Freezing and drying process of LGJ-100F (silicon oil heating) are finished in the same place (patented product). It changes the cumbersome operation of the drying process in the past, prevents the contamination of materials, and realized dry sublimation automatically. The model is equipped with shelf heating and has programmable functions. It can memorize freeze-dried curves for users to observe the lyophilization process of materials.ã?? ã?? This model is not only suitable for the freeze drying of bulk (liquid, pasty, solid) conventional materials, but also suitable for the drying of the vials materials. When the materials are ready for freeze-drying, they are put into in the vial, then begin freeze drying before the vial's lid unsealed. The capping device compacts the vials' lids after freeze drying to prevent secondary pollution, re-adsorb water, and facilitate long-term storage.
This LGJ-18 Multi Manifold Type Vacuum Freeze Dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered. It is a kind of the small vertical freeze-drying unit with shelf heating and programmable functions. Features of the LGJ-18 Multi Manifold Type Vacuum Freeze Dryer With sample pre-frozen function, large cold trap opening, no inner coil,and low temperature refrigerator is needless. Patented gas diversion technology, and strong ice holding ability. World- known brand compressors, high efficiency, long life, low noise. Well-known brand vacuum pump with a high pumping speed to achieve a higher ultimate vacuum. Vacuum pump protection function can set the cold trap temperature to protect the vacuum pump life. Applications of the LGJ-18 Multi Manifold Type Vacuum Freeze Dryer Suitable for freeze-drying of bulk liquid, pasty, solid conventional materials. It can be equipped with a flask outside the drying chamber to dry the frozen material on the inner wall of the bottle. At this time, the flask is connected to the manifold as a container. The material in the flask is heated by room temperature, and the multi-manifold switch can be used to remove or install the flask at any time without downtime.
The LGJ-12 Standard /Top-Press Type Vacuum Freeze Dryer widely used in medicine, pharmacy, biology research, chemical industry and food production,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered.LGJ-12 is suitable for experiment in laboratory or small quantity of production. It can meet the regular freeze drying requirments of the most laboratory. Features of the LGJ-12 Standard /Top-Press Type Vacuum Freeze Dryer . All-in-one structure , small size, no external flange, easy to use, no leakage. . All materials in contact with the product use inert materials to meet the requirements of the GLP. . The cold trap and console are made of stainless steel, which is anti-corrosion and easy to clean. . All stainless steel inflated /water release valve is designed and produced by our company, which is safety, anti- corrosion, no leakage. . With sample pre-frozen function, large cold trap opening, no inner coil,and low temperature refrigerator is needless. . Patented gas diversion technology, and strong ice holding ability.
Material: Warp proof self-extinguishing UL approved PVC, 94V-0 flammability rating. Color: Grey,White,Blue,Black Certificates:ROHS,CE These devices are for routing of wires within devices in factory installations. Features parallel holes on both sidewalls to facilitate cutting in wire application. Special color, size, length upon request of reasonable quantity.
Applications of the LG-5 Food Type Freeze Dryer for sale This LG-5 Food Type Freeze Dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc. Features of the LG-5 Food Type Freeze Dryer Pre-freezing and drying of separate structures are performed at the same time, which improves the freeze-drying efficiency and shortens the freeze-drying time. Space alloy separator material, double-sided radiation heating, emissivity above 90%, good temperature uniformity. Highly efficient mixed refrigerant medium, lower freezing point and higher boiling point, high heat exchange efficiency and long service life. The drying curve optimization control algorithm can control the heating rate and vacuum value in the drying stage. The patented gas diversion design and control technology have the strong ice catching ability and high drying efficiency. Industrial-grade embedded touch screen + dedicated SH-HPSC-III modular controller, the system is stable and reliable, with high control accuracy. The professionally designed FD-MANAGER control system can save multiple sets of process recipes, and can adjust the process in real time during the drying process to improve the process optimization rate. Flexible manual + automatic control mode, manual groping process, and automatic batch production. Accurate sensor calibration function ensures the accuracy of long-term use of process parameters. Setting user level and password, and decentralizing operations and management. Optional powerful LYO-MEGA main unit control system can record, save up to ten years of operating data, curves and alarm records, improve product trace ability; at the same time convenient observation, operation and fault diagnosis. Non-standard freeze dryers can be customized as requested.
LG-20 Food Type Freeze Dryer achieves continuous lyophilization through optimized structure,and 50% efficiency increased. It can memorize freeze-dried curves for users to observe the lyophilization process of materials. Features of the LG-20 Food Type Freeze Dryer Pre-freezing and drying of separate structures are performed at the same time, which improves the freeze-drying efficiency and shortens the freeze-drying time. Space alloy separator material, double-sided radiation heating, emissivity above 90%, good temperature uniformity. Highly efficient mixed refrigerant medium, lower freezing point and higher boiling point, high heat exchange efficiency and long service life. The drying curve optimization control algorithm can control the heating rate and vacuum value in the drying stage. The patented gas diversion design and control technology have the strong ice catching ability and high drying efficiency. Industrial-grade embedded touch screen + dedicated SH-HPSC-III modular controller, the system is stable and reliable, with high control accuracy. Applications of the LG-20 Food Type Freeze Dryer for sale This LG-20 Food Type Freeze Dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered.
This LGJ-10 Multi Manifold Standard Type Vacuum Freeze Dryer is widely used in medicine, pharmacy, biology, chemical industry and food production ,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered.This model is suitable for experiment in laboratory and small amount production ,and it can meet the regular freeze dying requirements of the most laboratories. Features of the LGJ-10 Multi Manifold Standard Type Vacuum Freeze Dryer . All-in-one structure , small size, no external flange, easy to use, no leakage. . All materials in contact with the product use inert materials to meet the requirements of the GLP. . The cold trap and console are made of stainless steel, which is anti-corrosion and easy to clean. . All stainless steel inflated /water release valve is designed and produced by our company, which is safety, anti- corrosion, no leakage. . With sample pre-frozen function, large cold trap opening, no inner coil,and low temperature refrigerator is needless. . Patented gas diversion technology, and strong ice holding ability. . World- known brand compressors, high efficiency, long life, low noise. . Well-known brand vacuum pump with a high pumping speed to achieve a higher ultimate vacuum. . Vacuum pump protection function can set the cold trap temperature to protect the vacuum pump life. . Professionally designed FD-LAB freeze-drying machine control system + SH-HPSC-I modular controller with high reliability and stability. . Intelligent data recording system can real-time record and display the cold trap temperature curve, sample temperature curve, vacuum curve.
Cooling System For Outdoor Cabinet, Electrical Panel Enclosure, Battery Cabinet.
air conditioner for outdoor electrical control cabinet, battery enclosure.
This GZL-2 water-cooled Pilot Freeze Dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered. Main features of the GZL-2 water-cooled Pilot Freeze Dryer 1. It is our company's patented product . Freezing and drying is finished in the same place. It is easy to operate,and have a good drying effect. 2. Patented gas diversion technology, uniform ice catching in cold traps, and strong ice catching capability. 3. Internationally renowned brand compressors, high efficiency, long life, low noise. 4. Separator patented technology and partition temperature fuzzy control technology, the shelf temperature difference is small, the temperature control accuracy is high, and the drying effect is even. 5. The freeze-drying curve optimization control technology can control the cooling rate in the pre-freeze phase, and at the same time, it can control the sample heating rate and the current stage vacuum degree in the sublimation and analytical drying stages.
Product: Panasonic Inverter Air Conditioning Dehumidification Type Room Air Conditioner Quantity: 5000 Units Price: US$ 310/unit (FOB Japan) Note: These ACs were installed in recent Olympic Games in Japan and were never used. Panasonic - Inverter Air Conditioning Dehumidification Type Room Air Conditioner CS-221DJ Mold-resistant standard model equipped with "Nanoe X" Mold-resistant air conditioner * 1, High-concentration "Nanoe X" is resistant to mold inside the air conditioner Quickly cool, comfortable air conditioning that does not rely on the wind at once cool in the "start-up" temperature shift not expose the cold air directly to the body in the ceiling shower stream. Air conditioning operation in the smartphone from outside the premises smartphone â?» 2 operation in the â?» 3 because can be convenient and comfortable "moisture heating" in a humidified air cleaner cooperation â?» 4 achieve * 1 [Test institution] Japan Food Research Laboratories [Test method] Confirmation of growth of mold bacteria attached to cloth in the test room (about 6 tatami mats) [Disinfection method] Release "Nanoe" [Target] ] Adhering mold fungus [Test result] Confirmed suppression effect in about 8 hours (June 14, 2013, No. 13044083002-01) * 2 Please see here for compatible OS. https://panasonic.jp/aircon/app/setup.html * 3 Depending on the smartphone settings and communication environment, the screen may not be displayed correctly or some functions may not be available. * 4 For cooperation, the humidified air purifier needs to be set with the "Mill Air App" and the air conditioner needs to be set with the "Aeolia App".
Roof ventilators provide cost effective, general purpose exhaust ventilation of commercial buildings as well as a large variety of industrial applications. Direct and belt driven models are available with cast aluminum, adjustable pitch or fabricated steel, fixed pitch impellers to meet specific application
Roof ventilators provide cost effective, general purpose exhaust ventilation of commercial buildings as well as a large variety of industrial applications. Direct and belt driven models are available with cast aluminum, adjustable pitch or fabricated steel, fixed pitch impellers to meet specific application.
We have designed & develop Powered FRP base Roof Exhaust Fans as per todays industrial needs for almost 90% of manufacturing and process industries to help them in improving the best working environment. These fans provide exhaust capacity of 10000 CFM, which is almost 20 times more effective as compared with the powerless roof ventilation fan. Products Motor (hp) Fan Speed CFM Powerless 24 N/A N/A 250 Motorized 24 1 1440 8,000 Motorized 32 1.5 960 10,000
This LGJ-10FD Electric Heating Freeze Dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc. LGJ-10FD Electric Heating Freeze Dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered. Freezing and drying process of LGJ-10FD (electric heating) are finished in the same place (patented product). It changes the cumbersome operation of the drying process in the past, prevents the contamination of materials, and realized dry sublimation automatically. The model is equipped with shelf heating and has programmable functions. It can memorize freeze-dried curves and comes with u-disc extraction function for users to observe the lyophilization process of materials.
This LGJ-30FD Electric Heating Freeze Dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production ,etc. After the freeze drying process,a long term preservation is much easier. They can be restored to the original state and maintain their chemical and biological characteristics after being watered. Freezing and drying process of LGJ-30FD (electric heating) are finished in the same place (patented product). It changes the cumbersome operation of the drying process in the past, prevents the contamination of materials, and realized dry sublimation automatically. The model is equipped with shelf heating and has programmable functions. It can memorize freeze-dried curves and comes with u-disc extraction function for users to observe the lyophilization process of materials.
Air Conditioning And Refrigeration (ACR) started with manufacturing of Air Conditioning & Refrigeration compressors (equipment group) and expanded into refrigeration projects. Projects sub-division undertakes Lump Sum Turn Key (LSTK) Projects which include planning, designing, manufacturing, installing and commissioning of Refrigeration Systems. Air Conditioning and Refrigeration Systems offers three product lines namely â?? Reciprocating Open Type Compressors (Cold Chain applications), Process Refrigeration Systems (Refinery and Petrochemicals, Chemicals, Fertilizers and Marine) and Vapour Absorption Chillers (Process Cooling and Air Conditioning). ACR equipment ranges from 50 to 500 TR, Vapour Absorption Chillers from 90 to 500 TR and Refrigeration Systems up to 800 TR. ACR â?? has four Business Groups that are independently monitored. These groups are: * Equipment (Compressors for refrigeration system), Refrigeration Systems (Industrial refrigeration packages, Customized turnkey projects) * Screw compressor package *Containerized Ice , water chilling plants & Marine HVACR *Vapour Absorption Chillers (HP Steam Driven VACâ??s and Direct Fired VACâ??s Reciprocating Compressors Kirloskar at the Heart of Industrial Refrigeration. KPCLâ??s reciprocating compressor range includes KCX (Air Cooled), PCX (Air Cooled) Series of Compressors, used in various applications of AC&R. KPCL has 60+ years of experience in Compressor manufacturing for Refrigeration. Kirloskar is a leading manufacturer in the world. The reciprocating range of refrigeration compressors has wide applications in the area of industrial refrigeration which includes food & beverage processing and preservation like Fruits & Vegetable cold storages, Dairies, Ice cream, Breweries, Beverages, Ice plants, Meat Processing, Fish Processing, and process refrigeration which includes pharmaceuticals, chemicals etc. These ranges also cater to HVAC applications including water chilling etc. Market Leader for Last 40+ Years in Industrial Refrigeration application: Superior COP(Coefficient of Performance) values at full and part load operation, modest capital investment and low maintenance cost are some of the Key benefits of KPCLâ??s refrigeration compressor that makes it the first choice of customer. These Compressors are suitable for use with variety of refrigerant including R-717 (NH3), R-22 and other HFC
OGENERAL 1.1 Ton 4 Star Window AC (AMGB12FAWA) o general window ac available at best prize with best offers and deals at grozmart
OGENERAL 1.1 Ton 4 Star Window AC (AMGB12FAWA) o general window ac available at best prize with best offers and deals at electrohubs
Product Description: We are instrumental in fabricating high quality Batch Type Oven which is used in many applications such as sterilizing, curing, drying as well as in numerous process-critical applications. In order to cater to the varying needs of our esteemed patrons, we are availing it within different sizes. We contrived it from latest technologies to make it comply with the international quality standards. It is highly appreciated for its long lasting flawless performance and high operational accuracy. Within competitive price range, we are offering it with below enlisted salient attributes: 1.Robust construction, 2.High durability, 3.Energy efficient
