Description BZ100N single gas detector that can detect the concentration of CO, H2S and O2 in the ambient air. With ultra-low-consumption and lightweight design, it is the smallest detector from China, only the size of a palm. It is suitable for petroleum, chemical, metallurgy, mining, underground pipeline, tunnel and other industries. Key Features The smallest detector from China (palm size) 2-year disposable gas detector Low-consumption 16-bit MCU to ensure long battery life Wide viewing-angle graphic LCD display Configurable high and low alarm points, two levels of alarm Battery low voltage alert Automatic calibration to reduce detection error Data upload function (Bluetooth) STEL and TWA alarms for toxic gases Automatic self-test function after power-on ATEX and IECEx approved
BX176 portable single gas detector can make continuous detection to combustible and toxic gases. It is suitable for combustible and toxic gas leakage detection in underground pipe or mines, and keeps the workers safe, prevents the facilities from being destroyed. Key Features 2000 detected records Two alarm level, adjustable Calibration point adjustable STEL alarm and TWA alarm for toxic gases Visual, audible, vibrating alarm Self protection against high concentration combustible gas Low battery alert Data uploading Password management Self-test when power on Self-diagnostic and self correction function
Description BX171 is a disposable portable single gas detector that can detect H2S, CO and O2 with small size and firm configuration. It is mainly intended for individual used to detect a confined space or the working environment where dangerous gases existed and harm to personal safety. It is normally clipped on belt, lapel or breast pocket. It can be widely used in the oil and gas industries, steelworks, chemical plant, mining,marine, power plants, sewage treatment plant, environmental protection, city construction, labs etc. Key Features ATEX approved Low power consumption Two alarm level STEL alarm, TWA alarm Visual, audible, vibrating alarm Confidence beep Low battery alert
Brief Introduction of Sunkye R066 Electric Rectangular Connector Contact spacing: 1.905 mm Contact arrangements and contact no.: 2 raws: 10, 20, 30, 40, 50, 60, 70, 80, 90, 100pins 3 raws: 11, 23, 35, 47, 59, 71, 80, 92, 104, 122, 140, 152, 182, 206 pins 4 raws: 86, 110, 164, 196, 204, 220, 250, 276, 300, 404 pins 6 raws: 162, 204, 252, 300, 360, 402 pins Termination type: solder contact, straight to PCB, right angle to PCB, SMT and wire wrap, etc. Meet standard of mil dtl 55302 Specification of Sunkye R066 MIL C 55302 Connectors Rated current: 3A Contact resistance: â?¤ 15m�© Environment temperature: -65â??~+125â?? Insulation resistance: â?¥ 5000M�© Dielectric strength: 750V Vibration: 10Hz~2000Hz, 147m/s�² Durability: 500 times Shock: 980m/s�² 6ms If you want to buy mil dtl 55302 series connector, please contact us. Sunkye is uniquely qualified to deliver turnkey custom solutions and mil spec connectors manufacturer for a complete range of high-performance applications. Our industry-leading materials knowledge, engineering design experience, and testing capabilities are key to achieving reliable service in the most extreme environments. You'll find a large selection of popular Mil-Spec military connectors such as MIL-DTL-83513 micro connector, MIL-DTL-38999 iii connector, MIL-DTL-32139 nano connector, MIL-DTL-26482 automotive connector, d-sub, micro-d connectors, and more, available in standard or custom configurations of mil connector.
Nano Straddle Flexible SMT Connector for Choice Sunkye R06 Mil Spec Straddle Flexible SMT Connector Description of Nano Straddle Flexible SMT Connector Features of Sunkye Nano Straddles Flexible SMT Connector Gold alloy Twist Pin contacts. Contacts number: 9, 15, 21, 25, 31, 37, 51, 65, 69. The connector is free mounted, not fixed, and usually mated with a receptacle that has a nut. Recommended JC (straight slot screw) types of screws. Tight by a miniature straight screwdriver. Choosing the JC1 (hex) type of screws, tight by 1.27 mm sub tense screwdriver. PC tail solder on flexible PCB, PCB thickness is 0.25MAX. Working temperature environment: -55â??~+125â??. Machine life: 200times. Nano Surface Mount USB Connector hardware includes jackscrew or female threaded shells. Applications include down-hole electronics, missile systems, launch vehicles, and satellites. M32139 type dual row nano miniature rectangular connectors. Flex assembly, PCB thru-hole, surface mount, straddle mount or back to back cable configurations. Connector savers and EMI protective cover are also available. Nano miniature dual-row plug and receptacle connectors are offered in titanium, stainless steel or aluminum shells. Straddle connectors are configured with 0.635 mm contact spacing and DWV rating of 250 volts AC. Up to 11 contact layouts are available with three wire type options including Ultra lightweight insulation with gold-coated high strength copper; extruded PTFE insulation with silver coated copper, and cross-link modified ETFE insulation with high strength silver coated copper.
Nano Sealed Connector for Choice Sunkye R06S Mil Spec Nano D Sub Connectors Description of Nano Sealed Connector Sunkye Nano sealed connector series features gold alloy Twist Pin contacts, Glass-sinter sealed can withstand high temperature and high voltage. The nano circular connectors can meet oil exploration and other harsh environment applications. This series products widely applied in the military, land ground defense, air or areas. Furthermore, Sunkye fully tests its hermetic Nano-D solutions to provide reliability and satisfaction to its customers. Helium leak rate is the most common and most reliable method to quantify a small leak. Based on its expertise, Sunkye can also design tailor-made nano circular connectors to fit your application needs. Hermetic sealed PCB connectors are used in applications where an enclosure needs to be isolated from the outside environment. Panel feed-through is the main application for this type of connector. In the vast majority of applications, the use of a hermetic encapsulate offers sufficient levels of hermeticity at a reasonable price. Only extreme environments require glass-to-metal sealing.
Nominal Voltage: 9.6V Nominal Capacity: 7200mAh Battery Type: Lithium Iron Phosphate Battery Battery Brand: VCELL/OEM Model: VP-LF9.6-7.2 Charge Cut-Off Voltage: 10.95V Discharge Cut-Off Voltage: 7.5V Standard charge current: 0.2C Max charge current: 1.0C Standard discharge current: 0.2C Max continuous discharge current: 3.0C Peak discharge current: 5C(2500 times Lifetime: >10 Years Wire/Connector: TBD
Black mass 8 MT - 7% Cobalt - 8% Nickle
Type: Lifepo4 Battery Rated Volt:51.2V rated capacity: 300Ah Energy:10KWH regular discharging current:60A rated discharging current: 150A a max. discharging current: 200A recommended charging current:50A lifecycle: 5000cycles warranty:3years
Type: Lifepo4 Battery Rated Volt:12.8V rated capacity: 100Ah regular discharging current 20A rated discharging current: 50A max. discharging current: 100A recommended charging current:20A lifecycle: 5000cycles warranty 3years Brand: Takum
Type: Lithium Battery Rated Volt:12V Rated capacityï¼?50Ah regular discharging current:10A rated discharging current: 25A Max.discharging current: 50A recommended charging current: 10A
PH meter Description Online pH / ORP meters and pH / ORP controllers are one of the most common water quality analysers in use today in water treatment and process plants and yet online pH / ORP meters cause continual problems for their operators. What is needed is a stable, reliable, online pH/ ORP analyzer for a reasonable cost. That is exactly what you get with the BOQU Instrument. A pH and ORP meter consist of a pH or ORP sensor, transmitter and process adaption, combined to best suit your pH control needs. The online ORP meter from BOQU Instrument provides accurate process pH measurements in a wide range of environments, from ultra pure water to hygienic measurements in a bioreactor to dirty chemical production. Our Advantages 1ã??Stable, Reliable,Precision,Continuous measurement pH,ORP and Temperature. 2ã??Instrument for panel mounted,wall mounted,pipe mounted. 3ã??2 ways of 4-20mA and standard RS485 Modbus RTU 4ã??Instrument provide High/Low control relay 5ã??Local Data logger function for 1000 times 6ã??Application:industrial waste water, drinking water environmental monitoring, ultra pure water,fermentation, food production process etc. If you need our online ph meter, you can contact us through our online chat window.
Online pH / ORP meters and pH / ORP controllers are one of the most common water quality analysers in use today in water treatment and process plants and yet online pH / ORP meters cause continual problems for their operators. What is needed is a stable, reliable, online pH/ ORP analyzer for a reasonable cost. That is exactly what you get with the BOQU Instrument. A pH and ORP meter consist of a pH or ORP sensor, transmitter and process adaption, combined to best suit your pH control needs. The online ORP meter from BOQU Instrument provides accurate process pH measurements in a wide range of environments, from ultra pure water to hygienic measurements in a bioreactor to dirty chemical production.
AIT1000-SG has a high gain and measurement accuracy in the full bandwidth range, due totheapplicationof the multi-point zero-flux technology system and high-frequency ripple sensing channel ontopof currentlyexisting DC sensor technology. The multi-point zero-flux technology system secures the high accuracy by utilizing thetechnologycombination of exciting magnetic flux closed-loop control, self-excited magnetic fluxgateandmulti-closed-loop control that realizes the closed-loop control between excitation magnetic fluxandAC/DCmagnetic flux generated by primary current, while the high-frequency ripple sensing channel allowsthesensor to have the high performance over the full bandwidth range.
Battery Brand: VCELL/OEM Battery Type: LiFePo4Battery Model: IFR26650 Nominal Voltage: 3.2V Nominal Capacity: 3600mAh Charge Cut-Off Voltage: 3.65V Discharge Cut-Off Voltage: 2.0V Standard charge current: 0.2C Max charge current: 1.0C Standard discharge current: 0.2C Max continuous discharge current: 3.0C Peak discharge current: 5C(2500 times
Glass Agencies are Manufacturer of Slit Lamp.
Insulating conduit is a tubular material used in electrical installations to protect wires and cables, preventing electrical short circuits or leakage. It is made from materials with high electrical insulation properties,effectively isolating electrical wires and cables from other conductive bodies or environmental factors that could cause damage. Besides providing electrical insulation protection, insulating conduit also offers certain levels of waterproofing, dustproofing, and corrosion resistance, ensuring the safe operation of electrical systems. Quality Control Measures for Insulation Casing The following are several important aspects of quality control in the production of silicone coated fiberglass sleeve and heat shrink tube sleeve and custom bulk silicone tubing: 1. Raw material inspection Raw material quality: Strictly inspect the quality of incoming raw materials (such as PVC, PTFE, silicone rubber, etc.), including physical properties, chemical stability, etc., to ensure that the raw materials meet production requirements. 2. Production process control Process parameter monitoring: Precise control of extrusion, vulcanization and other process parameters (such as temperature, pressure, speed, etc.) to ensure the stability of the production process and product consistency. Online inspection: Set up inspection points on the production line to monitor the appearance, size, thickness, etc. of the insulation sleeve in real time, and timely detect and correct production deviations. Equipment maintenance: Regularly maintain and calibrate production equipment to ensure its normal operation and production accuracy. 3. Finished product inspection Physical performance testing: Conduct physical performance tests on the finished product, such as tensile strength, elongation, and bending performance, to ensure compliance with design requirements. Electrical performance testing: Conduct insulation strength, voltage withstand tests, etc. to verify the electrical performance of the insulation sleeve. Environmental adaptability testing: Conduct high and low temperature tests, humidity and heat aging tests on insulation sleeves to evaluate their performance stability under different environmental conditions.
SMC/SPA Series SCR SNUBBERING CAPACITOR SMC/SPA series is special designed for the filtering, over-voltage protection, and damping absorption of semi-conductors, rectifiers, and thyristors in power electronic equipment. The self-healing capacitor elements are enclosed in a cylindrical aluminum/plastic case sealed with PU resin. They are made of metallized PP film, This enables the unit to carry high peak and high inrush currents with low self-inductance and series resistance. Dry type design, environmentally friendly and self-healing, support both horizontal and vertical installation.
Battery Brand: VCELL/OEM Battery Type: Lithium Polymer Battery Model: VP073538 Nominal Voltage: 3.7V Nominal Capacity: 850mAh Charge Cut-Off Voltage: 4.2V Discharge Cut-Off Voltage: 2.75V Standard charge current: 0.2C Max charge current: 1.0C Standard discharge current: 0.2C Max continuous discharge current: 1.5C Peak discharge current: 5C(700 times
HCV series high-precision voltage sensor is a voltage sensor that can measure DC, AC, pulse and variousirregular waveforms under the condition of complete isolation of the primary side and the secondary side. Itis mainly used in the field of measurement verification and measurement calibration that requires highaccuracy, and rail transit, power quality analysis, power analyzer, medical, aerospace, missile, ship andother fields that require high sensitivity, high stability and high reliability.