LA2-DT2 Time Delay for CJX2 LC1 contactor auxiliary blocks and contactor coil combine with LC1-D AC contactor and LA1-D Auxiliary contact block into LC3-D star delta reduced voltage starter in motor starting application.
Eco Building Block
Environment Friendly
Now-a-days Eco-friendly bricks in the form of concrete blocks are gaining popularity in Bangladesh as a means to mitigate the environmental damage caused by conventional brick. House Building Research Institute (HBRI), a component of the Ministry of Housing and Public Works has been working for over 40 years to develop a substitute for conventional bricks in the construction industry. Subsequently, we are providing eco-friendly Construction Materials which are economical & eco-friendly. For national interest to make a solution to this problem instead of burnt brick, we have taken ASTMC-140 technology with PLC controlled Siemens machines. In its production procedure no gas, wood or coal is used as fuel for that no refusal or gas is produced from that.
Product Name: quincunx cushion block concrete spacer, Concrete Block Spacer , Square Gray Cement Cover Block
Product specification: the thickness of protective layer can be 35mm or 40mm or 50mm
Product color: Cement ash
The company specializes in the production of concrete cushion blocks, high-speed railway cushion blocks, cement cushion blocks, bridge cushion blocks and reinforcement protective layer cushion blocks, which are widely used in the construction of high-speed railways, subways, tunnels, expressways, bridges, airports, wharfs, civil buildings and other projects.
Summary of high strength concrete cushion blocks:
1. High cushion block strength
It is made from a special formula through long-term test. The compressive strength reaches 60MPa and is not easy to break. Its practicability is greatly high
Apply to cushion blocks of other materials.
2. The materials with high durability are the same as that of concrete, with strong adhesion, consistent expansion coefficient and even steam
There is no gap during curing, which can be fully integrated with concrete and effectively prevent air, rain, sea water, etc
The reinforcement corrosion caused by penetration and the concrete falling off, without the worry of mortar and plastic cushion block, greatly improves the reinforcement
Durability and safety of concrete.
3. The protective layer is highly accurate
The high-strength concrete cushion block has accurate overall dimensions and is engraved with the steel seal of the height of the protective layer, which is completely different from the mortar cushion
Randomness of blocks.
4. No color difference after demoulding
Small contact surface between cushion block and formwork, high stability, no "patch" after demoulding, consistent overall feeling, especially suitable for
Fair faced concrete structure.
5. Low total alkali content
The use of environmentally friendly materials and low total alkali content.
Top Ceramic Tile Company in is a one-stop online
Silicon pavers is the leading tile company in . Our experienced team offers a huge range of tiles, at the lowest possible prices, so you can find the perfect floor or wall tile for your home. We know that seeing and feeling the tiles is important, so we have physical stores in addition to our online shop. With Silicon Pavers, you're guaranteed quality tiles at an affordable price.
At Silicon Pavers, we offer the best quality tiles at the lowest possible prices. Our extensive range of tiles means that you're sure to find the perfect floor or wall tile for your home. We know that it's important to see and feel the tiles before you buy, so we have physical stores in addition to our online shop. With Silicon Pavers, you're guaranteed quality tiles at an affordable price.
Ready mix concrete- RMC in . The company is certified As Per ISO and QCI Norms, we have been Recognised by major Builders And Developers In for supplying the best quality Ready mix concrete with excellent service practices. The promoters are having more than two decades of experience In the manufacturing and supplying Ready mix concrete we successfully manufactured and supplied over 2 million cubic
UNISURFACE - Precision Meets Performance in Microsurfacing
The UNISURFACE Microsurfacing Paver by Alltech combines cutting-edge technology with robust engineering to redefine road maintenance efficiency. Designed for durability and precision, it delivers smooth, long-lasting pavement finishes with ease.
Key Specifications:
Body Structure: Heavy-duty chassis built for rugged performance.
Cold Aggregate Bin: High-capacity dual-bin system for seamless material flow.
Emulsion Tank: Insulated tank with precise temperature control.
Additive System: Accurate dosing unit for enhanced material properties.
Mixing System: High-speed pug mill mixer for perfect material blending.
Application Width: Adjustable screed width for flexible road coverage.
Control Panel: User-friendly automation for accurate material proportioning.
Why Choose UNISURFACE?
Durable Build: Withstands challenging conditions with minimal wear.
Precision Application: Ensures uniform thickness and smooth finishes.
Enhanced Productivity: Streamlined operations for faster project completion.
Take your road maintenance to the next level with the UNISURFACE Microsurfacing Paver.
Alltech group are professional manufacturer & Exporter of Asphalt Batch Mix Plant, Bitumen Decanting Equipment, Coal Fired Burners, Bitumen Storage & Bitumen handling equipment, Micro surfacing Machine. We are Original Equipment Manufacturers. Alltech Industries are known for strength, Quality and Endurance. Our products, Services and Machinery has helped Road Contractors to build roads of Utmost quality, Showing resilience comfort and long life. Alltech Make Micro surfacing Paver "UNISURFACE8000" is an eco friendly Surface Treatment used to Restore and Preserve the surface characteristics of the Road. It is One of the most advanced pavement Maintenance Treatments available today . "Unisurface 8000" is available with daily production capacity of 1500 Sq.m to 9200 sq.m.
Superior Quality, innovation, and performance have always been our priority. We are waiting to hear something from you relating to your queries.
Description:
Repair 1 : is a one component cement based polymer modified high build repair and reprofiling mortar
Usage:
- For repairing all types of structures
- Overhead and vertical repairs
- Hand applied repairs
- For exterior and interior use
Advantages:
- Just add water
- Can be used on horizontal and vertical surfaces
Surface Preparation:
- The surface must be clean, dry, smooth and solid.
- Particles hampering adhesion like dirt, oil and paint must be removed from the surface.
- Highly absorbent surfaces must be saturated with water before application. No water accumulation should be left on the surfaces.
Colour: Grey
Shelf Life:18 months from date of production if stored properly in original, unopened and undamaged sealed pack.
Storage Conditions: Store in dry conditions. Protect from moisture and direct sunlight.
Packaging: 25kg/barrel and 5kg/ barrel
Description
Crack PU is a 2-component, 100% solids, moisture-tolerant, epoxy adhesive. It is a low-viscosity, high-strength adhesive formulated specifically for grouting both dry and damp cracks.
Where To Use
Use neat for gravity feed or pressure injection of cracks in structural concrete, masonry, wood, etc.
Seal interior slabs and exterior above grade slabs from water, chlorides and mild chemical attack and to improve wearability
Advantages
- Tenacious crack-sealing grout.
- Convenient easy mix ratio A:B = 2:1 by volume.
- Advanced low-viscosity structural resin.
- Unique, high-strength adhesive for (canâ??t dry) cracks.
Usage
Crack PU is used to fill and seal cavities and cracks in structural components such as columns, beams, foundations, decks and waterretaining structures. It not only forms an effective barrier against water infiltration, but also bonds the concrete sections, together, thereby restoring original structural strengths.
Shelf life
Expiry date 18 months from the production date
Storage conditions
Dry, cool, shaded place
Packaging
1) Combo A: 2kgs - B: 1kg
Component A is clear liquid: 2kgs/ plastic can
Component B is clear liquid: 1kg/plastic can
2) Combo A: 5kgs - B: 2,5kgs
Component A is clear liquid: 5kgs/ plastic can
Component B is clear liquid: 2,5kgs/plastic can
3) Combo A: 10kgs - B: 5kgs
Component A is clear liquid: 10kgs/ plastic can
Component B is clear liquid: 5kgs/plastic can
4) Combo A: 20kgs - B: 10kgs
Component A is clear liquid: 20kgs/ plastic can
Component B is clear liquid: 10kgs/plastic can
5) Combo A: 30kgs - B: 15kgs
Component A is clear liquid: 30kgs/ plastic can
Component B is clear liquid: 15kgs/plastic can
Description
Hardener Liquid: is Dustproof, shiny, sodiium silicate-based water repellent liquid surface hardener designed for application to concrete and cement based floors. It penetrates deeply into the surface zone of the concrete and provides permanent hardness.
Applications
- Airplane hangars
- Electronic assembly plants
- Manufacturing plants
- Warehouses and distribution centers
- Shipping and receiving areas
- Maintenance facilities
- Commercial and industrial floors
- Where light-reflective flooring is desired
- Floors subject to heavy or frequent traffic
- Multi-purpose sporting facilities
Application steps
Preparation: Grinding of concrete floors by sandpaper grinder and take away all debris, cement powder on the floor surface and then clean it
Spray onto the concrete surface. Spray 2 coats. Each spray is 24-48 hours apart
Important Note
- If the paint becomes stagnant can appear white chalk phenomenon
- If the layer is too thick it will can not dry out
Storage Conditions
Product must be stored in original, unopened and undamaged sealed packaging in dry conditions
Colour
Clear
Shelf Life
12 months from date of production
Consumption
- 3kg Liquid: approximately application 15 m2
- 7,8kg Liquid: approximately application 40 m2
- 30kg Liquid: approximately application 150 m2
Celuler lightweight concrete block are made by Flyash and cement and Foming agent. It's long life and cost effective Product in construction. We can save nearly 40 percent of cost.
Part A (Epoxy): 15kg
Part B (Hardener): 5kg
Mix Ratio: Part A: Part B=3:1
Barrel A Size: 30*30*37cm
Barrel B Size: 25*25*29cm
Application Range
Structural crack repairing, low pressure injection of cracks in structural concrete, masonry, wood, etc.
The products are widely used in crack glue injection repair of concrete bridges, houses, water conservancy, roads and other projects, and reinforcing glue injection repair of concrete internal cellular, looseness and other defects, anti-corrosion construction of glass steel, structural surface coat.
It is suitable for pouring bond of cracks generated by concrete members and brick members, to achieve repairing and reinforcing cracks.
400 psi cement hollow blocks with stone design
4 inch x 40 cm length x 20 cm width - 11.5 kg / piece
5 inch x 40 cm length x 20 cm width- 12 kg / piece
Durable and long-lasting: Our paver blocks are made from high-quality materials and are designed to withstand even the most demanding conditions. They are perfect for commercial and residential use, and they will last for years to come.
- Stylish and versatile: Our paver blocks come in a variety of colors, sizes, and shapes, so you can find the perfect look for your project. They are also very versatile and can be used for a variety of applications, including walkways, patios, driveways, and more.
-Easy to install and maintain: Our paver blocks are easy to install and maintain. They can be installed by anyone with basic DIY skills, and they require very little maintenance.
-Affordable and cost-effective: Our paver blocks are a great value for the price. They are more affordable than other types of paving materials, and they will save you money in the long run because they are so durable.
112 Construction Blocks Suppliers
Short on time? Let Construction Blocks sellers contact you.
