through by the waste heat recovery device. 8. Automatically replenish fresh air
ZL-2 model steam air heater with Left-Right Circulation is consists of 7 parts: steel-aluminum radiator fin tube + electric steam valve + drain valve + insulation box + fan+ Fresh air damper + electric control system. It is specially designed to support the left and right circulation drying room. For example, the 100,000 kcal model drying room, it is equipped with 6 fans, three on the left and three on the right. When the three fans on the left rotate clockwise, the three fans on the right rotate counterclockwise in a cyclic alternating manner, forming a relay, The left and right sides serve as air inlets and outlets alternately, taking out all the heat generated by steam heater. It is equipped with an electric fresh air damper to supplement fresh air in coordination with the dehumidification system in the drying room/drying place. 1.Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3ï¼?Steel-aluminum finned tubes, high heat exchange efficiency. The base tube is made of 8163 seamless tube which is pressure-resistant and durable; 4. Electric steam valve controls the amount of inlet, automatically cuts off or opens according to the set temperature, so that can accurately controls the temperature. 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. left and right fans run alternately in cycles to ensure even heating 8. Automatically replenish fresh air
ZL-1 model Steam air heater with upper inlet and lower outlet is consists of 6 parts: steel-aluminum radiator fin tube + electric steam valve + drain valve + insulation box + fan + electric control system. Steam passes the though the fin tube, dissipating heat to the insulation box, mixing and heating the fresh or recycle air to setting temperature, fans bring this hot air into drying room or heating room to be used for dehydration, dehumidification or heating. 4. Advantages/features 1. Simple structure, beautiful appearance, low cost 2. Steel-aluminum finned tubes, high heat exchange efficiency. The base tube is made of 8163 seamless tube which is pressure-resistant and durable; 3. Electric steam valve controls the amount of inlet, automatically cuts off or opens according to the set temperature, so that can accurately controls the temperature. 4. Large air volume and small wind temperature fluctuation 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating.
Thermoelectric cooling systems, Thermoelectric coolers, Thermoelectric cooling asssembly, Thermoelectric cooling devices, Air coolers., air cooling systems, peltier cooler Part No.: WFF-60 Rated Voltage: 12V/24V Input Current: 7.3A /3.8A Cooling Power: 60 W Size: 200*133*146.6 mm Weight: 2.6Kg Thermoelectric cooling systems, Thermoelectric coolers, Thermoelectric cooling asssembly, Thermoelectric cooling devices, Air coolers., air cooling systems, peltier cooler Part No.: WFF-150 Rated Voltage: 12V/24V Input Current: 16.5/8.2A Cooling Power: 145 /150 W Size: : 300*160*170 mm Weight: 4.5Kg Thermoelectric cooling systems, Thermoelectric coolers, Thermoelectric cooling asssembly, Thermoelectric cooling devices, Air coolers., air cooling systems, peltier coolers Part No.: WFF-200 Rated Voltage: 12V/24V Input Current: 22.4 /11.5A Cooling Power: 201/205W Size: 400*180*198 mm Weight: 7.1Kg We can provide OEM design, please do not hesitate to contact us if you have any requirement.
1. The surface layer adopts super soft and porous design to enhance penetration and absorption 2. The cool chip design prevents genital itching caused by sweltering heat and humidity 3. Super absorbent, the surface will not rewet wet.
1, The product use Panasonic compressor and fan motor. 2,The compressor, which is of the international famous brand, cools and heats powerfully, operates most smoothly, and runs on low load. service life is extended. 3, The operation is calm and silent. The air conditioner adopts the advanced off-center blades and foam air duct. The high performance low noise blower is adopted. The noise reduces remarkably. 4, It is provided with the microcomputer control technique. The remote control and the control panel can be applied interchangeably. The operation is convenient and simple. The air conditioner is also provided with an automatic detection display system. You will feel beneficial, . comfortable, and enjoyable with our FreeCool conditioner 5, Uses 4 standard 12v (or 8 pcs6v) deep cycle solar batteries 6, Uses standard 200w 48V solar panels. 7,Automatic cleaning function , Antibacterial filter net, Negative ion, Vitamin C and anti-acarid, New appearance, digital display, Three-bend evaporator 8,Remote control with big LCD, High efficiency cooling / heating, Double muting technology. Size: Indoor Unit 745*255*195mm Outdoor Unit 645*245*495mm Solar Panel 1074*801*165mm Battery 645*245*495mm Weight: Indoor unit:11/13kg Outdoor unit:38/40kg Solar Panel:50/65kg Battery:30/38kg.
Air conditioner
We supply all type of air condoning components like heat exchangers, sheet metal components, injection molding components, and system tubing and motors. For price, specifications and more details please contact us
Saad Industrial Doors best suppliers of Commercial Air Curtains in Saudi Arabia. We provide at very affordable price products and installation services at your door step.
Indoma Industries P. Limited, who have transformed the Air cooler industry with their Littelpump submersible pumps, now introduce their innovative CONDENSATE DRAIN PUMPS for taking care of water drainage of Split ACs in your home/offices. The small SLIMLINE pump with collection unit, installs inside the air conditioner, making it totally invisible to the eye. It collects the condensate and pumps it out automatically, be it near the outdoor unit or elsewhere. Supremely suitable for places such as basements or where ever gravity led drainage of water is not possible or desired. A super effective solution surely. So say bye bye to the unseemly buckets and pipes and say hello to the Slimline condensate pumps. Another convenience product from the famed Littelpump.
Axial Flow Draft Fan: * Application conditions: Working voltage: 110V ranged from 85V to 125V; 220V ranged from 190V to 245V Operating temperature: -10C ~ 60C Operating humidity: 20% ~ 85% Insulation resistance: 10M at 500VDC between lead and frame Dielectric strength: 1 minute at 1500VAC/50-60Hz Current:
DL series air coolers Product description: 1. The dl series products are air coolers applicable to various cold storage houses. 2. They are divided in different groups by temperature, the dl group for 0ºc 3. All the products are anti-rusty, corrosion proof, and high reliability. 4. Long air duct is capable to fixed with the products. 2pcs/ctn
CD series air cooled condenser Products description: 1. The CD series products are air cooled heat exchanger for refrigeration system. 2. The air flow all the flowing out by side. 3. All the products have been tested on 2.8mpa air leakage. 4. The system is disposed of pollution. 5. Applicable to r22, r134a, r404a, r407c systems. 2pcs/ctn
We supply roller blinds, zebra blinds, roman blinds, panel shade, vertical blinds, horizontal blinds. Finished blinds and also distribute fabric(sunscreen, blackout, zebra).Components and accessories.
Product description: 1.Lx-series, power: 1hp to 20hp 2.Professional impeller designed, powerful air flow and high pressure. For lx-series type, satisfied to convey various plastic materials. 3.Light weight, the housing of machine is cast by aluminum alloy. 4.We all use high temperature copper wire for making our motors. (f/h level) longer the motor's usable life. 5.Manufactured suitable size of outlet and inlet flange according to customer requirements. 6.All superior materials are made and manufactured in taiwan, exceptional quality. 7.Two types of outlet directions, blowing up level and horicontal level, we can manufacture according to customer needs. 8.Furthermore, special designs of wind-adjuster adapter, using for offer stable air flows and easily control winds amount.
Product Usage: 1. blast stoves, plastic, printing of 2. cooling, drying 3. send machinery exhaust Features: 1. do single phase or three-phase power supply. 2. leaves have air and feed two options. 3. optional multi-wing blade of stainless steel.
Product Usage: 1. blast stoves, plastic, printing of 2. cooling, drying 3. send machinery exhaust Features: 1. do single phase or three-phase power supply 2. leaves have air and feed two options. 3. choose export round, square or horn outlet nozzle outlet
Product description: 1.Ls-30, 1/2hp, 0.37kw ; ls-301, 1hp, 0.75kw 2.Light weight, the housing of machine is cast by aluminum alloy. 3.All superior materials are made and manufactured in taiwan, exceptional quality. 4.Professional designs of motors, provides stable air flow. 5.Two types of whole set look: with foot mount or without. Choose according to customer machine designs. 6.Particular designed of square shap of outlet designs for blow powerful air flow, also we have designed extra flange of 4. Circle outlet and trumpet shap outlet toward different needs.
